9[Image/Audio] for setting images and sound files

Image/audio pages configure JPEG images, H.265 images and H.264 images, and set image quality and sound.
Video/Audio pages consist of the [Image], [Image quality], and [Audio] tabs.
[Note:]

・The items that can be set differ depending on the function of the model.


・Refer to the catalog specifications for the functions installed in each model.


Click the [Image] tabs on the video pages. Refer to the following how to display and operate the Advanced menu.
5.1 How to display
5.2 How to operate
[Image capture mode]
Select the image to be displayed on the live image, etc.
Model
Image capture mode
Rapid PTZ camera (X/S series, Image capture size: 2MP), Multi-directional + PTZ (PTZ part)
16:9 mode(30fps mode)
16:9 mode(25fps mode)
16:9 mode(60fps mode)
16:9 mode(50fps mode)
4:3 mode(15fps mode)
4:3 mode(12.5fps mode)
4:3 mode(30fps mode)
4:3 mode(25fps mode)
Rapid PTZ Camera(X/S Series, Image capture size: 8M (4K)), Rapid PTZ Camera(X/S Series, Image capture size: 6MP), Indoor PTZ cameras
16:9 mode(30fps mode)
16:9 mode(25fps mode)
Multi-directional cameras (8-megapixel models)
8 megapixels [16:9](15 fps mode)
8 megapixels [16:9](12.5 fps mode)
8 megapixels [16:9](15 fps Dual mode)
8 megapixels [16:9](12.5 fps Dual mode)
Multi-directional camera (5-megapixel model)
5 megapixels [16:9](15fps mode)
5 megapixels [16:9](12.5fps mode)
5 megapixels [16:9](15fps Quad mode)
5 megapixels [16:9](12.5fps Quad mode)
5 megapixels [4:3](15fps mode)
5 megapixels [4:3](12.5fps mode)
5 megapixels [4:3](15fps Quad mode)
5 megapixels [4:3](12.5fps Quad mode)
Multi-directional camera (4-megapixel model)
4 mega pixel [16:9](30fps mode)
4 mega pixel [16:9](25fps mode)
4 mega pixel [16:9](30fps Dual mode)
4 mega pixel [16:9](25fps Dual mode)
Compact Dome cameras (X/S series, Image capture size: 4MP)
Compact Dome cameras (U series, Image capture size: 4MP)
16:9 mode(30fps mode)
16:9 mode(25fps mode)
16:9 mode(2688x1520 30fps mode)
16:9 mode(2688x1520 25fps mode)
4:3 mode(15fps mode)
4:3 mode(12.5fps mode)
4:3 mode(30fps mode)
4:3 mode(25fps mode)
Compact Dome cameras (X/S series, Image capture size: 2MP)
16:9 mode(30fps mode)
16:9 mode(25fps mode)
16:9 mode(60fps mode)
16:9 mode(50fps mode)
4:3 mode(15fps mode)
4:3 mode(12.5fps mode)
4:3 mode(30fps mode)
4:3 mode(25fps mode)
Compact Dome cameras (U series, Image capture size: 2MP)
16:9 mode(30fps mode)
16:9 mode(25fps mode)
4:3 mode(30fps mode)
4:3 mode(25fps mode)
New X Fixed Cameras (Image capture size: 2MP)
16:9 mode(30fps mode)
16:9 mode(25fps mode)
16:9 mode(60fps mode)
16:9 mode(50fps mode)
4:3 mode(30fps mode)
4:3 mode(25fps mode)
4:3 mode(60fps mode)
4:3 mode(50fps mode)
New X Fixed Cameras (Image capture size: 5MP)
16:9 mode(30fps mode)
16:9 mode(25fps mode)
16:9 mode(60fps mode)
16:9 mode(50fps mode)
4:3 mode(30fps mode)
4:3 mode(25fps mode)
4:3 mode(60fps mode)
4:3 mode(50fps mode)
New X Fixed Cameras (Image capture size: 6MP)
16:9 mode(30fps mode)
16:9 mode(25fps mode)
16:9 mode(60fps mode)
16:9 mode(50fps mode)
New X Fixed Cameras (Image capture size: 8MP)
16:9 mode(30fps mode)
16:9 mode(25fps mode)
16:9 mode(60fps mode)
16:9 mode(50fps mode)
Corner cameras
16:9 mode(30fps mode)
16:9 mode(25fps mode)
4:3 mode(30fps mode)
4:3 mode(25fps mode)
[Important]

・If you change the image pickup mode setting with the following area setting, the position will be misaligned. Therefore, after setting the imaging mode, set each area.
Mask area
9.4.2 Set the mask area
-Privacy Zone
9.4.6 Setting the privacy zone (Privacy zone setting screen)
-Operation detection area
12.6 [VMD area] to set the motion detection area
Undesired detection area
12.8 [SCD area] to set up undesired detection areas
VIQS area
9.4.8 Set up the VIQS area
-overlay image
8.5 [Overlay image] to set overlays


・The [16:9 mode(60fps mode)]/[16:9 mode(50fps mode)]/[4:3 mode(15fps mode)]/[4:3 mode(12.5fps mode)] imaging modes do not allow the use of advanced features or autotracking features.


・[MULTI] If a slow shutter mode is set during operation, such as at night, it may take a lot of time to complete the setting.


・[New X Fixed]If [Stabilizer] is set to [On] when [16:9 mode(60fps mode)]/[16:9 mode(50fps mode)]/[4: 3 mode (60fps mode)]/[4: 3 mode (50fps mode)] is set to Image capture mode, it is changed to [Off].If so, a reboot will be performed.


[Note:]

・If the VIQS area is enabled, make sure that the VIQS settings do not exceed the maximum range after changing the aspect ratio from [4:3] to [16:9].


