2.Preparation

The flow up to operation is as follows. This chapter describes 1), 2), and 3).

1)

Install this product.
→ 2.1　Install this product

2)

Install extension software.
→ 2.2　Install extension software to be linked with this product

3)

Configure a camera to be linked with this product.
→ 2.3　Configure a camera to be linked with this product

4)

Start operation

2.1Install this product

1)

Access the product's download site and download [AI Processing Relay].

For the download site of this product, please refer to the following:
→ Click here for downloads

Do not use spaces or multi-byte characters in the destination directory name.

2)

Select "Setup" > "Detailed setting" > "Ext. software" > "Software mng." on the WV-S71300-F3.

3)

Click the "Choose File" button and select the downloaded "AIProcessingRelay_vXXX.ext".

4)

Confirm that "Install new Ext. software" is selected and click "Execute". Installation of the software starts. When the installation is complete, AI Processing Relay is added to the Extension software list and the Ext. software screen.

- Do not turn off the camera during installation.
- Do not perform any operation during installation until the installation is completed.

2.2Install extension software to be linked with this product

This product performs AI processing in conjunction with the following applications. Please refer to the manuals of each extension software for installation instructions.

-

AI-VMD (AI Video Motion Detection)

-

AI People detection

-

AI Vehicle detection

-

AI Occupancy Detection

2.3Configure a camera to be linked with this product

Configure the settings for the camera to be linked to this product. Please refer to the manual of the camera for the setting method. Set the following items.

-

Set the stream to output MJPEG data.

-

Set the resolution of the MJPEG data to 1920x1080 or 1280x720.

-

Set the frame rate of the MJPEG data to 5fps