WV-SFR310 i-PRO

Indoor Dome Network camera

DISCONTINUED PRODUCT

Super Dynamic HD Vandal Resistant Dome Network Camera

Successor model : WV-SFR310A

• 720p HD images up to 60 fps*1
• Super high resolution at HD/1,280 x 720 created by high sensitivity MOS Sensor.
• Enhanced Super Dynamic*1 and ABS (Adaptive Black Stretch) technologies deliver 133 dB wider dynamic range compared to conventional cameras.
• Multi process NR & 3D-DNR ensures noise reduction in various conditions.
• High sensitivity with Day & Night (Electrical) function: 0.01 lx (Color), 0.008 lx (B/W) at F1.6
• New camera attachment bracket allows an easy camera installation toward all four directions.
• Face Super Dynamic technology ensures clear face image.
• Newly developed dome cover provides clearer images above the horizontal. Thereby, it expands the tilting range of the lens.
• Face detection function detects the position of human face and the information is sent by XML or video stream. (Optional)
• Can be added new intelligent extension software (Optional) in addition to built-in VMD (Video Motion Detection), alarm function.
• Fog compensation function equipped as standard.
• Super Chroma Compensation function realizes a better color reproducibility even in low illumination.
• Supports SSL, DDNS (viewnetcam, RFC2136)
• Vandal resistant mechanism for high reliability
*1 Super Dynamic function is automatically set off on 60fps mode

Camera

COMPONENT	SPECIFICATION
Image Sensor	Approx. 1/3 type MOS image sensor
Effective Pixels	Approx. 1.3 mega pixels
Scanning Mode	Progressive scan
Scanning Area	4.864 mm (H) x 3.891 mm (V) {3/16 inches(H) x 5/32 inches(V)}
Minimum Illumination	Color: less than 0.01 lx, BW: 0.008 lx (F1.6, Maximum shutter : Max. : Off (1/30s), Gain : On(High)) Color: less than 0.0007 lx, BW: 0.0005 lx (F1.6, Maximum shutter : Max. 16/30s, Gain : On(High))
White Balance	AWC (2,000 ~ 10,000 K), ATW1 (2,700 ~ 6,000 K), ATW2 (2,000 ~ 6,000 K)
Light Control Mode	Outdoor scene : Automatic integration of ALC and ELC Indoor scene [50 Hz] : Automatic integration of ALC and ELC with flickerless Indoor scene [60 Hz] : Automatic integration of ALC and ELC with flickerless
Shutter Speed	1.3 mega pixel [16:9](60 fps mode)] OFF(1/60), 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000,1/10000 Other than 1.3 mega pixel [16:9](60 fps mode)] OFF(1/30), 3/100, 3/120, 2/100, 2/120, 1/100, 1/120, 1/250,1/500, 1/1000, 1/2000, 1/4000, 1/10000
Super Dynamic	On(High) / On(Normal) / Off
Face Super Dynamic	ON / OFF (Only at Super Dynamic : ON)
Adaptive Black Stretch	ON / OFF (Only when Super Dynamic OFF )
Fog Compensation	ON / OFF (Only when Super Dynamic/ Adaptive black stretch: Off)
AGC	ON (LOW, MID, HIGH) / OFF
Electronic Sensitivity Up	max. 1/1000 s, max. 1/500 s, max. 1/250 s, max. 1/100 s, max. 1/60 s, max. 1/30 s, max. 2/30 s, max. 4/30 s, max. 6/30 s, max. 10/30 s, max. 16/30 s
Day/Night	Electrical Mode: OFF / AUTO
Dynamic Range	133 dB typ. (Super Dynamic : ON, Light Control Mode : indoor)
Digital Noise Reduction	High / Low
Video Motion Detection	4 areas, Sensitivity : 15 steps, Detection size : 10 steps
Privacy Zone	Up to 8 zones
VIQS	Up to 8 zones
Camera Title (OSD)	Up to 20 characters (alphanumeric characters, marks)
Electric Zoom	TELE / WIDE , Auto Coarse adjustment of Focus
Focus Adjustment	Focus Assist
Lens Distortion Compensation	256 steps

