3.Set the camera

3.1Check whether the object is of the proper size.

When using our Extension software, you can check the number of grids to see if it is the right size to recognize object. Refer to <Control No.: C0320> on the following technical information website.
→For more information about the recommended sizes of Extension software

3.2Adjust the image quality

This section explains how to adjust the image quality when installing the camera.

3.2.1Set the light intensity control mode according to the installation location and area.

Use [Light control mode] to set the appropriate amount of light for the installation location and region.

➣

Live image pages configuration panels>Clicking the [Image quality] tabs enables you to set the image quality.

1.

Select [Light control mode]

-

[Flickerless (50 Hz)]/[Flickerless (60 Hz)]: Flickering caused by fluorescent lighting is corrected automatically.You can use 50 Hz/60 Hz depending on the region.

-

[ELC]:The electronic shutter is used to control the light intensity.

・ Refer to the User Manual for more information on Light Control Mode.

3.2.2Set the white Light according to the ambient conditions

Use [White Light] to select a white Light suitable for the installation location or region.

＜WV-X45701-F1L/WV-X45701-F1LM/WV-X45501-F1L/WV-X45501-F1LM＞
（Only for models with white Light）

➣

Clicking [Image] in Live image pages Settings panel > [Detail setting] > [Camera detailed setting] > Advanced menu on the left, or [Image adjust] > [Advanced settings] on [Image/Audio] > [Image/Position] tab. The Adjust Picture Settings window appears.

1.

Click [Execute] in [Check Light].

・You can check how the white Light lights up.

2.

Select [Lighting time].

・Select from [5s], [10s], [30s], [1min], or [5min].

3.

Set [Camera action on alarm]

・For details of the setting related to alarm linkage operation, refer to the following.

→3.2.2.1　 Link to AI-VMD to turn on the white Light

4.

Setting Up [White Light intensity control]

・Set to [On] or [Off].

5.

Set [White Light Peripheral Illumination Correction]

・Set to [On] or [Off].

To adjust the intensity of the white Light, set "White Light Intensity".
For more information about white Light Intensity, see the user manual.
For more information about White Light and Suppress and [White Light peripheral intensity control], see the user　documentation.

3.2.2.1Link to AI-VMD to turn on the white Light

By setting [Camera action on alarm], the white Light lights when the movement of an object is detected in conjunction with AI-VMD.

To use AI-VMD linkage, you need to install AI Motion Detection Application [WV-XAE300WUX].

➣

Clicking [Image] in Live image pages Settings panel > [Detail setting] > [Camera detailed setting] > Advanced menu on the left, or [Image adjust] > [Advanced settings] on [Image/Audio] > [Image/Position] tab. The Adjust Picture Settings window appears.

1.

By clicking White Light action (on alarm) in [Camera action on alarm]

・You can make settings related to alarms.

2.

Turn [On] [AI-VMD].

3.2.3Sets night time black-and-white switching mode

You can switch to color or black-and-white images by using [Day & Night(IR)] when shooting at night.

➣

Live image pages configuration panels>Clicking the [Image quality] tabs enables you to set the image quality.

1.

Select [Day & Night(IR)]

・

Select from [Off], [On], [Auto1(Normal)], [Auto2(IR Light)], and [Auto3(SCC)].

[Off]

This function is used for shooting colored images at night as well.

[On]

The picture is always taken in black and white.

[Auto1(Normal)]

The color image and black-and-white image are automatically switched depending on the brightness (illumination) of the image.

[Auto2(IR Light)]

The color image and black-and-white image are automatically switched depending on the brightness (illumination) of the image. This is set when the near-infrared illumination is used at night.

[Auto3(SCC)]

Set this when you want to maintain a color image even when the light source is dark. The Super Chroma Compensation (SCC) function maintains the color image to low illumination.

(1)

Activate IR Light you want to light up.

(2)

Select Intensity

・Select from [High], [Middle], or [Low].

・IR Light and white Light can be set individually.Refer to the user manual for individual control.

・To adjust the intensity of the white Light, set [White Light Intensity].

・For more information about [White Light Intensity], see the user manual.

3.3Recording setting (SD Memory Card)

3.3.1Install the SD Memory Card

1.

Insert a microSD memory card into the slot

Use the SD Memory Card formatted on this product.

To remove the SD Memory Card, [Basic] the Advanced menu.>On the [SD memory card] tab, select [SD memory card] as [Not use]. Remove the SD Memory Card from this product.

3.3.2Record using SD Memory Card

This section describes the procedures for turning [Save trigger] to [Manual].

➣

Live image pages configuration panels>[Detailed setting]>[Camera detailed setting]> [Basic] of the Advanced menus on the left>When [SD memory card] tab is clicked, the SD Memory Card setup page is displayed.

(1)

Select [Recording format] streams

(2)

Select [Save trigger] and click [Set].

(3)

Click [Live] in the upper left corner and click the camera control panel display button.

・

The camera control panel is displayed.

(4)

Clicking [Start] on [Rec. on SD]

・

Start recording to the SD Memory Card manually.

・

You can stop recording by clicking [Stop]. After stopping, you can resume recording by clicking [Start].

3.3.3Play back images stored on the SD Memory Card

You can play back images stored on the SD Memory Card.

➣

Live image pages cameras control panels>Clicking [Log/Play] displays the log list.

1.

View Live image pages and click the camera contol panel display button.

2.

