1. Ana Sayfa
  2. WV-SPW611L

Kurşun/Kutu kameralar

WV-SPW611L i-PRO

Bullet Network camera

DISCONTINUED PRODUCT

Super Dynamic HD Weatherproof Network Camera

Successor model : WV-S1511LN

• 720p HD images up to 60 fps*1
• Multiple H.264 (High profile) streams (max. 4 streams) and JPEG streams ensure simultaneous real time monitoring and high resolution recording.
• Enhanced Super Dynamic*1 and ABS (Adaptive Black Stretch) technologies deliver 133 dB wider dynamic range compared to conventional cameras.
• Multi process NR & 3D-DNR ensures noise reduction in various conditions.
• High sensitivity with Day & Night (IR) function : 0.01 lx (Color), 0.003 lx (B/W) at F1.3
• IR LED equipped : The equipped infrared LED makes it possible to take pictures at zero lx.
• IR LED is controlled to match the environment, thereby the camera provides clear images of human faces without white blur.
• High Speed ABF (Auto Back Focus) and Motorized Zoom ensures easy installation.
• Face Super Dynamic technology ensures clear face image.
• Double SDXC/SDHC/SD Memory card slots for manual recording
(H.264 / JPEG), alarm recording (H.264 / JPEG) and backup upon network failure (H.264 / JPEG). Realize long-term recording and auto backup function.
• Face detection function detects the position of human face and the information is sent by XML or video stream. (Extension Software)
• Can be added new intelligent extension software in addition to built-in VMD (Video Motion Detection), alarm function.
• Fog compensation function equipped as standard.
• Super Chroma Compensation function realizes a better color reproducibility even in low illumination.
• Supports SSL, DDNS (viewnetcam, RFC2136)
• IP66 rated water and dust resistant. Compatible with IEC60529 measurement standard,Type 4X(UL50), NEMA 4X compliant.
• Dehumidification device for use with various weather conditions
*1 Super Dynamic function is automatically set off on 60 fps mode

Camera

COMPONENT SPECIFICATION
Image Sensor Approx. 1/3 type MOS image sensor
Scanning Mode Progressive scan
Scanning Area 4.864 mm (H) x 3.891 mm (V) {3/16 inches (H) x 5/32 inches (V)}
Minimum Illumination Color : 0.01 lx, BW : 0.003 lx (F1.3, Maximum shutter : Max. 1/30s, Gain : On(High))
BW : 0 lx (F1.3, Maximum shutter : Off(1/30 s), Gain : High, when the IR LED is lit) *1
Color : 0.0007 lx, BW : 0.0007 lx (F1.3, Maximum shutter : Max. 16/30s, Gain : On(High))
IR LED Light Off / Auto (High / Mid / Low)
IR LED irradiation distance Approx. 30 m {98.43 feet}
White Balance AWC (2,000 - 10,000 K), ATW1 (2,700 - 6,000 K), ATW2 (2,000 - 6,000 K)
Light Control Mode Outdoor scene / Indoor scene (50 Hz) / Indoor scene (60 Hz) / Fix shutter
Shutter Speed [1.3 mega pixel [16 : 9] (60 fps mode)]
OFF(1/60), 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000
[Other than 1.3 mega pixel [16 : 9] (60 fps mode)]
OFF(1/30), 3/100, 3/120, 2/100, 2/120, 1/100, 1/120, 1/250, 1/500, 1/1000,
1/2000, 1/4000, 1/10000
Super Dynamic On (High) / On (Normal) / Off
Face Super Dynamic On / Off (only when Super Dynamic : On)
Adaptive Black Stretch On / Off (only when Super Dynamic : Off)
Fog compensation On / Off (only when Super Dynamic / Adaptive black stretch : Off)
High light compensation(HLC) On / Off (only when Super Dynamic / Adaptive black stretch : Off)
AGC On (Low) / On (Mid) / On(High) / Off
Maximum shutter max. 1/1000 s, max. 1/500 s, max. 1/250 s, max. 1/100 s, max. 1/60 s,
max. 1/30 s, max. 2/30 s, max. 4/30 s, max. 6/30 s, max. 10/30 s, max. 16/30 s
Day & Night (IR) On / Off / Auto1 (Normal) / Auto2 (IR Light) / Auto3 (SCC)
Dynamic Range 133 dB typ. (Super Dynamic : On, Light Control Mode : indoor
Digital Noise Reduction High / Low
Video Motion Detection 4 areas, Sensitivity : 15 steps, Detection size : 10 steps
Privacy Zone / VIQS Up to 8 zones
Camera Title (OSD) Up to 20 characters (alphanumeric characters, marks)
Focus Adjustment ABF / MANUAL (Html only)
Lens Distortion Compensation 256 steps

