4Other

4.1Specifications

4.1.1Required environment and PC specifications

We recommend using a display capable of 1920x1080 resolution as the environment for setting up this product.Please read the manuals for the new X series cameras and non-AI cameras for the specifications of the PC used for camera setup.

4.1.2About this product


Items	Contents
Input	3ch
No. of ext. software to be installed	Up to 3 ext. software
Supported camera	- i-PRO camera - Other Company Camera (*1)
Received video format	Video format	JPEG, H.264, H.265 (*2)
Received video format	Resolution	- Recommended resolution: 2MP(1920x1080) or 1MP(1280x720) - Max. resolution: 1920x1080 - Min. resolution: 640x360
Available ext. software	- AI-VMD (AI Video Motion Detection) - AI People detection - AI Vehicle detection - AI Occupancy detection - AI Scene change detection Note : The AI analysis performance depends on the image quality, so it will be a best effort. Please check it with cameras you use on site.
Supported systems	Video Insight / Genetec / Milestone / i-PRO Active Guard for WV-ASM300

(*1): Non-AI cameras must meet the “Received video format” requirement. Also, a command to get MJPEG/RTSP stream is required.

(*2):

In the case of JPEG:
- The frame rate of the connected non-AI cameras must be 3-15fps(Recommended frame rate 5fps).
In the case of H.264:
- The total frame rate of the connected non-AI cameras must be within 15fps and the total bitrate must be within 3Mbps.
- Example:
- When connecting 3 non-AI cameras with X series camera: within 5fps and 1Mbps per channel.
- When connecting 2 non-AI cameras with X series camera: within 7.5fps and 1.5Mbps per channel.
- When connecting 1 non-AI camera with X series camera: within 15fps and 3Mbps.
- The frame rate of the connected non-AI cameras must be 3-15fps(Recommended frame rate 5fps).
In the case of H.265:
- The frame rate of non-AI cameras must be within 10fps and bitrate must be within 1Mbps.
- The frame rate of the connected non-AI cameras must be 3-10fps(Recommended frame rate 5fps).

Table 4.1In case of using MJPEG/H.264 for non-AI cameras
Number of non-AI cameras	Number of workable app for new X series camera (*3)	AI-VMD	AI People Detection	AI Vehicle Detection	AI Occupancy Detection	AI Scene Change Detection(*4)
3	1 (1)	Up to 1 app per each non-AI camera
2	2 (1)	Up to 2 app per each non-AI camera
1	3 (2)	Up to 3 app per each non-AI camera

Table 4.2In case of using H.265 for non-AI cameras
Number of non-AI cameras	Number of workable app for new X series camera	AI-VMD	AI People Detection	AI Vehicle Detection	AI Occupancy Detection	AI Scene Change Detection(*4)
1	Up to 3 applications can be used in total

(*3): Figures in parentheses indicate the number of extension software when using the 6MP model or 8MP model of the new X series camera.

(*4): AI Scene Change Detection is only available for one of the new X cameras and one of the non-AI cameras.

- Please refer to the following web page for information on compatible models and software versions of this product.
→ Technical Information [Control number: C0103]
- For information on combinations of extension software that can be used at the same time, please refer to the following web page.
→ Accessory Selector

- For "Video Insight with i-PRO Active Guard”, AI Occupancy Detection alarms are not supported because they do not go through i-PRO Active Guard.
- For “ASM300W with i-PRO Active Guard” supports only i-PRO cameras.
- When using Genetec / Milestone with i-PRO Active Guard / WV-ASM300W with i-PRO Active Guard, please use the new X series camera with "Alarm" > "Notification" > "TCP alarm notification" turned off.

Supported functions with AI Processing Relay for each system

Video Insight with i-PRO Active Guard
	AI-VMD	AI People Detection	AI Vehicle Detection	AI Occupancy Detection	AI Scene Chage Detection
Alarm Management	✓	✓	✓	N/A	✓
Similarity Search	-	✓	✓	-	-
Statistics dashboard	✓	✓	✓	✓	-

Genetec / Milestone with i-PRO Active Guard
	AI-VMD	AI People Detection	AI Vehicle Detection	AI Occupancy Detection	AI Scene Chage Detection
Alarm Management	✓	✓	✓	✓	✓
Similarity Search	-	✓	✓	-	-
Statistics dashboard	✓	✓	✓	✓	-

WV-ASM300W with i-PRO Active Guard ( only i-PRO Camera is supportted )
	AI-VMD	AI People Detection	AI Vehicle Detection	AI Occupancy Detection	AI Scene Change Detection
Alarm Management	✓	✓	✓	✓	✓
Similarity Search	-	✓	✓	-	-
Statistics dashboard	✓	✓	✓	✓	-

4.1.3Combination of this product and compatible software

This product must be used in combination with the corresponding AI software. AI Scene Change Detection can be installed on up to one of cameras 1 through 4.


