Camera registration
Last update: June, 2023
Camera registration to Genetec Security Center
1. Start [Config Tool].
![](/products_and_solutions/sites/default/files/styles/webp/public/2023-05/ConfigTool_icon.JPG.webp?itok=zudPfDN2)
2. Enter your username and password, then click the [Log on] button.
![](/products_and_solutions/sites/default/files/styles/webp/public/2023-05/Log_on_icon.PNG.webp?itok=2PjmMBbZ)
3. Select to [Config Tool] - [Tools] - [Unit enrollment].
Alternatively, open the [Video] tab and click the [Video Unit] at the bottom left corner of the screen.
![](/products_and_solutions/sites/default/files/styles/webp/public/2023-05/Unit_enrollment1_0.JPG.webp?itok=zcwf36VV)
![](/products_and_solutions/sites/default/files/styles/webp/public/2023-05/Unit_enrollment2_0.JPG.webp?itok=spXgVNwS)
4. There are two methods for camera registration.
A. Manual.
B. Discovery.
A. Manual
A-1. On the [Unit enrollment] display, click [Manual add...] in the bottom right corner of the screen.
A-2. Select [Video].
![](/products_and_solutions/sites/default/files/styles/webp/public/2023-05/Unit_enrollment3_0.JPG.webp?itok=OMSPKhf5)
A-3. On the [Manual add] display, enter the information for the target camera.
- Input the IP address, Username and Password.
- Select the [Manufacturer] and [Product type].
Finally, click [Add] or [Add and close] button.
![](/products_and_solutions/sites/default/files/styles/webp/public/2023-05/Manual_add_icon.JPG.webp?itok=haHgFkHA)
A-4. The registration is complete when "Added" is displayed.
![](/products_and_solutions/sites/default/files/styles/webp/public/2023-05/Unit_enrollment4.JPG.webp?itok=ZQ3dCgmn)
B. Discovery.
B-1. Automatically detect and register a camera.
B-2. On the "Device Registration" screen, click the [Settings and Manufacturers] at the top right corner of the screen.
![](/products_and_solutions/sites/default/files/styles/webp/public/2023-05/Unit_enrollment5_1.JPG.webp?itok=qtc5gKT1)
B-3. If "i-PRO/Panasonic" is not displayed, click the [+Add manufacturer] and select [i-PRO/Panasonic].
![](/products_and_solutions/sites/default/files/styles/webp/public/2023-05/Unit_enrollment6.JPG.webp?itok=VRatX2Zk)
B-4. Click [Configure manufacturer].
Move the cursor to [i-PRO/Panasonic], and the [Configure manufacturer] icon will appear on the right side.
![](/products_and_solutions/sites/default/files/styles/webp/public/2023-05/Unit_enrollment8.JPG.webp?itok=yUAoPd5o)
B-5. If necessary, enter the [From] IP address and [Username / Password] for the search range and click the [Save] button.
![](/products_and_solutions/sites/default/files/styles/webp/public/2023-05/Unit_enrollment9.JPG.webp?itok=Q0W8CRky)
B-6. Click [Unit enrollment] - [Start discovery].
A list of detected cameras will be displayed.
![](/products_and_solutions/sites/default/files/styles/webp/public/2023-05/Unit_enrollment10.JPG.webp?itok=vOALpL_l)
B-7. When the registration is completed, the status of the camera in the list will be shown as "Added".
![](/products_and_solutions/sites/default/files/styles/webp/public/2023-05/Unit_enrollment11.JPG.webp?itok=KeEnzAVU)
5. The registration is complete when the Unit is displayed under [ConfigTool] - [Video] - [Archiver].
![](/products_and_solutions/sites/default/files/styles/webp/public/2023-06/Camera_registration_5.PNG.webp?itok=XMRZd6uc)
Genetec Security Center 5.11 / Driver Pack 11.3