Lens

COMPONENT SPECIFICATION
Vari Focal Length 2.8 mm - 10 mm {1/8 inches - 13/32 inches}, 3.6x
Angular Field of View [16 : 9 mode] Horizontal : 28.4 ° (TELE) - 96.2 ° (WIDE)
Vertical : 16.1 ° (TELE) - 52.8 ° (WIDE)
[4 : 3 mode] Horizontal : 28.4 ° (TELE) - 96.2 ° (WIDE)
Vertical : 21.4 ° (TELE) - 71.0 ° (WIDE)
Maximum Aperture Ratio 1 : 1.3 (WIDE) - 1 : 3.0 (TELE)
Focusing Range 0.3 m - ∞

Adjusting Angle

COMPONENT SPECIFICATION
Adjusting Angle Horizontal : ±100° (Camera mount bracket)
Vertical : +30°, -90° (Camera mount bracket)

Browser GUI

COMPONENT SPECIFICATION
Cropping Off/ JPEG(1)/ JPEG(2)/ JPEG(3)/ H.264(1)/ H.264(2)/ H.264(3)/ H.264(4)/ H.264(all)
Alarm action On / Off
Camera Control Brightness, AUX On / Off
Display Mode Spot, Quad : Image from 16 cameras can be displayed in 4 different Quad
screens or 16 split screen (JPEG only). 20 characters camera title available.
Digital Zoom 1x, 2x, 4x controlled by browser GUI
Camera Title Up to 20 alphanumeric characters
Clock Display Time : 12H/24H, Date : 5 formats on the browser, Summer time (Manual)
Alarm Control Reset
One Shot Capture A still picture will be displayed on a newly opened window.
Audio Mic (Line) Input: ON / OFF Volume adjustment: Low / Middle / High,
Audio Output: ON / OFF Volume adjustment: Low / Middle / High
SD Memory Data Download Still or motion Images recorded in the SDHC/SD memory
card can be downloaded.
GUI / Setup Menu Language English, Italian, French, German, Spanish, Portuguese, Russian, Chinese, Japanese
System Log Up to 100 (Internal)
Up to 4,000 (SDXC/SDHC/SD memory when the recording format is set to JPEG.) error logs
Supported OS Microsoft® Windows® 10, Microsoft® Windows® 8.1, Microsoft® Windows® 8,
Microsoft® Windows® 7, Microsoft® Windows Vista®
Supported Browser Windows® Internet Explorer® 11 (32 bit), Windows® Internet Explorer® 10 (32 bit),
Windows® Internet Explorer® 9 (32 bit), Windows® Internet Explorer® 8 (32 bit),
Windows® Internet Explorer® 7 (32 bit), Safari*, Google Chrome*, Mozilla Firefox*
* with limitations in the part of setting screen

