Add new product |
|
Add new product |
|
Add new product |
|
|
New functions and addendum (Firmware Ver.2.33) |
・ The following was added to the communication protocol FTP/SFTP function of the file transfer function. (→17.2.2 Configuring FTP/SFTP transmission function) ・Add 2fps, 3fps to Image-Update Rate ・Add 1920x1080 to Image capture size for pre-alarm ・Expand image destination server to two locations ・ A 0.5s, 1s, 2s, 3s, 4s was added to the alarm absence detection period. (→15.1 [Alarm] to set alarm operation) ・ The function to change the image quality at the time of sunrise and sunset has been added to the schedule setting. (→18 [Schedule] for scheduling) ・ Added the [Enable/Disable] setting for [SNMP] in the [Advanced] tab of the Network page. (→17.2.7 Set SNMP) ・ You can now edit the camera title by adding and clicking the title edit icon next to the camera title. (→2.3 Viewing images from a PC) ・ You can now select [SD Memory Card File System Format] and [FAT(FAT16/FAT32/exFAT)] and [ext(ext4] to select the file system format of the SD memory card. (→10.2 [SD memory card] for setting SD Memory Cards) |
New functions and addendum (Firmware Ver.2.40) |
・ Add 1280x720 image capture size for Stream (1) and Stream (2) of the Multi-directional sensor camera 4MP model.(→11.3 [Image] for setting up streams) ・ The information in the notes has been changed due to the relaxation of frame rate restrictions during [GOP control].(→11.3 [Image] for setting up streams) ・ The note description has been changed because the tracking performance of the auto track function may lower depending on the [Maximum shutter] setting.(→12.3 Set auto-tracking (Auto-tracking screen)) ・ A note description has been added regarding function settings that are not applied when settings data is restored.(→19.5 [Data] to back up/restore configuration logs) |
Add new product |
|
Add new product |
|
New functions and addendum (Firmware Ver.2.50／[New X Fixed] Ver.3.10) |
・ A SAN entry field has been added to the CSR creation screen.(→17.3 Setting up HTTPS) ・ The initial password for data encryption has been changed to blank.(→16.5 [Data encryption] for setting up data encryption) ・ The names of connection options for HTTP and HTTPS have been changed. [TLS1.2] has been changed so that it can now be enabled or disabled.(→17.2.5 Set up HTTPS) ・ A "Diag." function has been added to HTTP alarm notifications.(→15.12.2 Set the HTTP alarm notification) ・ The [Security] settings screen has been added to the [User mng.] menu. Settings related to security can be configured in this section.(→16.6 [Security] to configure security) ・ "MD5" has been removed from the SNMPv3 [Authentication].(→17.2.7 Set SNMP) ・ "EAP-MD5" has been removed from the [EAP method] for IEEE 802.1X.(→16.4 [IEEE 802.1X] to configure IEEE 802.1X) |
Add new product |
|
New functions and addendum (Firmware Ver.2.60／[New X Fixed] Ver.3.20) |
・ In order to change the font of the live image screen and i-PRO logo design, a description has been added to the announcement.(→2.3.2 About live image pages) |
Add new product |
|
Add new product |
|
Add new product |
|
New functions and addendum (Firmware Ver.2.70／[New X Fixed] Ver.3.30) |
・ Due to the change of icons, the images on the live image screen have been replaced. (→2.1 Initial Setting) (→2.2 Initial setting (Multi-directional/PTZ integrated camera)) (→2.3.2.1 Live image pages of Fixed Cameras) (→2.3.2.2 Live image pages of the PTZ camera) (→2.3.2.3 Live image pages of Multi-directional Cameras) (→2.3.2.4 Live image pages of Multi-directional/PTZ integrated cameras) (→2.3.3 Monitor images from multiple cameras) (→2.7 Display the log list) (→2.8.1 When playing JPEG images stored on the SD Memory Card) (→2.8.2 Play back the image of the stream stored on the SD Memory Card) (→16.5 [Data encryption] for setting up data encryption) ・ The setting window for connecting Remote Monitoring was added to "Remote Monitoring" of "Network".(→17.5 Use Remote Monitoring) |
Add new product |
|
New functions and addendum (Firmware Ver.2.80／[New X Fixed] Ver.3.40) |
・ Notes on multicast have been added to [Note:] in [Camera Control Panel]-[Audio output volume (PC to Camera)] and [Camera Control Panel]-[Mic input volume (Camera to PC)]. (→2.3.2.1 Live image pages of Fixed Cameras) (→2.3.2.2 Live image pages of the PTZ camera) (→2.3.2.3 Live image pages of Multi-directional Cameras) (→2.3.2.4 Live image pages of Multi-directional/PTZ integrated cameras) ・ Due to the change of icons on the live screen of Aero PTZ cameras, the images on the live screen of PTZ cameras listed have been replaced. A single picture of all models of PTZ cameras is available. (→2.3.2.2 Live image pages of the PTZ camera) ・ [Detailed setting] key was added to the settings menu on the tablet device screen. (→2.4.2.1 Viewing images of Fixed cameras from a tablet terminal) (→2.4.2.2 View PTZ camera images from a tablet terminal) (→2.4.2.3 Viewing Multi-directional Camera Images from a Tablet Terminal) (→2.4.2.4 Viewing images of the Multi-directional/PTZ camera from the tablet terminal) ・ About the Camera-specific data table The size of the [RAM capacity] of the new X fixed camera([Model name]) has been changed from "450MB" to "1024MB".(→6.1 [Software mng.] for installing, uninstalling, and upgrading function extension software) ・ Added [Host name] to "IPv4 network".(→17.1 Networking [Network]) ・ The Server Certificate in PKCS#12 format is now supported. Accordingly, a field for entering [Password (0 to 30 characters)] was added to change from [CA Certificate install] to [Server certificate or server certificate with private key].(→17.2.5 Set up HTTPS) ・ [CA Certificate] has been changed to [Server Certificate] in HTTPS settings window.(→17.2.5 Set up HTTPS) |
Revised description |
・ Added a note about the "Camera continues to move in the tilt direction even after you have finished operating it with the control pad on [PTZ] tab of Live image pages."(→21.2 Trouble!?) |
Add new product |
|
Add new product |
|
New functions and addendum (Firmware Ver.2.85／[New X Fixed][AI Outdoor IR BulletX] Ver.3.45) |
・ The earpiece button and transmission button were added at the top of the live image screen. In conjunction with the above, the images on the live screen of cameras listed have been replaced. A single picture of all models of cameras is available. (→2.3.2.1 Live image pages of Fixed Cameras) (→2.3.2.2 Live image pages of the PTZ camera) (→2.3.2.3 Live image pages of Multi-directional Cameras) (→2.3.2.4 Live image pages of Multi-directional/PTZ integrated cameras) ・ Detailed settings have been added for alarm types that link to HTTP alarm notification settings. (→15.12.2 Set the HTTP alarm notification) |
Revised description |
・ Added a note about the "Cannot unmute earpiece volume in live video when accessed in HTTPS."(→21.2 Trouble!?) |
Revision described |
・ The description of white LED Light was added for the explanation on [Auto2(IR Light)] in [Day & Night(IR)].(→11.4.1 To adjust the image quality (image quality adjustment screen)) ・ Revision of important descriptions regarding the disturbance detection function.(→15.7 [SCD area] to set up undesired detection) |
Add new product |
|
Revision described |
・ |