・In 2 megapixels [16:9] (60 fps mode), when multiple streams are delivered, 60 fps delivery is not possible and the image may be displayed intermittently. If the voice is simultaneously delivered, the data will be delivered at 30 fps.
For other terms and conditions regarding stream delivery, please refer to our technical information website.<Control No. C0309>.


Click on the [Image] tabs of the video and audio pages. Refer to the following how to display and operate the Advanced menu.
5.1 How to display
5.2 How to operate
Live image (initial display)
Here, the default setting to be displayed on the live picture is performed.
[Initial display stream]
Select the images to be displayed in Live image pages from the following.
Compact camera(U series)
JPEG(1)/ JPEG(2)/ [Stream(1)]/[Stream(2)]/[Stream(3)]/[Stream(4)]
Rapid PTZ Cameras, Indoor PTZ cameras, Compact camera(S series), New X fixed camera, Corner cameras
JPEG(1)/ JPEG(2)/ [Stream(1)]/[Stream(2)]/[Stream(3)]/[Stream(4)]/[Multi-screen]
Multi-directional + PTZ (PTZ part)
JPEG(1)/ JPEG(2)/ [Stream(1)]/[Stream(2)]/[Stream(3)]/[Stream(4)]/[Multi-sensor + PTZ]
Multi-directional cameras
[4 image display stream(2)], [3 image display stream(2)], [2 image display stream(2)], [4 image display JPEG], [3 image display JPEG], [2 image display JPEG], [2 image display JPEG], [2 image display 1 stream(1)], [Camera 1 stream(2)], [Camera 1 JPEG], [Camera 2 stream(1)], [Camera 2 stream(2)], [Camera 2 JPEG], [Camera 3 stream(1)], [Camera 3 stream(2)], [Camera 3 JPEG], [Camera 4 stream(1)], [Camera 4 stream(2)], [Camera 4 JPEG]/[Camera 4 JPEG]/ [Multi-sensor + PTZ]
[Note:]

・Selecting JPEG enables you to select the update interval.
MJPEG/ [Refresh interval : 1s]/[Refresh interval : 3s]/[Refresh interval : 5s]/[Refresh interval : 10s]/[Refresh interval : 30s]/[Refresh interval : 60s]


・The streams can be selected when [Stream transmission] is [On].


・[MULTI] When [4 image display JPEG]/[3 image display JPEG] is selected, [Refresh interval : 1s] [Still image update: 3 seconds] cannot be selected.


・[MULTI] Select [4 image display stream (2)], [3 image display stream (2)], [4 image display JPEG], or [3 image display JPEG] to select the following display method.
[4 split]/[360 deg.]
[3 split]/[270 deg.]


・[MULTI] Four-image display is available for the four-eye model.


・[MULTI] Three-image display is available for the three-eye model.


・[MULTI_PTZ] Only Multi-directional/PTZ-integrated cameras can be selected for [Multi-directional + PTZ].


[JPEG image updating speed (movie)*]
Select the rate at which the JPEG image is updated.

If [Image capture mode] is set to [Single source [4:3](30fps mode)]/[Dual sources [4:3](15fps mode)]/[60fps mode]:
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps/2fps/ 3fps/ 5fps/ 6fps/ 10fps/ 12fps/ 15fps/ 30fps


If [Image capture mode] is set to [Single source [4:3](25fps mode)]/[Dual sources [4:3](12.5fps mode)]/[50fps mode]:
0.08fps/ 0.17fps/ 0.28fps/ 0.42fps/ 1fps/ 2.1fps/ 3.1fps/ 4.2fps/ 5fps/ 8.3fps/ 12.5fps/ 25fps


[Note:]

・If [Stream transmission] is set to [On] and the value with [*] is set, the image updating rate may be lower than the set value. The value with [*] depends on the model. Refer to this item on the detailed camera setting screen for the relevant parameters.


・The [*] option is omitted.


・Depending on the network environment, resolution, image quality, number of simultaneous accesses, etc., the image update rate may be lower than the set value.


・If the image is not delivered at the set image update rate, you can reduce the resolution and image quality to close to the set value.


・The updating speed up to the value of the selected imaging mode can be selected.


JPEG
Here, the [Image capture size] [Image quality] of JPEG is set. For settings for H.265 (or H.264) images, see below.
9.3 [Image] for setting up streams
[Note:]

・[MULTI] This setting is common to all cameras.


・[New X Fixed-8M][New X Fixed-5M] If [Image capture mode] is set to [60fps mode] or [50fps mode], [JPEG1][JPEG2] cannot be used.