Camera	AI Processing Relay software file name	Supported extension software file name
New X Series camera: camera1	ー	XAE200_vXXX.ext AIPeopleDetection_vXXX.ext AIVehicleDetection_vXXX.ext XAE207_vXXX.ext AISceneChangeDetection_vXXX.ext Other extension software for the new X series cameras
Non-AI camera: camera2	AIProcessingRelay-Cam2_vXXX.ext	XAE200-Cam2_vXXX.ext AIPeopleDetection-Cam2_vXXX.ext AIVehicleDetection-Cam2_vXXX.ext XAE207-Cam2_vXXX.ext AISceneChangeDetection-Cam2_vXXX.ext
Non-AI camera: camera3	AIProcessingRelay-Cam3_vXXX.ext	XAE200-Cam3_vXXX.ext AIPeopleDetection-Cam3_vXXX.ext AIVehicleDetection-Cam3_vXXX.ext XAE207-Cam3_vXXX.ext AISceneChangeDetection-Cam3_vXXX.ext
Non-AI camera: camera4	AIProcessingRelay-Cam4_vXXX.ext	XAE200-Cam4_vXXX.ext AIPeopleDetection-Cam4_vXXX.ext AIVehicleDetection-Cam4_vXXX.ext XAE207-Cam4_vXXX.ext AISceneChangeDetection-Cam4_vXXX.ext

4.1.4Camera to install this product

The camera this product works with is the new X series camera. Please install and use this product on the new X series cameras.

4.1.5Automatic acquisition of stream URLs by iCT

iCT acquires stream URLs from non-AI cameras. The following is the status of support for automatic acquisition.


Non-AI Camera	MJPEG	H.264	H.265
Cameras made by i-PRO	✓	✓ (*1)	✓ (*1)
Cameras made by other company	✓ (*2)	✓ (*2)	- (*3)

(*1): The stream URLs for H.264 and H.265 are the same. H.264 and H.265 are switched depending on the settings of the non-AI camera.

(*2): If you cannot get the stream URL in iCT, please enter it manually.

(*3): Enter the RTSP (H.265) stream URL manually.

4.1.6MJPEG stream URL for non-AI cameras

If iCT cannot automatically get the stream URL from a non-AI camera, the stream URL for the non-AI camera must be manually entered. Examples of MJPEG commands from various companies are shown below. The following commands are not guaranteed to work with all cameras. Please check the operation of your camera before use.


Manufacturer	MJPEG command example (Http Jpeg stream URL)	Full URL (Http jpeg stream full URL)	Camera setting
i-PRO	cgi-bin/mjpeg?stream=1&framerate=5	http://<camera IP>/cgi-bin/mjpeg?stream=1&framerate=5 or https://<camera IP>/cgi-bin/mjpeg?stream=1&framerate=5	Open the Image/Audio > Image settings screen of the i-PRO camera and make the following settings: - Refresh interval (JPEG): 5fps - JPEG(1) > Image capture size: 1920x1080, 1280x720 or 640x360
Advidia	video/mjpeg/stream1	http://<camera IP>/video/mjpeg/stream1	This command is for an advidia camera with stream1 set to MJPEG.The Advidia camera settings should be set to "No Authentication" and the connection from AI Processing Relay should be HTTP. Example: Setup > Security > NetworkSecurity > Authentication > HTTP Authentication = None
AXIS	axis-cgi/mjpg/video.cgi?resolution=1920x1080&fps=5	http://<camera IP>/axis-cgi/mjpg/video.cgi?resolution=1920x1080&fps=5 or https://<camera IP>/axis-cgi/mjpg/video.cgi?resolution=1920x1080&fps=5
Hanwha	stw-cgi/video.cgi?msubmenu=stream&action=view&Profile=1&CodecType=MJPEG&Resolution=1920x1080&FrameRate=5	http://<camera IP>/stw-cgi/video.cgi?msubmenu=stream&action=view&Profile=1&CodecType=MJPEG&Resolution=1920x1080&FrameRate=5 or https://<camera IP>/stw-cgi/video.cgi?msubmenu=stream&action=view&Profile=1&CodecType=MJPEG&Resolution=1920x1080&FrameRate=5	This command is used when MJPEG is set as Profile 1 on a Hanwha camera.
VIVOTEK	video1s1.mjpg	http://<camera IP>/video1s1.mjpg or https://<camera IP>/video1s1.mjpg
Dahua	cgi-bin/mjpg/video.cgi?channel=1&subtype=1	http://<camera IP>/cgi-bin/mjpg/video.cgi?channel=1&subtype=1 or https://<camera IP>/cgi-bin/mjpg/video.cgi?channel=1&subtype=1	If the aspect ratio cannot be set to 16:9, set 4:3.
Hikvision	ISAPI/Streaming/channels/102/httpPreview	http://<camera IP>/ISAPI/Streaming/channels/102/httpPreview or https://<camera IP>/ISAPI/Streaming/channels/102/httpPreview

- If the frame rate cannot be set to 5 fps in the non-AI camera settings, set the frame rate closest to 5 fps. (The minimum frame rate is 3 fps.)
- If the resolution of a non-AI camera cannot be set to 1920x1080 or 1280x720, set the closest value to 1280x720. (The minimum resolution is 640x360).