Lens

COMPONENT	SPECIFICATION
Vari Focal Length	2.8 ~ 10mm {1/8 inches–13/32 inches}
Angular Field of View	[16 : 9 mode] Horizontal : 27.7°(TELE) – 99.3° (WIDE) Vertical : 15.7° (TELE) – 54.2° (WIDE) [4 : 3 mode] Horizontal : 27.7°(TELE) – 99.3° (WIDE) Vertical : 20.8°(TELE) – 73.1° (WIDE)
Maximum Aperture Ratio	1 : 1.6 (WIDE) ~ 1 : 4.0 (TELE)
Focusing Range	0.3 m ~ ∞ Horizontal: ±180°, Vertical: ±85°,Image tilt adjustment range: -225° (Left) to +120° (Right)

Adjusting Angle

COMPONENT	SPECIFICATION
Adjusting Angle	Horizontal: ±180°, Vertical: ±85°,Image tilt adjustment range: -225° (Left) to +120° (Right)

Browser GUI

COMPONENT	SPECIFICATION
Cropping	H.264(1) / H.264(2) / H.264(3) / H.264(4) / H.264(all) / JPEG(1) / JPEG(2) / JPEG(3) Up to 4 image capture areas can be specified
Camera Control	Brightness, AUX ON / OFF
Display Mode	Spot, Quad : Image from 16 cameras can be displayed in 4 different Quad screens or 16 split screen (JPEG only). 20 characters camera title available.
Digital Zoom	1x, 2x, 4x controlled by browser GUI
Camera Title	Up to 20 alphanumeric characters
Clock Display	Time : 12H/24H, Date : 5 formats on the browser, Summer time (Manual)
Alarm Control	Reset
One Shot Capture	A still picture will be displayed on a newly opened window.
Audio	Mic (Line) Input : ON / OFF Volume adjustment : Low / Middle / High
SD Memory Data Download	Still or motion Images recorded in the SDXC/SDHC/SD memory card can be downloaded.
GUI/Setup Menu Language	English, Italian, French, German, Spanish, Portuguese, Russian, Chinese, Japanese
System Log	Up to 100 (Internal) Up to 4,000 (SDXC/SDHC/SD memory when the recording format is set to JPEG.) error logs
Supported OS	Microsoft® Windows® 8.1, Microsoft® Windows®8, Microsoft® Windows® 7, Microsoft® Windows Vista®
Supported Browser	Windows® Internet Explorer® 11.0 (32 bit), Windows® Internet Explorer® 10.0 (32 bit), Windows® Internet Explorer® 9.0 (32 bit),Windows® Internet Explorer® 8.0 (32 bit), Windows®Internet Explorer® 7.0 (32 bit)

Network

COMPONENT	SPECIFICATION
Network IF	10Base-T / 100Base-TX, RJ-45 connector
Image Resolution	Image Capture Mode: 1.3 mega pixel [16:9] (30/60fps) 1,280 x 720 / 640 x 360 / 320 x 180 / 160 x 90 Image Capture Mode: 1.3 mega pixel [4:3] (30fps) 1,280 x 960 / 800 x 600 / 640 x 480 / 400 x 300 / 320 x 240 / 160 x 120
H.264	[Transmission Mode] Constant bitrate / Framerate priority / Best effort / Advanced VBR [Frame Rate] 1 / 3 / 5 / 7.5 / 10 / 12 / 15 / 20 / 30 / 60 fps [Bit Rate/Client] 64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 1,536 / 2,048 / 3,072 / 4,096 / 6,144 / 8,192 / 10,240 / 12,288 / 14,336 / 16,384 / 20,480 / 24,576 kbps [Image Quality] LOW / NORMAL / FINE [Refresh interval] 0.2 / 0.25 / 0.33 / 0.5 / 1 / 2 / 3 / 4 / 5s [Transmission Type] UNICAST / MULTICAST
JPEG	[Image Quality] 10 steps [Refresh interval] 0.1 fps - 30 fps (JPEG frame rate will be restricted when displaying both JPEG and H.264 images.) [Transmission Type] PULL / PUSH
Audio Compression	G.726 (ADPCM) 32 kbps / 16 kbps, G.711 64 kbps / AAC-LC
Audio Mode	OFF / Mic (Line) input / Audio output / Interactive (Half duplex) / Interactive (Full duplex)
Authentication for Audio	Level 1 only / Level 2 higher / All users
Total Bit Rate	64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 2,048 / 4,096 / 8,192 kbps / Unlimited
Supported Protocol	IPv6 : TCP/IP, UDP/IP, HTTP, HTTPS, FTP, SMTP, DNS, NTP, SNMP, DHCPv6, RTP, MLD, ICMP, ARP IPv4 : TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP, FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP, UPnP, IGMP, ICMP, ARP
FTP Client	Alarm image transmission, FTP periodic transmission (When the FTP transmission is failed, backup on an optional SDXC/SDHC/SD memory card is available.)
No. of Simultaneous Users	Up to 14 users (Depends on network conditions)
SDXC/SDHC/SD Memory Card (Option)	# Manufactured by Panasonic (SD speed class 4 or higher) # Use the SD memory card that complies with UHS-1 (Ultra High Speed-1) in the case of SD Speed Class 10. H.264 recording : Manual REC / Alarm REC (Pre/Post) / Schedule REC/ Backup upon network failure Compatible (JPEG only) JPEG recording : Manual REC / Alarm REC (Pre/Post) / Backup upon network failure Compatible SD (SDHC/SDXC) card: Panasonic 2 GB, 4 GB, 8 GB, 16 GB, 32 GB, 64GB** model SDHC card, * SDXC card (except miniSD card and microSD card)
Cellular Phone Compatibility	JPEG image, AUX control (by access level)
Mobile Terminal Compatibility	iPad, iPhone, iPod touch (iOS 4.2.1 or later), Android™ Terminal