[Image capture size]
When displaying a JPEG image, select the Image capture size of the image to be displayed.
Please refer to the following for the relationship between your model and symbols and terminology.
1.2 Compatible models and symbols in this manual
New X fixed camera
Aircraft type
Image capture mode
JPEG1
JPEG2
New X Fixed Cameras
(Image capture size: 2MP)
16:9 mode(30fps mode)
16:9 mode(25fps mode)
16:9 mode(60fps mode)
16:9 mode(50fps mode)
1920x1080
1280x720
640x360
640x360
320x180
4:3 mode(30fps mode)
4:3 mode(25fps mode)
4:3 mode(60fps mode)
4:3 mode(50fps mode)
2048x1536
1280x960
640x480
640x480
320x240
New X Fixed Cameras
 (Image capture size: 5MP)
16:9 mode(30fps mode)
16:9 mode(25fps mode)
Only the same Image capture size set for stream (1), stream (2), stream (3) and JPEG (2) can be selected.
640x360
16:9 mode(60fps mode)
16:9 mode(50fps mode)
-
-
4:3 mode(30fps mode)
4:3 mode(25fps mode)
Only the same Image capture size set for stream (1), stream (2), stream (3) and JPEG (2) can be selected.
640x480
4:3 mode(60fps mode)
4:3 mode(50fps mode)
-
-
New X Fixed Cameras
 (Image capture size: 6MP)
16:9 mode(30fps mode)
16:9 mode(25fps mode)
Only the same Image capture size set for stream (1), stream (2), stream (3) and JPEG (2) can be selected.
640x360
16:9 mode(60fps mode)
16:9 mode(50fps mode)
-
-
New X Fixed Cameras
 (Image capture size: 8MP)
16:9 mode(30fps mode)
16:9 mode(25fps mode)
Only the same Image capture size set for stream (1), stream (2), stream (3) and JPEG (2) can be selected.
640x360
16:9 mode(60fps mode)
16:9 mode(50fps mode)
-
-
Compact camera
Aircraft type
Image capture mode
JPEG1
JPEG2
Compact camera
(X/S series, Image capture size: 4MP)
16:9 mode(30fps mode)
16:9 mode(25fps mode)
Only the same Image capture size set for stream (1), stream (2), stream (3) and JPEG (2) can be selected.
640x360
16:9 mode(2688x1520 30fps mode)
16:9 mode(2688x1520 25fps mode)
Only the same Image capture size set for stream (1), stream (2), stream (3) and JPEG (2) can be selected.
640x360
4:3 mode(30fps mode)
4:3 mode(25fps mode)
1280x960
640x480
320x240
640x480
4:3 mode(15fps mode)
4:3 mode(12.5fps mode)
2048x1536
1280x960
640x480
320x240
640x480
Compact camera
(X/S series, Image capture size: 2MP)
16:9 mode(30fps mode)
16:9 mode(25fps mode)
1920x1080
1280x720
640x360
320x180
640x360
16:9 mode(60fps mode)
16:9 mode(50fps mode)
1920x1080
1280x720
640x360
320x180
640x360
4:3 mode(30fps mode)
4:3 mode(25fps mode)
1280x960
640x480
320x240
640x480
4:3 mode(15fps mode)
4:3 mode(12.5fps mode)
2048x1536
1280x960
640x480
320x240
640x480
Compact camera
(U series, Image capture size: 4MP)
16:9 mode(30fps mode)
16:9 mode(25fps mode)
Only the same Image capture size set for stream (1), stream (2), stream (3) and JPEG (2) can be selected.
640x360
16:9 mode(2688x1520 30fps mode)
16:9 mode(2688x1520 25fps mode)
2688x1520
1920x1080
1280x720
640x360
640x360
4:3 mode(30fps mode)
4:3 mode(25fps mode)
1280x960
640x480
320x240
640x480
4:3 mode(15fps mode)
4:3 mode(12.5fps mode)
2048x1536
1280x960
640x480
320x240
640x480
Compact camera
(U series, Image capture size: 2MP)
16:9 mode(30fps mode)
16:9 mode(25fps mode)
1920x1080
1280x720
640x360
320x180
640x360
4:3 mode(30fps mode)
4:3 mode(25fps mode)
1280x960
640x480
320x240
640x480
Corner cameras
Aircraft type
Image capture mode
JPEG1
JPEG2
Corner cameras
16:9 mode(30fps mode)
16:9 mode(25fps mode)
Only the same Image capture size set for stream (1), stream (2), stream (3), stream (4) and JPEG (2) can be selected.
640x360
4:3 mode(30fps mode)
4:3 mode(25fps mode)
Only the same Image capture size set for stream (1), stream (2), stream (3), stream (4) and JPEG (2) can be selected.
VGA
PTZ cameras
Aircraft type
Image capture mode
JPEG1
JPEG2
Rapid PTZ camera (X/S series, Image capture size: 2MP), Multi-directional + PTZ (PTZ part), Next generation aero PTZ cameras (Image capture size: 2MP)
16:9 mode(30fps mode)
16:9 mode(25fps mode)
16:9 mode(60fps mode)
16:9 mode(50fps mode)
1920x1080

1280x720

640x360
640x360
320x180

4:3 mode(30fps mode)
4:3 mode(25fps mode)
1280x960
640x480
640x480
320x240

4:3 mode(15fps mode)
4:3 mode(12.5fps mode)
2048x1536
1280x960

640x480
640x480
320x240

Rapid PTZ Camera(X/S Series, Image capture size: 8M (4K)), Indoor PTZ cameras (Image capture size: 8M (4K))
16:9 mode(30fps mode)
16:9 mode(25fps mode)
3840x2160
2560x1440
1920x1080
1280x720
640x360
640x360*1
320x180
Only the same Image capture size set for stream (1), stream (2), stream (3), stream (4) and JPEG (2) can be selected.
Rapid PTZ Camera(X/S Series, Image capture size: 6MP), Indoor PTZ cameras (Image capture size: 6MP)
16:9 mode(30fps mode)
16:9 mode(25fps mode)
3328x1872
2560x1440
1920x1080
1280x720
640x360
640x360*1
320x180
Only the same Image capture size set for stream (1), stream (2), stream (3), stream (4) and JPEG (2) can be selected.

*1 JPEG (2) is set to [1280x720] if [640x360] is not selected for the resolution set in Streams (1), Streams (2), Streams (3), Streams (4), and JPEG (1) and four resolutions are set.


