1. Home
  2. Learning and Support
  3. Knowledge Base
  4. Technical Information
  5. Extension software message IDs for TCP alarm

Extension software message IDs for TCP alarm

March 2023

This article provides the required settings on recorders and WV-ASM300 to receive TCP alarm from extension software, including the message IDs of each extension software.

1. Applicable extension software

Extension software that supports TCP alarm (Listed in 3. Alarm names and message IDs)

 

2. Required setting on recorders and WV-ASM300

2-1. Recorders

Set Name and Message ID on [REC & event]-> [Advanced setup]-> [Extension software alarm].
Refer to 3. Alarm names and message IDs for the name and ID of each extension software.

  • WJ-NX400, NX300, NX200 and NX100 - Up to 8 message IDs can be set
  • WJ-NU301, NU300, NU201 and NU101 - Up to 16 message IDs can be set

 

2-2. WV-ASM300

Set Name and Message ID on [Setting]-> [AI camera]-> [Alarm name setting]. Up to 16 IDs can be set.
Refer to 3. Alarm names and message IDs for the name and ID of each extension software.

 

 

3. Alarm names and message IDs

Enter the following Message IDs for each extension software on the setting window of a recorder / ASM300.

Extension software Alarm name Message IDs
(Decimal / Hexadecimal)
AI-VMD Intruder 50 / 32
Loitering 51 / 33
Direction  52 / 34
Cross line 56 / 38
AI Non-mask Detection No Mask 69 / 45
AI Occupancy Detection Occupancy Area1 98 / 62
Occupancy Area2 99 / 63
Occupancy Area3 100 / 64
Occupancy Area4 101 / 65
AI-VMD/AI People Counting for 360-degree fisheye camera Intruder 50 / 32
Loitering 51 / 33
Cross line 56 / 38
Occupancy Area1 98 / 62
Occupancy Area2 99 / 63
Occupancy Area3 100 / 64
Occupancy Area4 101 / 65
Occupancy Area5 102 / 66
Occupancy Area6 103 / 67
Occupancy Area7 104 / 68
Occupancy Area8 105 / 69
AI Scene Change Detection Scene change  59 / 3B
SD Memory card error 60 / 3C
AI Sound Classification
*Camera standard feature
Gunshot 70 / 46
Glass break 71 / 47
Vehicle horn 72 / 48
Yell 73 / 49