Press the [Start] on [Log/Play] button

・

The Log List screen is displayed in a separate window.

3.

Press the shooting date and time displayed below [Time & date]

・

The playback page is displayed and the saved image is played.

3.4Hide some of the images

If you set the area to be hidden, you can move the camera's field angle while holding the area to be hidden.

➣

Live image pages configuration panels>[Detailed setting]>[Camera detailed setting]>[Image/Audio] of the Advanced menus on the left>[Privacy zone] in the [Image/Position] tabs>When [Setup] is clicked, the Privacy Zone setting window is displayed.

1.

Specify four vertices on the image and press [Set] button.

・

Privacy zones are set in order from Area 1.

2.

Select [Status] to view privacy zones

・

Set up the privacy zone in [On]/[Off].

3.5Record sound

Audio data can be recorded to SD recording when alarm is detected.

1.

Select whether to record audio data in the SD Memory Card setup page.

・

[On] saves audio data in a movie (MP4 format).

・

[Off]: Audio data is not saved in movies (MP4 format).

3.6Set up events

You can set the alarm to detect the operation of an area or interference to the camera, or the operation when the alarm is detected.

➣

Live image pages configuration panels>[Detailed setting]>[Camera detailed setting]>[Easy Setup] of the Advanced menus on the left>Clicking on the [Event action] tabs displays the configuration pages.

・Refer to the User Manual for instructions on configuring events.

・Refer to the User Manual for instructions on how to configure Internet disclosure.

3.6.1Detect object movements

When an alarm is activated, the camera operates as set. There are patterns for the alarms when the specified area moves and when the camera is blocked.

➣

Live image pages configuration panels>[Detailed setting]>[Camera detailed setting]>[Alarm] of the Advanced menus on the left>Clicking on the [VMD area] tabs displays the configuration pages.

Refer to the user manual for details of all alarms.

3.6.1.1Set the area for detecting the movement of an object

Set the area for detecting the movement of an object using the motion detection function using video images.

1.

Drag through the image to set the area.

・

You can set the areas in order.

2.

Adjust the [Detection area] and [Detection sensitivity] using the slider bar and then press [Set].

3.7Enhance communication security

Setting up HTTPS encrypts camera access and enhances communication security.

・

Refer to the following support videos for the HTTPS setting method (pre-installation).
→Support video

・

For information about how to configure HTTPS (Server Certificate), refer to the following supported videos.
→Support video

3.8Detect data falsification

If you set Falsification Detection, you can detect the falsified data on the SD Memory Card using the dedicated software.
Refer to the following support videos for how to set up tampering detection.
→Support video

3.9Set the Image capture size and frame rates

➣

Live image pages configuration panels>[Stream] tabs>Set in [Image capture mode] of [Common].

・Refer to the User Manual for details on settings and frame rates.

・For more information about Image capture size, see the following.
→About Image capture mode and Image capture size

3.10Set the image stream

3.10.1About Stream Settings

Specify whether to distribute streams, whether to use H.265 or H.264 as the compression method, the resolution, image quality, and how to distribute the data.

➣

Live image pages settings pane>This is done in the [Stream] tab.. H.265 images and H.264 images are streamed in the [Stream] section of the [Stream].

・

For information on image compression methods, see the following:
→3.10.2　About delivery volume control (bit rate)

・

For information on how to deliver, see the following:
→3.10.3　Reducing Data Capacity with Smart Coding

・

For details on each setting method, refer to the user manual.

3.10.2About delivery volume control (bit rate)

There are the following types of delivery modes for stream delivery volume control (bit rate), and they are set according to the case. You can also use smart coding, such as [Auto VIQS], to reduce the volume. For information about controlling the delivery of streams, see the following: For details, refer to the user manual.
→3.10.3　Reducing Data Capacity with Smart Coding

・

Constant Bit Rate :
Delivers H.265 (or H.264) images at the bitrate set in [Max bit rate (per client) *].

・

Variable bit rate :
Delivers H.265 (or H.264) images at the frame rate set in [Frame rate*] while maintaining the image quality level set in [Image quality]. At this time, the bit rate is distributed with a variable value within the maximum bit rate set in [Max bit rate (per client) *]. The recording capacity varies depending on the [Image quality] setting and the object status.

・

Frame rate specification:
Delivers H.265 (or H.264) images at the frame rate set in [Frame rate*].

・

Best effort delivery:
Depending on the bandwidth of your network, you can distribute H.265 (or H.264) images at varying bit rates, up to the maximum bit rate set in [Max bit rate (per client) *].

3.10.3Reducing Data Capacity with Smart Coding

Smart coding is a data-compression technique that reduces the amount of compression to sharpen human faces, increases the amount of compression in the background, or optimizes the amount of compression by object.

➣

Live image pages settings pane>[Detail setting]>[Camera detailed setting]>[Image], or [Image/Audio] in the Advanced menu on the left>Clicking [Image] brings up the Smart Coding Settings window.

This image is an image. It differs from how the screen is actually viewed.

[Auto VIQS]

Maintains high-quality images in the area where objects (heads, people, vehicles, and motorcycles) are captured.For areas other than the object, low or medium image quality is maintained, and the image is delivered to reduce the amount of data.

[Smart P-picture control]

In order to reduce the amount of data, the generation of data (macro block) is reduced for areas other than objects (head, person, vehicle, or two-wheel) that are still visible.

[GOP control]

You can reduce the amount of data.