Multi-directional camera
Aircraft type
Imaging mode
JPEG1
JPEG2
Multi-directional cameras (8-megapixel models)
8 megapixels [16:9](15 fps mode)
8 megapixels [16:9](12.5 fps mode)
3840x2160
--
(Without function)
2560x1440
1920x1080
1280x720
640x360
320x180
8 megapixels [16:9](15 fps Dual mode)
8 megapixels [16:9](12.5 fps Dual mode)
3840x2160
2560x1440
1920x1080
1280x720
640x360
Multi-directional camera (5-megapixel model)
5 megapixels [16:9](15fps mode)
5 megapixels [16:9](12.5fps mode)
3072x1728
2560x1440
1920x1080
1280x720
640x360
320x180
5 megapixels [16:9](15fps Quad mode)
5 megapixels [16:9](12.5fps Quad mode)
3072x1728
2560x1440
1920x1080
1280x720
640x360
5 megapixels [4:3](15fps mode)
5 megapixels [4:3](12.5fps mode)
3072x2304
2560x1920
1280x960
640x480
320x240
5 megapixels [4:3](15fps Quad mode)
5 megapixels [4:3](12.5fps Quad mode)
3072x2304
2560x1920
1280x960
640x480
Multi-directional camera (4-megapixel model)
4 mega pixel [16:9](30fps mode)
4 mega pixel [16:9](25fps mode)
2688x1520
2560x1440
1920x1080
1280x720
640x360
320x180
4 mega pixel [16:9](30fps Dual mode)
4 mega pixel [16:9](25fps Dual mode)
2688x1520
2560x1440
1920x1080
1280x720
640x360
[Image quality]
Set the quality of JPEG images at each resolution.
[0 Super fine]/[1 Fine]/2/ 3/ 4/ [5 Normal]/6/ 7/ 8/ [9 Low]
Click on the [Image] tabs of the video and audio pages. Refer to the following how to display and operate the Advanced menu.
5.1 How to display
5.2 How to operate
Here, H.265 (or H.264) images [bit rate per client], [Image capture size], [Image quality]
Configure, for example. For the settings of the JPEG image, refer to the following.
9.2 [Image] for setting JPEG images
Stream
A stream is a system that simultaneously delivers images with different resolution and frame rates.
The number of streams that can be delivered at the same time is expressed as the number of streams.
The number of streams depends on the model. Refer to the catalog specifications for the number of streams for each model.
[Stream transmission]
Use [On] or [Off] to set whether to deliver H.265 (or H.264) images.
[On]:Deliver H.265 (or H.264) images.
[Off]:The H.265 (or H.264) image is not delivered.
[Note:]

・If you set [Stream transmission] to [On], you can view both H.265 (or H.264) and JPEG images on live picture pages.


・If one of the streams' [Stream transmission] is set to [On], the image update rate of the JPEG image is limited.
For information about the rate of updating JPEG images when [Stream transmission] is set to [On], see below.
2.3.1 View camera images


・[MULTI] If any one of the [Stream transmission] cameras is set to [On], the image updating rate of the JPEG image is limited.


・[MULTI] This setting can be set individually by each camera.


[Stream encoding format]
Select the compression method for the stream to be delivered.
H.265:H.265 images are delivered.
H.264:H.264 images are delivered.
[Note:]

・[MULTI] This setting is common to all cameras.


[Image capture size]
Select the resolution of the H.265 (or H.264) image from the following. Selection may be limited depending on the selected resolution.
Please refer to the following for the relationship between your model and symbols and terminology.
1.2 Compatible models and symbols in this manual
New X Fixed Cameras
Aircraft type
Image capture mode
H.265/H.264
Stream 1
Stream 2
Stream 3
Stream 4
New X Fixed Cameras
 (Image capture size: 2MP)
16:9 mode(30fps mode)
16:9 mode(25fps mode)
16:9 mode(60fps mode)
16:9 mode(50fps mode)
1920x1080
1920x1080
1280x720
1280x720
1280x720
640x360
640x360
640x360
640x360
320x180
320x180
320x180
320x180
4:3 mode(30fps mode)
4:3 mode(25fps mode)
4:3 mode(60fps mode)
4:3 mode(50fps mode)
2048x1536
1280x960
1280x960
VGA
VGA
VGA
VGA
QVGA
QVGA
QVGA
QVGA
New X Fixed Cameras
 (Image capture size: 5MP)
16:9 mode(30fps mode)
16:9 mode(25fps mode)
3072x1728
3072x1728
2560x1440
2560x1440
1920x1080
1920x1080
1280x720
1280x720
1280x720
1280x720
640x360
640x360
640x360
320x180
320x180
320x180
16:9 mode(60fps mode)
16:9 mode(50fps mode)
3072x1728
--
(Without function)
--
(Without function)
--
(Without function)
2560x1440
4:3 mode(30fps mode)
4:3 mode(25fps mode)
3072x2304
3072x2304
2560x1920
2560x1920
1280x960 
1280x960 
800x600
VGA
VGA
VGA
400x300
QVGA
QVGA
QVGA
4:3 mode(60fps mode)
4:3 mode(50fps mode)
3072x2304
--
(Without function)
--
(Without function)
--
(Without function)
2560x1920
New X Fixed Cameras
 (Image capture size: 6MP)
16:9 mode(30fps mode)
16:9 mode(25fps mode)
3328x1872
3328x1872
2560x1440
2560x1440
1920x1080
1920x1080
1280x720
1280x720
1280x720
1280x720
640x360
640x360
640x360
320x180
320x180
320x180
16:9 mode(60fps mode)
16:9 mode(50fps mode)
3328x1872
--
(Without function)
--
(Without function)
--
(Without function)
2560x1440
New X Fixed Cameras
 (Image capture size: 8MP)
16:9 mode(30fps mode)
16:9 mode(25fps mode)
3840x2160
3840x2160
2560x1440
2560x1440
1920x1080
1920x1080
1280x720
1280x720
1280x720
1280x720
640x360
640x360
640x360
320x180
320x180
320x180
16:9 mode(60fps mode)
16:9 mode(50fps mode)
3840x2160
--
(Without function)
--
(Without function)
--
(Without function)
3840x2160
Compact Dome camera (X series) and Compact Dome camera (S series)
Aircraft type
Image capture mode
H.265/H.264
Stream 1
Stream 2
Stream 3
Stream 4
Compact Dome cameras
(X/S Series, Image capture size: 4MP)
16:9 mode(2688x1520 30fps mode)
16:9 mode(2688x1520 25fps mode)
2688x1520
1920x1080
1280x720

