1. Home
  2. Surveillance
  3. Partners
  4. Video Management System Partners
  5. Genetec
  6. Multi-directional + PTZ camera Linkage Functions for Genetec

 Multi-directional + PTZ camera Linkage

Last update: June, 2023

Multi-directional+PTZ camera configuration on Genetec Security Center


This function enables automatic movement of the PTZ camera by operating the mouse on the multi-directional camera screen.
By clicking on the multi-directional part screen, the pan/tilt of the PTZ camera screen moves to the corresponding position.
By dragging on the multi-directional part screen, the specified range on the PTZ camera screen will be zoomed.

Multi-directional camera screen                     PTZ camera screen

<Camera settings>

1. Open [Setup] - [Alarm] - [Notification].

2. Select the [HTTP alarm Notification].

3. Ensure that the checkbox for alarm with Address 5 is checked.
 Address 5 is exclusively set for PTZ linked operation.

<Genetec settings>

1. Select [Video] - [Camera-01-04] and open the [Hardware] tab in Config Tool.

2. Set Enhanced PTZ to "ON".

<Operation (Security Desk)>

 

1. The following operations can be performed on the [Monitoring screen] of [Security Desk].
   By clicking on the multi-directional part scren, the pan/tilt of the PTZ camera screen moves to the corresponding position.
   By dragging on the multi-directional part screen, the specified range on the PTZ camera screen will be zoomed.
    A. Pan/Tilt Operation
 B. ZOOM Operation

A. Pan/Tilt Operation

 A-1. Click on the multi-directional part screen.

 

 A-2. The PTZ camera's pan/tilt will move to the corresponding position.


B. ZOOM Operation

 B-1. Drag on the multi-directional part screen.

 

 B-2. The PTZ camera will zoom accordingly.

 

Genetec Security Center 5.11 / Driver Pack 11.3