WV-X67300-Z4L3 series

Update on June 10, 2025
i-PRO Co., Ltd.

Download Firmware: WV-X67300-Z4L3 series firmware

Applicable model list

WV-X67300-Z4-3, WV-X67300-Z4L3, WV-X67310-Z4-1, WV-X67310-Z4-3, WV-X67310-Z4L1, WV-X67310-Z4L3, WV-X67301-Z4L3 , WV-X67311-Z4L3

Priority Rank Level:
🅰︎: Recommended to apply
🅱: When issue happened
🅲: Maintenance timing

Released Versions:
V2.85 | V2.81 | V2.80 | V2.68

Release date: May 30, 2025

->Updated on June 10: Added an item written in red

Support D2C for Genetec Security Center SaaS.
Added [Detailed setting] to [HTTP alarm notification] settings.[More details(*1)>>]
Added [Mic input] and [Audio output] buttons to the top of the live image page.
Improved ONVIF connection.
Enhanced security for handling incoming CGI commands.
*If you are using the [Image quality setting] - [Batch change to the appropriate setting] for AI-VMD, please upgrade AI-VMD to V3.80 (or later).

See more details of feature improvements *1

Added "Detailed setting" to the settings for [HTTP alarm notification].

HTTP request method
Set the HTTP request method (GET/POST) for HTTP alarm notifications.
Alarm type to be linked
Set the alarm types (Terminal/Command alarm/AI-VMD/etc.) to be linked.
Alarm Area No.
Set the area number of the alarm to be linked.
Alarm test
Execute the alarm test function.
Copy settings to other notifications
Copy all settings to the selected notification destination.

Corrected issues where authentication using EAP-PEAP (IEEE 802.1X) failed depending on the network environment. 🅲
Corrected an issue where SD recording for Remote Monitoring did not start, even when Remote Monitoring function was enabled with [Set recommended values] selected. 🅱
Corrected an issue where the focus occasionally became blurred due to static electricity or other environmental factors. 🅲

Release date: March 27, 2025

Corrected an issue with built-in heater and IR-LED when using PoE++ (60W). 🅲
Occurrence condition: Version 2.80

Release date: January 30, 2025

Corrected the following issues including other minor issue:

Corrected an issue where image streaming to a specific 3rd party media player might stop. 🅲
Improved the digital zoom performance while zooming in. 🅲
Improved the user interface. 🅲
Corrected an issue with the [Preset sequence setting] of the live window on Google Chrome browser. 🅲
Occurrence conditions: Display size on the PC is larger than 100%.
Corrected an issue where the Command alarm pop-up did not appear on the live window when [Alarm test] is executed. 🅲
Occurrence condition: When Command alarm is turned off.
Corrected an issue where HTTPS connection might not be possible after re-installing a CA certificate. 🅲
Corrected an issue where the VMD area window did not open showing a blue screen instead. 🅲
Occurrence condition: After moving to "TCP alarm notification" setting from the VMS area window.
Corrected an issue where the setting window did not open showing a blue screen instead. 🅲
Applies to: VMD area/ SCD area/ Audio detection/ Impact detection/ Casing open detection windows
Occurrence condition: When the web browser is closed while displaying the setting window
Corrected an issue where the pan control might not work after setting pan/tilt range. 🅲
Corrected an issue where PTZ control did not work after the camera was rebooted. 🅲
Occurrence condition: When the camera is connected to Genetec VMS using ONVIF connection.

Release date: February 6, 2025