1920x1080
1280x720
640x360
320x180



640x360
320x180
--
(Without function)
16:9 mode(30fps mode)
16:9 mode(25fps mode)
2560x1440
1920x1080
1280x720

1920x1080
1280x720
640x360
320x180



640x360
320x180
4:3 mode(30fps mode)
4:3 mode(25fps mode)
1280x960
640x480
320x240
1280x960
640x480
320x240

640x480
320x240
4:3 mode(15fps mode)
4:3 mode(12.5fps mode)
2048x1536

1280x960
640x480
320x240


640x480
320x240
Compact Dome cameras
(X/S Series, Image capture size: 2MP)
16:9 mode(60fps mode)
16:9 mode(50fps mode)
1920x1080
1280x720
640x360
320x180
1920x1080
1280x720
640x360
320x180

1280x720
640x360
320x180


640x360
320x180
16:9 mode(30fps mode)
16:9 mode(25fps mode)
1920x1080
1280x720
640x360
320x180
1920x1080
1280x720
640x360
320x180

1280x720
640x360
320x180


640x360
320x180
4:3 mode(30fps mode)
4:3 mode(25fps mode)
1280x960
640x480
320x240
1280x960
640x480
320x240

640x480
320x240

640x360
320x180
4:3 mode(15fps mode)
4:3 mode(12.5fps mode)
2048x1536

1280x960
640x480
320x240


640x480
320x240


640x480
320x240
Compact Dome camera (U series)
Aircraft type
Image capture mode
H.265/H.264
Stream 1
Stream 2
Stream 3
Stream 4
Compact Dome cameras
(U Series, Image capture size: 4MP)
16:9 mode(2688x1520 30fps mode)
16:9 mode(2688x1520 25fps mode)
2688x1520
1920x1080
1280x720
--
(Without function)
--
(Without function)
--
(Without function)
16:9 mode(30fps mode)
16:9 mode(25fps mode)
2560x1440
1920x1080
1280x720

1920x1080
1280x720
640x360
320x180



640x360
320x180
4:3 mode(30fps mode)
4:3 mode(25fps mode)
1280x960
640x480
320x240
1280x960
640x480
320x240

640x480
320x240
4:3 mode(15fps mode)
4:3 mode(12.5fps mode)
2048x1536

1280x960
640x480
320x240


640x480
320x240
Compact Dome cameras
(U Series, Image capture size: 2MP)
16:9 mode(30fps mode)
16:9 mode(25fps mode)
1920x1080
1280x720
640x360
320x180
1920x1080
1280x720
640x360
320x180

1280x720
640x360
320x180


640x360
320x180
4:3 mode(30fps mode)
4:3 mode(25fps mode)
1280x960
640x480
320x240
1280x960
640x480
320x240

640x480
320x240

640x360
320x180
Corner cameras
Aircraft type
Image capture mode
H.265/H.264
Stream 1
Stream 2
Stream 3
Stream 4
Corner cameras
16:9 mode(30fps mode)
16:9 mode(25fps mode)
3072x1728
2560x1440
3072x1728
2560x1440
1920x1080
1280x720
640x360
320x180



1280x720
640x360
320x180



1280x720
640x360
320x180
4:3 mode(30fps mode)
4:3 mode(25fps mode)
3072x2304
2560x1920
3072x2304
2560x1920
1280x960
800x600
VGA
400x300
QVGA




VGA

QVGA




VGA

QVGA
PTZ cameras
Aircraft type
Image capture mode
H.265/H.264
Stream 1
Stream 2
Stream 3
Stream 4
Rapid PTZ camera (X/S series, Image capture size: 2MP), Multi-directional + PTZ (PTZ part)
16:9 mode(30fps mode)
16:9 mode(25fps mode)
16:9 mode(60fps mode)
16:9 mode(50fps mode)
1920x1080
1920x1080
1280x720
1280x720
1280x720
640x360
640x360
640x360
640x360
320x180
320x180
320x180
320x180
4:3 mode(30fps mode)
4:3 mode(25fps mode)
1280x960
1280x960
VGA
VGA
VGA
VGA
QVGA
QVGA
QVGA
QVGA
4:3 mode(15fps mode)
4:3 mode(12.5fps mode)
2048x1536




1280x960

VGA
VGA
VGA

QVGA
QVGA
QVGA
Rapid PTZ Camera(X/S Series, Image capture size: 8M (4K)), Indoor PTZ cameras (Image capture size: 8M (4K))
16:9 mode(30fps mode)
16:9 mode(25fps mode)
3840x2160
3840x2160
2560x1440
2560x1440
1920x1080
1280x720
1280x720
1280x720
640x360
640x360
640x360
320x180
320x180
320x180
Rapid PTZ Camera(X/S Series, Image capture size: 6MP), Indoor PTZ cameras (Image capture size: 6MP)
16:9 mode(30fps mode)
16:9 mode(25fps mode)
3328x1872
3328x1872
2560x1440
2560x1440
1920x1080
1280x720
1280x720
1280x720
640x360
640x360
640x360
320x180
320x180
320x180
Multi-directional camera
Aircraft type
Imaging mode
H.265/H.264
Stream 1
Stream 2
Stream 3
Stream 4
Multi-directional cameras (8-megapixel models)
8 megapixels [16:9](15 fps mode)
8 megapixels [16:9](12.5 fps mode)
3840x2160
--
(Without function)
--
(Without function)
2560x1440
1920x1080

1280x720

640x360

320x180
8 megapixels [16:9](15 fps Dual mode)
8 megapixels [16:9](12.5 fps Dual mode)
3840x2160
2560x1440
1920x1080

