When connecting a PoE injector to a network camera, is there anything I should take care?
- Network Cameras
- Specification
A PoE-compatible camera must be connected to a PoE injector using a Category 5e or higher cable. Ensure the PoE injector complies with IEEE 802.3af/at/bt standards and verify compatibility before use.
For PoE injectors, there are models compatible with IEEE 802.3af/at/bt standards, so please use one that matches the standard of the camera.
Please note that some power supplies may be labeled as IEEE802.3af/at/bt compliant, but may not emit a valid detection signal, so please check before use.
Please check the following website for verified products.
Cameras and PoE injectors compatibility | i-PRO Products
Note:
The above site is for 60W and 90W compatible products, but they can also be used with IEEE802.3at and IEEE802.3af.
Article number：us-fr124576
Last updated：June 18, 2025
Was this article helpful?
Thank you for your feedback!