Repainting Instruction

August 2024:
Added new models written in red

1. Attention

Precautions For All Models

Follow the instructions below for repainting products.

  • Apply a primer before repainting to improve paint adhesion.
  • Use spray paint for repainting.
  • As cameras contain precision parts, do not use baked enamel finishes or dip coatings for repainting.
  • Do not disassemble the product or hang the product grabbing the cable when repainting, as they may result in device failure, breakage of the cable, etc.
  • Air dry the product after repainting.  Do not apply heat using an equipment such as a dryer as it may result in the failure of the precision parts in the product.  
  • Mask the blue highlighted areas illustrated below before repainting. 
  • When repainting a model with ClearSight coating, the dome cover must be masked with its original protective sheet left attached to protect the coating.

Click here for Product Warranty After Repainting Purchased i-PRO Products

2. Repainting Instructions

Bullet cameras / Dome cameras / Compact dome cameras / 360-degree fisheye cameras / PTZ cameras /
Multi-directional cameras

Supported Models and Instructions

Bullet cameras

WV-S1500,S15000 Series - WV-S1536L, S1536L-B, S1536LN, S1536LN-B, S1536LTN, S15500-F3L, S15500-F6L, S15500-V3L, S15500-V3LN, S15500-V3LN1, S15600-V2L, S15600-V2LN, S15700-V2L, S15700-V2LN, S1536LT, S1536LNS, S15700-V2LK, S15500-V3LK, S1536LA, S1536LNA, S1536LNSA, S1536LTA, S1536LTNA, S1536LA-B, S1536LNA-B, X15700-V2LN, X15700-V2L, X15600-V2LN, X15600-V2L, X15300-V3LN, X15300-V3L, X15500-V3L, X15500-V3LN

See instructions

 

Precautions

  • Attach the accessories to the camera before repainting.
  • Since the outer material is aluminum die casting and plastic, use paints compatible with aluminum die casting and plastic.
  • Mask the clear cover, inner part of sunshade, label, knurled part, ventilation opening, and bottom surface before repainting.

 

 

WV-U15x2 Series -WV-U1542LA, U1532LA

See instructions

 

Precautions

  • Attach the accessories to the camera before repainting.
  • Since the outer material is aluminum die casting and plastic, use paints compatible with aluminum die casting and plastic.
  • Mask the clear cover, inner part of sunshade, label, knurled part, ventilation opening, and bottom surface before repainting.

 

 

Dome cameras

WV-S2100 Series - WV-S2136, S2136-B, S2136G, S2136G-B, S2136L, S2136L-B, S2136LG, S2136LG-B, S2136A, S2136LA, S2136LGA, S2136A-B, S2136GA, S2136GA-B, S2136LA-B, S2136LGA-B

See instructions

 

Precautions

  • Since the outer material is plastic, use paint compatible with plastic.
  • Mask the dome cover, MIC hole, and the bottom surface before repainting.
  • Do not paint the bottom surface because it has a nameplate on it.

 

 

WV-U21x2,U21300 Series - WV-U21300-V2L, U2132LA, U2142LA

See instructions

 

Precautions

  • Since the outer material is plastic, use paint compatible with plastic.
  • Mask the dome cover, MIC hole (U21300), and the bottom surface before repainting.
  • Do not paint the bottom surface because it has a nameplate on it.

 

 

WV-U21x0 Series - WV-U2130LA, U2140LA

See instructions

 

Precautions

  • Since the outer material is aluminum die casting and plastic, use paints compatible with aluminum die casting and plastic.
  • Mask the clear cover and bottom surface before repainting.

 

 

WV-S2200,S22000 Series - WV-S2236L, S22500-V3L, S22500-V3LG, S22500-V3L1, S22600-V2L, S22600-V2LG, S22700-V2L, S22700-V2LG, S22700-V2L1, S22500-F3L, S22500-F6L, S2236L-B, S2236LG, S2236LG-B, S2236LA, S2236LA-B, S2236LGA, S2236LGA-B, X22700-V2, X22600-V2L, X22300-V3L, X22500-V3L 

See instructions

Precautions

  • Since the outer material is plastic, use paint compatible with plastic.
  • Mask the dome cover and the bottom surface before repainting.
  • Do not paint the bottom surface because it has a nameplate on it.