1280x720

640x360

320x180
Multi-directional camera (5-megapixel model)
5 megapixels [16:9](15fps mode)
5 megapixels [16:9](12.5fps mode)
3072x1728
2560x1440
1920x1080

1280x720

640x360

320x180
5 megapixels [16:9](15fps Quad mode)
5 megapixels [16:9](12.5fps Quad mode)
3072x1728
2560x1440
1920x1080


1280x720

640x360
5 megapixels [4:3](15fps mode)
5 megapixels [4:3](12.5fps mode)
3072x2304
2560x1920
1280x960

VGA

QVGA
5 megapixels [4:3](15fps Quad mode)
5 megapixels [4:3](12.5fps Quad mode)
3072x2304
2560x1920
1920x1080
1280x960

640x480
Multi-directional camera (4-megapixel model)
4 mega pixel [16:9](30fps mode)
4 mega pixel [16:9](25fps mode)
2688x1520
2560x1440
1920x1080
1280x720
1280x720

640x360

320x180
4 mega pixel [16:9](30fps Dual mode)
4 mega pixel [16:9](25fps Dual mode)
2688x1520
2560x1440

1920x1080

1280x720
1280x720
640x360
[Note:]

・If [Image rotation] is set to [90°] or [270°] on the [Basic] tabs of the basic pages, the resolution [320x180] cannot be set.


・[New X Fixed]Image capture size [320x180] can be set even if [Image rotation] is set to [90°] or [270°] on [Basic] tab. of the basic page.


・[MULTI] This setting is common to all cameras.


・[MULTI2] When Stream (1) is 2688x1520 and Stream (2) is 1280x720, the frame rate is limited to a maximum of 15fps (maximum 12.5fps in 25fps mode).


[Transmission priority]
Set the stream delivery mode from the following.
・ [Constant bit rate]:The H.265 (or H.264) images are delivered at the bit rate set by [Max bit rate (per client) *].
・ [VBR]:The H.265 (or H.264) images are delivered at the frame rate set by [Frame rate*] while maintaining the image quality level set by [Image quality]. At this time, the bit rate is varied within the maximum bit rate set by [Max bit rate (per client) *]. The recording capacity varies depending on the [Image quality] settings and subject conditions.
・ [Frame rate]Deliver H.265 (or H.264) images at the frame rate set by [Frame rate*].
・ [Best effort]The H.265 (or H.264) images are delivered with varying bit rates within the maximum bit rate set by [Max bit rate (per client) *], depending on the bandwidth of the networks.
[Note:]

・Setting [Transmission priority] to [Frame rate] may result in fewer users being able to connect.


[MULTI] This setting is common to all cameras.
[Frame rate*]
Set the frame rate from the following.

-For [16:9 mode(30fps mode)]/[16:9 mode(60fps mode)]/[4:3 mode(30fps mode)]/[4:3 mode(15fps mode)]:
1fps/ 3fps/ 5fps/ 7.5fps/ 10fps/ 12fps/ 15fps/ 20fps/ 30fps/ 60fps


-For [16:9 mode(25fps mode)]/[16:9 mode(50fps mode)]/[4:3 mode(25fps mode)]/[4:3 mode(12.5fps mode)]:
1fps/ 3.1fps/ 4.2fps/ 6.25fps/ 8.3fps/ 12.5fps/ 20fps/ 25fps/ 50fps


[Note:]

・[Frame rate*] is restricted to [Max bit rate (per client) *]. When a value with [*] is set, the frame rate may be lower than the set value. If [Transmission priority] is set to [VBR], the image may be suspended periodically depending on the [Max bit rate (per client) *] and [Image quality] settings. Confirm the image delivered after setting.


・The [*] option is omitted.


・The frame rate up to the value of the selected imaging mode can be selected.


・Depending on the number of concurrent users or the combination of functions used, the frame rate may be lower than the set value. Confirm the image delivered after setting.


・If the frame rate is set low, the image may not be displayed properly depending on the web browser you use.


・60 fps can be selected only when [Image capture mode] is in [16:9 mode (60 fps mode)]. In this case, stream (1) will be [fixed at 60 fps]. [Stream(2)] ~ [Stream(4)] can be up to 10 fps.


・50 fps can be selected only when [Image capture mode] is in [16:9 mode (50 fps mode)]. In this case, stream (1) is set to [Fix 50fps]. [Stream(2)] ~ [Stream(4)] can be up to 8.3 fps.


・[MULTI] This setting is common to all cameras.


・[New X Fixed-8M][New X Fixed-6M]60fps can be selected only when [Image capture mode] is set to [16:9 mode(60fps mode)].In such cases, streaming (1) is set to [60fps fixed]. Also, [Stream(2)] ~ [Stream(4)] will be unavailable.


・[New X Fixed-8M][New X Fixed-6M]50fps can be selected only when [Image capture mode] is set to [16:9 mode(50fps mode)].In such cases, streaming (1) is set to [50fps fixed]. Also, [Stream(2)] ~ [Stream(4)] will be unavailable.


・[New X Fixed-5M]60fps can be selected only when [Image capture mode] is set to [16:9 mode(60fps mode)] [4:3 mode (60fps mode)]. In such cases, streaming (1) is set to [60fps fixed]. Also, [Stream(2)] ~ [Stream(4)] will be unavailable.


・[New X Fixed-5M]50fps can be selected only when [Image capture mode] is set to [16:9 mode(50fps mode)] [4:3 mode (50fps mode)]. In such cases, streaming (1) is set to [50fps fixed]. Also, [Stream(2)] ~ [Stream(4)] will be unavailable.


・[New X Fixed-2M][New X Fixed-5M]60fps can be selected only when [Image capture mode] is set to [16:9 mode(60fps mode)] [4:3 mode (60fps mode)]. In such cases, streaming (1) is set to [60fps fixed].


