5Set radar

[Reference]

・Refer to the Security Radar Guide for radar settings.

5.1Set radar detection

You can use [Radar detection] to set the location and target of the radar detection.

➣

Live image pages settings pane>[Detailed setting]>[Advanced settings page] for [Detailed setting]>[Radar]'s [Radar detection] in the Advanced menu on the left>Clicking [To detection settings] under [Detection Settings] in [Radar detection settings] displays the Radar Detection Settings window.

1.

Set the [Detection area].

・

Specify the range to be detected from the radar image in the Radar Detection Setting.

2.

Set the [Detection object].

3.

Set the [Detection mode].

4.

Sets the [PTZ Camera].

・

Selects a linked PTZ that captures the target when detected.

[Notice]

・Refer to the Security Radar Guide for detailed configuration instructions.

5.2Set radar jamming detection

Use [Tamper Detection] to set up detection when the radar is disturbed.

➣

Live image pages settings pane>[Detailed setting]>[Advanced settings page] for [Detailed setting]>[Radar]'s [Tamper Detection] in the Advanced menu on the left>Set [Tamper Detection] to [Enable] for Radar Interrupt Detection.

1.

Sets the [Tamper Detection].

2.

Set the [Detection sensitivity].

3.

Set the [Detection time].

4.

Press [Set] to save the settings.

[Notice]

・Refer to the Security Radar Guide for detailed configuration instructions.

[Notice]

・For the operation at detection, refer to the following.

7.4　Set the event