1. Open the camera settings screen and go to [Basic] > [SD memory card].
2. Select [Use] for [SD memory card].
3. Select [On] for [Overwrite].
4. Select the target stream for [Overwrite].
5. Select [Schedule] for [Save trigger], then click [Set].

 

6. Go to [Setup] > [Schedule].
7. Select [Recording to SD] for [Schedule mode] under the [Schedule 1 (White)].
8. Select the target day and time for [Time range], then click [Set].

 

9. Confirm that the [REC] icon is red in [Live] view. 

 

Note:
The camera [Alarm] > [Notification] settings are automatically configured when the camera is registered with Security Center.
If alarm notifications are not received, ensure that the [Destination port] and [Destination server address] are configured correctly.

 

2. Genetec Settings

2.1 Event Notification Settings

Configure the settings so that alarms can be received in Security Desk.

1. Open Security Desk, go to [Options] > [Events] > [Event options].
2. Check [Edge storage medium failure], then click [Save].

 

3. Go to [Security Desk] > [Tasks] > [Monitoring].
4. Click [Monitoring] in the bottom-left menu, then click [+] to add the target camera.

 

2.2 Event-to-action Settings (Optional)

When SD Card Alarm event occurs, you can configure an action to be executed.
As an example, this section describes how to display alarm notifications on the [Alarm monitoring] tab.

2.2.1 Alarm Settings

1. Open [Config Tool].
2. Go to [Config Tool] > [Alarms].
3. Click [Add an entity], and select [Alarm].

 

4. Enter "SD card Alarm" in [Name], and then click [Apply].

 

5. Go to the [Properties] tab.
6. Click [+] in Recipients, and select the target users. Click [Add].
7. Click [Apply].

 

2.2.2 Action Settings

1. In Security Center, go to [Config Tool] > [Automation] > [Actions].
2. Click [+]. 

 

3. Set the parameters as follows.

• When: Select [Edge storage medium failure].
• From: Select the target camera.
• Action: Select [Trigger an alarm].
• Alarm: Select the alarm you created.

 

4. Click [Save].

 

3. How It Works

3.1 Verifying Event Reception on the Monitoring Tab

1. Open Security Desk, go to the [Monitoring] tab.
2. When an SD Card Alarm occurs, an [Edge storage medium failure] event appears in the [Monitoring] tab.

 

3.2 Verifying Alarm Reception on the Alarm Monitoring Tab

1. Open Security Desk, go to the [Alarm monitoring] tab.
2. When an SD Card Alarm occurs, an [SD card Alarm] alarm appears in the [Alarm monitoring] tab.

 

Genetec Security Center 5.13.3.1 / Driver Pack 13.5