・[New X Fixed-2M][New X Fixed-5M]50fps can be selected only when [Image capture mode] is set to [16:9 mode(50fps mode)] [4:3 mode (50fps mode)]. In such cases, streaming (1) is set to [50fps fixed].


[Max bit rate (per client) *]
Select H.265 (or H.264) bit rate for one client from the following.
64kbps/128kbps */ 256kbps */ 384kbps */ 512kbps */ 768kbps */ 1024kbps */ 1536kbps */ 2048kbps */ 3072kbps */ 4096kbps */ 6144kbps */ 8192kbps */ 10240kbps */ 122888kbps */ 14336kbps */ 16384kbps */ 20480kbps */ 24576kbps */---free input
If [-----] is selected, the bitrate can be entered freely to the extent that it can be set.
If [Transmission priority] is [Constant bit rate], [Frame rate], or [Best effort]
320x180, 640x360, QVGA, 400x300, VGA, 800x600: 64 kbps to 4096 kbps *
1280x720*1For 1280 x 960: 128 kbps *~ 8192 kbps *
1920x1080*1For: 256 kbps *~ 12288 kbps *
For 2048 x 1536*1: 512 kbps *~ 16384 kbps *
For 2560 x 1440, 2560 x 1920: 768 kbps *~ 24576 kbps *
For 3072 x 1728: 1024 kbps *~ 24576 kbps *
For 3072 x 2304: 1536 kbps *~ 24576 kbps *
3840 x 2160 : 2048 kbps *~ 24576 kbps *
When [Transmission priority] is [VBR]
320x180, 640x360, QVGA, 400x300, VGA, 800x600: 64 kbps to 12288 kbps *
1280x720*1For 1280 x 960: 128 kbps *~ 12288 kbps *
1920x1080*1In the case: 256 kbps *~ 24576 kbps *
For 2048 x 1536: 512 kbps *~ 24576 kbps *
For 2560 x 1440, 2560 x 1920: 768 kbps *~ 24576 kbps *
For 2688 x 1520: 768 kbps to 24576 kbps
For 3072 x 1728: 1024 kbps *~ 24576 kbps *
For 3072 x 2304: 1536 kbps *~ 24576 kbps *
For 3840 x 2160: 2048 kbps *~ 24576 kbps *
[Note:]

・Refer to the catalog specifications for resolutions that can be selected for each model.


・The bit rate of streams is restricted to [Bandwidth control(bit rate)] on the [Network] tabs of network pages. Therefore, when the value with [*] is set, the image may not be delivered.
14.1 Networking [Network]


・It is recommended that the bit rate of the stream be set to 8192 kbps or less. If a value greater than 8192 kbps is set, the continuity of recorded images may be abnormal.


・When the refresh interval is short, the bit rate may be exceeded depending on the subject.


・Depending on the number of concurrent users or the combination of functions used, the bit rate may be lower than the set value. Confirm the image delivered after setting.


・If you use [60fps mode] or [50fps mode] at the resolution of *1, you can set up to 24576 kbps.


・[MULTI] This setting is common to all cameras.


[Image quality]
Select the image quality for the H.265 (or H.264) image from the following.
For [Constant bit rate], [Frame rate], [Best effort]:Movement priority/Standard/Image quality priority
For [VBR]: [0 maximum image quality]/[1 Fine]/2/3/4/[5 Normal]/6/7/8/[9 Low]
Smart Coding-[Auto VIQS]
Images are distributed so that the quality of images in moving places is high and the amount of data in other places is low.
[Off]:Auto VIQS is not used.
[On]:It keeps the image quality in the moving place high and reduces the amount of data in other places.
Smart Coding-[Smart VIQS]
Images are distributed so that the amount of data decreases while maintaining high image quality in areas with objects (head, people, cars and motorcycles) and low/medium/medium image quality in other areas.
[Off]:Do not use smart VIQS.
[On(High)]:Images are distributed so that the image quality in the area where the object (head, people, automobiles, and motorcycles) is located is maintained at a high level, while the image quality in other areas is maintained at a low level and the amount of data is reduced.
[On(Low)]:Images are distributed so that image quality is high in areas with objects (head, people, cars, and motorcycles) and medium image quality is maintained in other areas while data volume is low.
[Note:]

・This function can be used with [Stream(1)] only. If [On(High)] or [On(Low)] is selected, the VIQS settings are disabled from the [Image quality] tabs.


・[MULTI4] [MULTI3] When [Smart VIQS] is set to [On(High)] or [On(Low)], the frame rate is limited to 7.5 fps maximum in 15 fps mode, 6.25 fps maximum in 12.5 fps mode, 15 fps maximum in 30 fps mode, and 12.5 fps maximum in 25 fps mode.


・[New X Fixed-8M][New X Fixed-6M][New X Fixed-5M]If [Image capture mode] is set to [60fps Mode] or [50fps Mode], [Smart VIQS] cannot be used.


Smart Coding-[Smart P-picture control]
To reduce the amount of data, control the generation of data (macroblock) as little as possible except where there is an object (head, person, car, or motorcycle).
[Off]:Smart P picture control is not used.
[On]:In order to reduce the amount of data, P-picture data is controlled to be generated as little as possible in areas other than those with an object (head, person, car, or motorcycle).
[Note:]

・This function can be used with [Stream(1)] only. If [On] is selected, the VIQS settings are disabled from the [Image quality] tabs.


・When [On] is selected, movement may not be smooth or noise may be generated in areas without objects (heads, people, cars, and motorcycles).


・[MULTI4] [MULTI3] When [Smart P-picture control] is set to [On], the frame rate is limited to 7.5 fps maximum in 15 fps mode, 6.25 fps maximum in 12.5 fps mode, 15 fps maximum in 30 fps mode, and 12.5 fps maximum in 25 fps mode.