Alarm

COMPONENT	SPECIFICATION
Alarm Source	3 terminals input, VMD, Command alarm, Audio detection alarm
Alarm Actions	SDXC/SDHC/SD memory recording, E-mail notification, HTTP alarm notification Indication on browser, FTP image transfer, Panasonic protocol output
Alarm Log	With SDXC/SDHC/SD memory card : Up to 50,000 logs for each SD memory card
Schedule	Alarm / VMD / Access permission / H.264 recording / Scene file

Input/Output

COMPONENT	SPECIFICATION
Monitor Output (for Adjustment)	VBS : 1.0 V [p-p]/75Ω, NTSC / PAL composite, ø3.5mm mini jack MONITOR OUT conversion plug included
External I/O Terminals	ALARM IN 1, ALARM IN 2/ALARM OUT, ALARM IN 3/AUX OUT

General

COMPONENT	SPECIFICATION
Safety	UL (UL60950-1), C-UL (CAN/CSA C22.2 No.60950-1), CE, IEC60950-1
EMS	FCC (Part15 ClassA), ICES003 ClassA, EN55022 ClassB, EN55024
Power Source and Power Consumption	DC power supply: 12 V DC/280 mA/Approx. 3.4 W PoE Device: 48 V DC/100 mA/Approx. 4.8 W* (Class 2 device) * ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY.
Ambient Operating Temperature	-10°C ~ +50°C (14 °F ~ 122 °F)
Ambient Operating Humidity	20 ~ 90 % (no condensation)
Shock Resistance	Compliant with 20J IEC60068-2-75/ IEC 62262 IK10
Dimensions	ø129.5 mm x 102.5 mm (H) {ø5-3/32 inches x 4-1/32 inches (H)} Dome radius 41.5 mm {1-5/8 inches}
Mass (Approx.)	0.66kg {1.45 lbs}
Finish	Main body : Aluminum die cast, sail white / Dome section: Clear polycarbonate resin

Caractéristiques

Data Sheet
A&E Spec Sheet

Manuals

Installation Guide
User Manual/Operating Instruction

Firmware/Software

Firmware
Release Note

Image/CAD/BIM

Image Data
BIM Data

Other

Technical Document

Caractéristiques

Data Sheet

WV-SFR311, SFR310 Spec Sheet (Global)

No.2A-120, A4 Size

Indoor Dome Network camera

Camera

Lens

Adjusting Angle

Browser GUI

Network

Alarm

Input/Output

General

Caractéristiques

Data Sheet

A&E Spec Sheet

Manuals

Installation Guide

User Manual/Operating Instruction

Firmware/Software

Firmware

In case of firmware updating from 1.xx to 2.xx, you have to upgrade version 9.99 once, then upgrade 2.xx. Also for upgarding from 2.xx to 4.10 (or earlier), you have to upgrade version 4.00 once, then upgrade 4.10 (or later).

In case of firmware updating from 1.xx to 2.xx, you have to upgrade version 9.99 once, then upgrade 2.xx. Also for upgarding from 2.xx to 4.10 (or earlier), you have to upgrade version 4.00 once, then upgrade 4.10 (or later).

Release Note

Image/CAD/BIM

Image Data

BIM Data

Other

Technical Document

Close