1.1 Auto Registration 

1. Open [Video Client].
2. Go to [Configuration mode], then click [Find devices].

 

3. The system will start detecting devices automatically.

 

4. Once the devices are detected, select the checkbox on the left and configure the following settings:

• Manufacturer: i-PRO/Panasonic
• Type: i-PRO/Panasonic Smart Driver (H.264/H.265 Generation)
• Username: Camera user ID
• Password: Camera password
• Record On Motion: Check this box if you want to record event-based. You can also activate this later.
• Add with multiconfig: Keep this checked (defaut: on)
• Validate settings before device creation: Keep this checked (default: on)

After entering all the fields, click [Add] to complete the registration.

 

5. The cameras will be added to the camera tree on the right side of the screen.

 

1.2 Manual Registration

1. Go to [Configuration mode], then click [Create camera].

2. Configure the following settings, then click [OK] to register the camera:

• Name: Enter a name
• Manufacturer: i-PRO/Panasonic
• Type: i-PRO/Panasonic Smart Driver (H.264/H.265 Generation)
• Use authorization: Select this option (enabled by default)
• Username: Camera user ID
• Password: Camera password
• Host (IP address or name): Camera IP address
• Port: 80
• DeviceManager: Select the target DeviceManager
• Validate settings before device creation: Keep this checked (default: on)

 

3. The camera will be added to the camera tree on the right side of the screen.

 

HxGN dC3 Video Version 9.0