Update on February 9, 2026
i-PRO Co., Ltd.

Download Firmware: WV-X15700-V2L series firmware

Priority Rank Level:   
 🅰︎: Recommended to apply
 🅱: When issue happened
 🅲: Maintenance timing

Released Versions:
V3.67 | V3.65 | V3.60 | V3.50 | V3.45 | V3.41 | V3.40 | V3.30 or earlier

Version 3.67

Release date: February 9, 2026

Resolved Issues 

• Corrected an issue where extension software could not be installed under specific conditions. 🅲
  Occurrence conditions: When all of the following conditions are met:
  -When using Remote Monitoring.
  -Camera firmware version is V3.65.
• Corrected an issue where extension software could not be configured or upgraded under specific conditions. 🅲
  Occurrence conditions: When all of the following conditions are met:
  -When using Remote Monitoring (for camera direct connection).
  -Camera firmware version is V3.65.

Version 3.65 

Release date: December 22, 2025

New Features / Improvements 

• Improved the [Alarm test] function for HTTP alarm notifications so that users can specify the destination of trap as well as the trap content.
• Support HTTPS and 802.1X certificates with expiration dates beyond the year 2050.
• Improved ONVIF connection.
• Enhanced security.

Resolved Issues 

• Corrected an issue where images were not displayed at equal intervals during H.264 streaming. 🅲
  Occurrence conditions: When streaming with H.264 at a low frame rate.
• Corrected an issue where the image sensor was occasionally reset, causing a short distortion in the image. 🅲
  Occurrence conditions: When the camera experienced a high processing load.
• Corrected an issue where communication with the camera could occasionally fail after a reboot. 🅲
  Occurrence conditions: When the camera performed a self-reboot to recover from an internal error.
• Corrected an issue where 802.1X connection failures occurred. 🅲
  Occurrence conditions: When using 802.1X and the server certificate size exceeds 6KB.
• Corrected an issue where incorrect log messages were displayed. [Previous log: ROM capacity limit/Updated log: Communication error] 🅲
  Occurrence conditions: When extension software installation failed due to network communication issues.
• Corrected an issue where recorded images on the SD memory card could not be played back. 🅲
  Occurrence conditions: When recording to an SD memory card with a short refresh interval and low bitrate settings.
• Corrected an issue with the following CGI command. 🅲
   - /cgi-bin/setdata
   - /cgi-bin/set_h264, set_h264_2
• Corrected an issue where focus could become blurred after camera reboot under specific conditions. 🅲
  Occurrence conditions: When all of the following conditions are met:
   -The temperature difference between the time focus was set and the reboot exceeds 35°C
   -The camera is operating in black and white images mode during reboot
   -The frame rate is set to 15 fps during reboot
• Corrected an issue where the camera occasionally restarted after long-term continuous operation. 🅲
  Occurrence conditions:When all of the following conditions are met:
   -When AI-VMD was uninstalled.
   -Camera firmware version is V3.50 or V3.60
• Corrected an issue where IR LED brightness occasionally became unstable. 🅲
  Occurrence conditions: When shooting a nearby subject in an IR-LED environment.

Version 3.60 

Release date: September 30, 2025

New Features / Improvements 

• Improved a function to notify an alarm if the SD memory card is removed during operation.
• Support extension software installation/upgrade via Remote Monitoring.
• Support AI On-site Learning settings via Remote Monitoring.
• Corrected the notification source information of the alarms in the app applied to cameras 2 to 4 to be the information for each camera, when working with AI Processing Relay.
• Enhanced security.

Resolved Issues 

• Corrected an issue where detection frame information of AI Occupancy Detection was not included in the recorded video on an SD memory card. 🅲
  Occurrence conditions: When [Audio recording] is set to "On" on the [SD memory card] setting.
• Corrected an issue where alarms from Cam1 were not transmitted to the Genetec Security Center. 🅲
  Occurrence conditions: When using AI Processing Relay

Version 3.50 

Release date: September 30, 2025

New Features / Improvements 

• OSS update.
• Enhanced security.

Resolved Issues 

• Corrected an issue where operations in web browser is impossible because the authentication windows displays repeatedly. 🅲
  Occurrence conditions(example) : When a user with the "Camera Control" of access level operates the "Brightness".

Version 3.45 

Release date: May 30, 2025

New Features / Improvements 

• Added [Detailed setting] to [HTTP alarm notification] settings.[More details(*1)>>]
• Added [Mic input] and [Audio output] buttons to the top of the live image page.
• Improved ONVIF connection.
• Enhanced security for handling incoming CGI commands.
  For details, refer to Security Advisories | i-PRO Products page.
  *If you are using the [Image quality setting] - [Batch change to the appropriate setting] for AI-VMD, please upgrade AI-VMD to V3.80 (or later).

 

See more details of feature improvements *1

 

 *1 Detailed setting for HTTP alarm notification 

Added "Detailed setting" to the settings for [HTTP alarm notification].

HTTP request method Set the HTTP request method (GET/POST) for HTTP alarm notifications.   Alarm type to be linked Set the alarm types (Terminal/Command alarm/AI-VMD/etc.) to be linked.   Alarm Area No. Set the area number of the alarm to be linked.   Alarm test Execute the alarm test function.   Copy settings to other notifications Copy all settings to the selected notification destination.

Resolved Issues 

• Corrected issues where authentication using EAP-PEAP (IEEE 802.1X) failed depending on the network environment. 🅲
• Corrected an issue where SD recording for Remote Monitoring did not start, even when Remote Monitoring function was enabled with [Set recommended values] selected. 🅱
• Corrected an issue where the focus occasionally became blurred due to static electricity or other environmental factors. 🅲

Version 3.41 

Release date: March 27, 2025

Resolved Issues 

• Corrected an issue where a noise might appear on the image, on rare occasion. 🅲
  Occurrence condition:
  - 4K models
  - 30fps is selected for [Image capture mode]

Version 3.40 

Release date: January 30, 2025

New Features / Improvements 

• Support PKCS#12 for HTTPS.
• Added Host name setting to [Network settings].
• Added a link of [Detailed setting] to the screen for tablet terminals.
• Support “+” symbol in [Remote Monitoring registration mail address].
• Increased the maximum RAM capacity for AI apps to 1GB.
• Support 15fps or higher frame rate when using [Stabilizer].
  *5MP/2MP models are supported before V3.40.
• Improved the connectivity to Video Management Software (VMS).
• Improved ONVIF connection.
• Optimize memory usage when using AI-VMD.

Resolved Issues 

Corrected the following issues including other minor issue:

• Corrected an issue where image streaming to a specific 3rd party media player might stop. 🅲
• Improved the stabilizer performance when the [Privacy zone Display type] is set to "Blurring". 🅲
  *5MP models only
• Added an improvement for a 3rd party container application. 🅲
• Improved the user interface. 🅲
• Corrected an issue where the Command alarm pop-up did not appear on the live window when [Alarm test] is executed. 🅲
  Occurrence condition: When Command alarm is turned off.
• Corrected an issue where HTTPS connection might not be possible after re-installing a CA certificate. 🅲
• Corrected an issue where the setting window did not open showing a blue screen instead. 🅲
  Applies to: VMD area/ SCD area/ Audio detection/ Impact detection/ Casing open detection windows
  Occurrence condition: When the web browser is closed while displaying the setting window