4.1.7JPEG one shot mode

JPEG one shot mode continuously receives JPEG images from a Non-AI camera and performs AI processing on the received images. Although MJPEG is recommended for this product, if your camera does not support MJPEG CGI, try the JPEG one shot mode. Please complete the installation of AI Processing Relay before following the steps below.

(1)

Enter the following CGI to enable JPEG one shot mode

http://<camera IP>/cgi-bin/adam.cgi?methodName=setApplicationPreference&appName=AiEncoderAppCam2&prefType=Integer&prefName=OneShot&value=1

camera IP : IP address of the camera where AI Processing Relay is installed

For appName, specify the following parameters to match the AI Processing Relay CamX you have installed.
AI Processing Relay Cam2 : appName=AiEncoderAppCam2
AI Processing Relay Cam3 : appName=AiEncoderAppCam3
AI Processing Relay Cam4 : appName=AiEncoderAppCam4

value=1 : JPEG one shot mode on
value=0 : JPEG one shot mode off (default value)

(2)

Configure AI Processing Relay with reference to 2.2.4　Install extension software for cameras 2, 3, and 4.
For "Stream URL", enter the command to receive JPEG one shot.

Example: i-PRO camera (single-lens camera)
cgi-bin/camera?stream=1

(3)

If an image is displayed in the Result column, the JPEG one shot mode is working.

- AI processing in JPEG one shot mode may not reach the recommended frame rate of 5 fps due to frequent communication with a Non-AI camera.

Examples of JPEG one shot commands from various companies are shown below. The following commands are not guaranteed to work with all cameras. Please check the operation of your camera before use.


Manufacturer	MJPEG command example (Http Jpeg stream URL)	Full URL (Http jpeg stream full URL)	Camera setting
Bosch	snap.jpg	http://<camera IP>/snap.jpg or https://<camera IP>/snap.jpg
Avigilon	media/cam0/still.jpg?res=max	http://<camera IP>/media/cam0/still.jpg?res=max or https://<camera IP>/media/cam0/still.jpg?res=max

4.2Trademarks and Registered Commercial Code

・

Internet Explorer and Microsoft Edge are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries.

・

Google Chrome is a trademark of Google LLC.

・

Firefox is a trademark of the Mozilla Foundation in the United States and other countries.

・

ONVIF is a trademark of ONVIF Inc.

4.3Open Source Software

This product uses the following open source software. See "Open Source Software" for the corresponding license statement.


Software name	License Name
libjpeg-turbo	The IJG (Independent JPEG Group) License, which is listed in README.ijg The Modified （3-clause） BSD License The zlib License
FFmpeg	GNU LESSER GENERAL PUBLIC LICENSE Version 2.1

Open Source Software

libjpeg-turbo Licenses

libjpeg-turbo is covered by three compatible BSD-style open source licenses:

The IJG (Independent JPEG Group) License, which is listed in README.ijg
This license applies to the libjpeg API library and associated programs (any code inherited from libjpeg, and any modifications to that code.)

The Modified (3-clause) BSD License, which is listed below
This license covers the TurboJPEG API library and associated programs, as well as the build system.

The zlib License
This license is a subset of the other two, and it covers the libjpeg-turbo SIMD extensions.

The Modified (3-clause) BSD License

Copyright (C)2009-2023 D. R. Commander. All Rights Reserved.
Copyright (C)2015 Viktor Szathmáry. All Rights Reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
- Neither the name of the libjpeg-turbo Project nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS", AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

GNU LESSER GENERAL PUBLIC LICENSE Version 2.1
COPYING.LGPLv2.1.txt

4.4Copyright

Transferring, copying, disassembling, decompiling, or reverse engineering the software contained in this product is prohibited (excluding open source software licensed under the GPL/LGPL or other policies). Exporting any software contained in this product in violation of export laws and regulations is also prohibited.

4.5Disclaimer

-

This product is designed to obtain images for surveillance of a specific area. This product is not intended to prevent crimes by itself.

-

Under no circumstances will we be held responsible for any of the following:

-

Any incidental, special or consequential damage or damage arising directly or indirectly in connection with this product

-

Any inconvenience, damage, or damage incurred due to the inability of an image to be displayed or recorded or the loss of recorded information due to any reason including failure or failure of this product

-

Failure or inconvenience, damage, or damage caused by a system combined with a third party device

-

Claims or claims for damages caused by breaches of privacy by individuals or groups that have become a subject as a result of the use of surveillance images and records that have become public due to some reason (including use with User Authentication Off).

-

The stored information is lost for some reason (including when this product is initialized due to forgetting the authentication information such as username and password)