 

 

WV-S2500,S25000 Series - WV-S2536L, S2536LN, S2536LTN, S25500-V3L, S25500-V3LN, S25500-V3LG, S25500-V3LN1, S25600-V2L, S25600-V2LN, S25600-V2LG, S25700-V2L, S25700-V2LN, S25700-V2LG, S25700-V2LN1, S25500-F3L, S25500-F6L, S2536LG, S2536LGN, S2536LT, S2536LA, S2536LNA, S2536LTA, S2536LTNA, S2536LGA, S2536LGNA, X25700-V2LN, X25600-V2LN, X25300-V3LN, X25500-V3LN

See instructions

Precautions

  • Since the outer material is aluminum die casting, use paint compatible with aluminum die casting.
  • Mask the dome cover and the bottom surface before repainting.
  • Do not paint the bottom surface because it has a nameplate on it.

 

 

WV-U25x2 Series - WV-U2532LA, U2542LA

See instructions

 

Precautions

  • Since the outer material is aluminum die casting, use paints compatible with aluminum die casting.
  • Mask the clear cover and bottom surface before repainting.

 

 

WV-U25x0 Series - WV-U2530LA, U2540LA

See instructions

 

Precautions

  • Since the outer material is aluminum die casting and plastic, use paints compatible with aluminum die casting and plastic.
  • Mask the clear cover and bottom surface before repainting.

 

 

Compact dome cameras

WV-S3100 Series - WV-S3111L, S3131L, U31401-F2L, U31401-F2LG, U31301-F2L, U31301-F2LG

See instructions

Precautions

  • Since the outer material is plastic, use paint compatible with plastic.
  • Mask the dome cover, MIC holes, and the bottom surface before repainting.
  • Do not paint the bottom surface because it has a nameplate on it.

 

 

WV-S32000 Series - WV-S32402-F2L, S32302-F2L, S32402-F2LG, S32302-F2LG, S32402-F2L1, S32302-F2L1

See instructions

Precautions

  • Since the outer material is aluminum die cast, use paint compatible with aluminum die cast.
  • Mask the dome cover, MIC holes, and the bottom surface before repainting.
  • Do not paint the bottom surface because it has a nameplate on it.

 

 

WV-S3500 Series - WV-S3511L, S3512LM, S3531L, S3532LM, U35401-F2L, U35401-F2LG, U35301-F2L, U35301-F2LG

See instructions

Precautions

  • Since the outer material is aluminum die casting, use paint compatible with aluminum die casting.
  • Mask the dome cover, MIC holes, bottom surface, LAN cable before repainting.
  • Do not paint the bottom surface because it has a nameplate on it.

 

 

WV-S35000,X35000 Series - WV-S35302-F2L, S35302-F2LG, S35302-F2L1, X35302-F2L, X35302-F2LM, X35402-F2LM, X35402-F2L, S35402-F2L, S35402-F2LG, S35402-F2L1

See instructions

Precautions

  • Since the outer material is aluminum die casting, use paint compatible with aluminum die casting.
  • Mask the dome cover, MIC holes, and bottom surface before repainting.

 

 

360-degree fisheye cameras

WV-S4100 eries - WV-S4176, S4156, S4156A, S4176A

See instructions

Precautions

  • Since the outer material is plastic, use paint compatible with plastic.
  • Mask MIC holes, and the bottom surface before repainting.
  • Do not paint the bottom surface because it has a nameplate on it.

 

 

WV-S4500 Series - WV-S4556L, S4556LM, S4576L, S4576LM, S4556LA, S4556LMA, S4576LA, S4576LMA

See instructions

Precautions

  • Since the outer material is aluminum die casting, use paint compatible with aluminum die casting.
  • Mask the dome cover, IR-LED cover, bottom surface, LAN cable and multi-cable before repainting.
  • Do not paint the bottom surface because it has a nameplate on it.