Network

COMPONENT SPECIFICATION
Network IF 10Base-T / 100Base-TX, RJ45 connector
Image Resolution •1.3 mega pixel [16 : 9] (30/60 fps)
1,280 x 720 / 640 x 360 / 320 x 180 / 160 x 90
•1.3mega pixel [4 : 3] (30 fps)
1,280 x 960 / 800 x 600 / 640 x 480 / 400 x 300 /320 x 240 / 160 x 120
H.264 [Transmission Mode]
Constant bit rate / Variable bit rate / Framerate priority / Best effort / Advanced VBR
[Frame Rate]
1 / 3 / 5 / 7.5 / 10 / 12 / 15 / 20 / 30 / 60 fps
[Bit Rate/Client]
64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 1,536 / 2,048 / 3,072 / 4,096 / 6,144 /
8,192 / 10,240 / 12,288 / 14,336 / 16,384 / 20,480 / 24,576 / 30720*/ 40960* kbps
[Image Quality](Constant bit rate/Best effort)

Low(Motion priority) / Normal / Fine(Image quality priority)
[Smart Coding mode]
On (Low / Mid / High) / Off (Only when "Variable bit rate" is selected)
[Refresh Interval]
0.2 / 0.25 / 0.33 / 0.5 / 1 / 2 / 3 / 4 / 5s
[Transmission Type]
Unicast / Multicast
JPEG [Image Quality]
10 steps
[Refresh Intervaly]
0.1 fps - 30 fps (JPEG frame rate will be restricted when displaying both JPEG and H.264 images.)
[Transmission Type]
PULL / PUSH
Audio Compression G.726 (ADPCM) 32 kbps / 16 kbps, G.711 64 kbps / AAC-LC
Audio Mode Off / Mic (Line) input / Audio output / Interactive (Half duplex) / Interactive (Full duplex)
Authentication for Audio Level 1 only / Level 2 higher / All users
Total Bit Rate 64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 2,048 / 4,096 / 8,192 kbps / Unlimited
Supported Protocol IPv6 : TCP/IP, UDP/IP, HTTP, HTTPS, FTP, SMTP, DNS, NTP, SNMP,
DHCPv6, RTP, MLD, ICMP, ARP
IPv4 : TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP,FTP, SMTP,
DHCP, DNS, DDNS, NTP, SNMP, UPnP, IGMP, ICMP, ARP
FTP Client Alarm image transmission, FTP periodic transmission (When the FTP transmission
is failed, backup on an optional SDXC/SDHC/SD memory card is available.)
No. of Simultaneous Users Up to 14 users (Depends on network conditions)
SDXC/SDHC/SD Memory Card (Option) *Manufactured by Panasonic (SD speed class 4 or higher) * Use the SD memory card that complies with UHS-1 (Ultra High Speed-1) in the case of SD Speed Class 10. H.264 recording :
Manual REC / Alarm REC (Pre/Post) / Schedule REC /
Backup upon network failure Compatible(JPEG only)
JPEG recording :
Manual REC / Alarm REC (Pre/Post) / Backup upon network failure
Compatible SD (SDHC/SDXC) card :
Panasonic 2 GB, 4 GB*, 8 GB*, 16 GB*, 32 GB*, 64 GB** model
*SDHC card, ** SDXC card (except miniSD card and microSD card)
Employment of two SD cards Dual Recording for Redundancy, Series Recording for long time
Cellular Phone Compatibility JPEG image, AUX control (by access level)
Mobile Terminal Compatibility iPad, iPhone, iPod touch (iOS 4.2.1 or later), AndroidTM mobile termina

Alarm

COMPONENT SPECIFICATION
Alarm Source 3 terminals input, VMD, Command alarm, Audio detection alarm
Alarm Actions SDXC/SDHC/SD memory recording, E-mail notication, HTTP alarm notication
Indication on browser, FTP image transfer, Panasonic protocol output
Alarm Log With SDXC/SDHC/SD memory card : Up to 50,000 logs for each SD memory card
Schedule Alarm / VMD / Access permission / H.264 recording / Scene file