 

 

PTZ cameras

WV-S6500,X6500,S65340 Series - WV-S6530N, X6511N, X6531N, X6531NS, S6530NS, S65340-Z2G, S65340-Z2K, S65340-Z2N, S65340-Z4G, S65340-Z4K, S65340-Z4N, S65340-Z2, S65340-Z2N1, S65340-Z4, S65340-Z4N1

See instructions

Precautions

  • Since the outer material is plastic, use paint compatible with plastic.
  • Mask the dome cover and bottom surface before repainting.
  • Paint the accessories as well. (Applicable models: WV-X6531N, X6531NS ,X6511N, S6530N, S6530NS)
  • Do not paint the nameplate inside the main sunshield rear cover.

 

 

WV-S65301,S65302,U65301,U65302 Series - WV-U65301-Z1, U65301-Z1G, U65302-Z2, U65302-Z2G, S65301-Z1, S65301-Z1G, S65302-Z2, S65302-Z2G, S65301-Z1-1, S65301-Z1S, S65302-Z2-1, S65501-Z1, S65501-Z1G

See instructions

Precautions

  • Since the outer material is plastic, use paint compatible with plastic.
  • Paint the accessories as well in case of using it.

 

 

WV-S65300,U65300 Series - WV-U65300-ZY, U65300-ZYG, S65300-ZY, S65300-ZYG

See instructions

Precautions

  • Since the outer material is aluminum die casting, use paint compatible with aluminum die casting.
  • Mask the dome cover and the bottom surface before repainting.
  • Do not paint the bottom surface because it has a nameplate on it.

 

 

WV-X66000,S66000 Series - WV-S66700-Z3L, S66600-Z3L, S66300-Z4L, S66300-Z3L, S66700-Z3, S66600-Z3, S66300-Z4, S66300-Z3, X66700-Z3LS, X66600-Z3LS, X66300-Z4LS, X66300-Z3LS, X66700-Z3S, X66600-Z3S, X66300-Z4S, X66300-Z3S, S66700-Z3LN , S66700-Z3N , S66600-Z3LN , S66600-Z3N , S66300-Z4LN , S66300-Z4N , S66300-Z3LN , S66300-Z3N , X66700-Z3LK , X66700-Z3K , X66600-Z3LK , X66600-Z3K , X66300-Z4LK , X66300-Z4K , X66300-Z3LK , X66300-Z3K

See instructions

Precautions

  • Since the outer material is aluminum die casting and plastic, use paint compatible with aluminum die casting and plastic.
  • Mask the dome cover, clear cover, the bottom surface, and sliding portion before repainting.
  • Do not paint the bottom surface because it has a nameplate on it.

 

 

 

Multi-directional cameras

WV-S8500 Series - WV-S8543, S8543G, S8543L, S8543LG, S8544, S8544G, S8544L, S8544LG, S8563L, S8563LG, S8564L, S8564LG, S8573L, S8573LG, S8574L, S8574LG

See instructions

Precautions

  • Since the outer material is aluminum die casting and plastic, use paints compatible with aluminum die casting and plastic.
  • Mask the dome cover, IR-LED cover, and bottom surface before repainting.
  • Paint the plastic accessory as well.
  • Do not paint the bottom surface because it has a nameplate on it.

 

 

 

WV-S85xx2, U85xx2 Series - WV-S85702-F3L, S85402-V2L, S85702-F3L1, S85402-V2L1, U85402-V2L, U85402-V2L1

See instructions

Precautions

  • Since the outer material is aluminum die casting, use paints compatible with aluminum die casting.
  • Mask the dome cover and bottom surface before repainting.
  • Do not paint the bottom surface because it has a nameplate on it.

 

 

 

 

WV-X86000 Series - WV-X86530-Z2, X86531-Z2, X86530-Z2-1, X86531-Z2-1

See instructions

Precautions

  • Since the outer material is aluminum die casting and plastic, use paints compatible with aluminum die casting and plastic.
  • Mask the dome cover, clear cover, and bottom surface before repainting.
  • Do not paint the bottom surface because it has a nameplate on it.

 

 

 

 

Video Instructions

Repainting Instruction for purchased i-PRO cameras - YouTube