Input/Output

COMPONENT SPECIFICATION
Monitor Output (for Adjustment) VBS : 1.0 V [p-p]/75 Ω, composite, RCA jack
An NTSC or PAL monitor can be connected to the camera
(use the selector switch or software to select the monitor type).
Microphone/Line Input MIC IN and Line IN are selectable. ø3.5 mm monaural mini jack
(monaural input) (Applicable microphone: Plug-in power type)
Supply voltage : 2.5 V ±0.5 V, Input impedance : Approx. 2 kΩ (unbalanced)
Audio Output ø3.5 mm stereo mini jack (monaural output)
Output impedance : Approx. 600 Ω (unbalanced)
External I/O Terminals ALARM IN 1 (DAY/NIGHT IN), ALARM IN 2 (ALARM OUT), ALARM IN 3 (AUX OUT)

General

COMPONENT SPECIFICATION
Safety UL (UL60950-1), C-UL (CAN/CSA C22.2 No.60950-1), CE, IEC60950-1
EMS FCC (Part15 ClassA), ICES003 ClassA, EN55022 ClassB, EN55024
Power Source and Power Consumption WV-SPW611L :
When IR LED is On
DC power supply : 12 V DC / 1080 mA / Approx. 12.9 W
PoE (IEEE802.3af compliant) : 48 V DC / 360 mA / Approx. 12.95 W* (Class 0 device)
WV-SPW611:
DC power supply : 12 V DC / 670 mA / Approx. 8.1 W
PoE (IEEE802.3af compliant) : 48 V DC / 230 mA / Approx. 11.1 W* (Class 0 device)
* Maximum power consumption on the camera power input side.
** ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY.
Ambient Operating Temperature –40 °C to +50 °C (–40 °F to 122 °F)
Ambient Operating Humidity 10 to 90 % (no condensation)
Water and Dust Resistance IP66, IEC60529 measuring standard compatible,
Type 4X(UL50), NEMA 4X compliant
Dimensions *Installing using the base bracket 94 mm (W) x 89 mm (H) x 226 mm (L)
{3-3/4 inches (W) x 3-1/2 inches (H) x 8-7/8 inches (L)}
Mass (approx.) 1.4kg {3.09 lbs.}
Finish Main body : Aluminum die cast, light gray
Front cover section clear part : Clear polycarbonate resin

Specifications

Data Sheet

A&E Spec Sheet

Manuals

Installation Guide

User Manual/Operating Instruction

Firmware/Software

Firmware

WV-SPW631L etc. Firmware

WV-SPW631L etc. Firmware

NTSC/PAL
   How to upgrade firmware in 2 steps.
   (Click here for detail)

  • In case of firmware updating from 1.xx to 2.xx, you have to upgrade version 9.99 once, then upgrade 2.xx. Also for upgarding from 2.xx to 4.10 (or earlier), you have to upgrade version 4.00 once, then upgrade 4.10 (or later).

  • Please click here to request the firmware version 9.99 as providing the firmware is on request only; complete the form with the model number of your camera and "Request firmware version 9.99", then click "Submit" button.
    Please clear the cache memory or access with another internet browser if you cannot access the form.

  • Important information about backing up/restoring the settings data of camera firmware ver 1.71 or older (Click here for detail)

Release Note

Image/CAD/BIM

Image Data

CAD Data

BIM Data

WV-SPW6 Series BIM

WV-SPW6 Series BIM

Building information models (BIMs) files

Other

Technical Document

How to firmware two-stage version up

How to firmware two-stage version up

How to upgrade firmware version 2.00 (or newer) in 2 steps and/or version 4.10 (or newer).

WV-SFV631L, SFV611L etc. How to Upgrade (Ver1.71 or older)

WV-SFV631L, SFV611L etc. How to Upgrade (Ver1.71 or older)

Important information about backing up/restoring the settings data of camera firmware ver 1.71 or older
WV-SW397, SFN311 etc. Addendum

WV-SW397, SFN311 etc. Addendum

Added to Compatible SDXC memory cards
WV-SW598, WV-SFN310 etc. Addendum

WV-SW598, WV-SFN310 etc. Addendum

To prevent unintended camera access by unkown party

Close