・[New X Fixed-8M][New X Fixed-6M][New X Fixed-5M]If [Image capture mode] is set to [60fps Mode] or [50fps Mode], [Smart P-picture control] cannot be used.


Smart Coding-[GOP control]
The GOP control reduces the amount of data.
If [H.265] is selected in [Stream encoding format]: [Off]/Low/Mid/Advanced/Frame rate control
If [H.264] is selected in [Stream encoding format]: [Off]/[Low]/[Mid(variable GOP 4s-16s)]
[Important]

・When [Low], [Mid], [Mid], or [Frame rate control (Variable GOP4s-16s + Frame rate control)] is selected, recording cannot be performed on the SD Memory Card. If Advanced (fixed GOP 60s + 1s keyframe) is selected, the data can be recorded on SD cards only with [Manual] [Schedule].


[Note:]

・Using GOP control increases the refresh interval for the H.265 (or H.264) image. Therefore, do not use in network environments where there are many errors.


・[Low]/[Mid]/[Frame rate control (variable GOP4s-16s + frame rate control)] can be set only when [VBR] is selected in [Transmission priority]. [Advanced (Fixed GOP 60s + 1s keyframe)] can be set regardless of the [Transmission priority].


・[Low (variable GOP 1s-8s)], [Mid (variable GOP 4s-16s)], and [Frame rate control (variable GOP 4s-16s + frame rate control)] can reduce the amount of data when there is no detectable object (face, person, car, or motorcycle) in the image. [Advanced (fixed GOP 60s + 1s keyframe)] reduces the amount of data regardless of the presence or absence of the sensing object.


・When [Frame rate control] is set, the frame rate can be changed from 1fps to [Frame rate*] depending on the presence or absence of the sensing object.


・When [Frame rate control] is set, the display may temporarily slow or fast when the frame rate is switched.


・[MULTI] When [GOP control] is set to [Low(Variable GOP 1s-8s)], [Mid(Variable GOP 4s-16s)], [Advanced(Fixed GOP 60s w/1s key-frame)] or [Frame rate control(Variable GOP 4s‑16s w/frame rate control)] is selected, the bit rate will be limited.


・[MULTI4] [MULTI3] [GOP control] is set to [Low(Variable GOP 1s-8s)], [Mid(Variable GOP 4s-16s)] or [Frame rate control(Variable GOP 4s‑16s w/frame rate control)], the frame rate is limited to 7.5 fps maximum in 15 fps mode, 6.25 fps maximum in 12.5 fps mode, 15 fps maximum in 30 fps mode, and 12.5 fps maximum in 25 fps mode.


・[New X Fixed-8M][New X Fixed-6M][New X Fixed-5M]If [Image capture mode] is set to [60fps Mode] or [50fps Mode], [GOP control] cannot be used.


[Refresh interval]
Select the refresh interval (I-Picture interval: 0.2 to 5 seconds) for the H.265 (or H.264) image from the following.
If there are many errors in the network environment, the image will be less distorted if the refresh interval is shortened.
However, the updating speed of the image may decrease or the bit rate may be exceeded.
[0.2s]/ [0.25s]/ [0.33s]/ [0.5s]/ [1s]/ [2s]/ [3s]/ [4s]/ [5s]
[Note:]

・If [GOP control] is set to Low (variable GOP 1s-8s), the refresh interval is set to 8s.


・If [GOP control] is set to Mid (variable GOP 4s-16s), the refresh interval is set to 16s.


・If [GOP control] is set to Advanced (fixed GOP 60s + 1s keyframe), the refresh interval is set to 60s.


・If [GOP control] is set to [Frame Rate Control (variable GOP 4s-16s + frame rate control)], the frame rate can be varied between values set from 1fps to [Frame rate*] according to the magnitude of the image change. The lower the frame rate, the longer the refresh interval. The maximum refresh interval is 16s.


・[MULTI] This setting is common to all cameras.


[Transmission type]
Select the distribution method of H.265 (or H.264) image from the following.

[Unicast port (AUTO)]:
When sending images and sounds from your computer, [Unicast port1(Image)] and [Unicast port2(Audio)] are automatically set. If you do not need to fix the number of the ports on which the streams are delivered, such as when used in networks, it is recommended that you set it to [Unicast port (AUTO)].


[Unicast port (MANUAL)]:
When sending images and audio from the computer, the [Unicast port1(Image)] and [Unicast port2(Audio)] must be set manually. When accessing a camera using a browser, the port number is automatically selected even in this setting. When distributing a stream over the Internet, fix the port number to be used as the Broadband Router (hereinafter referred to as the Router). For details, refer to the router's instruction manual.
14.1 Networking [Network]


[Multicast]:
You can access this machine at the same time without restricting the number of people. To send streams in multicast, enter [Multicast address], [Multicast port], and [Multicast TTL/HOPLimit].


[Note:]

・For the maximum number of simultaneous unicast accesses, see the following.
2.3.1 View camera images


・If [Unicast port (MANUAL)] is selected, you must configure a unicast port number.


・When multicast is set, the browser will not be able to view the H.265 image (or H.264 image).


・If [Multicast] is selected, you must configure multicast IP addresses.


・[MULTI] This setting is common to all cameras.


[Unicast port1(Image)]
Enter the unicast port number (used to send images from your computer).
Configurable port number:1024 to 50000 (even number only)
[Unicast port2(Audio)]
Enter the unicast port number (to be used when sending audio from your computer).
Configurable port number:1024 to 50000 (even number only)
[Multicast address]
Enter the multicast IP address.
Send images and sound to the specified IP address.
IPv4 configurable range:224.0.0.0~239.255.255.255
IPv6 configurable range:Multicast addresses starting with FF
[Note:]

・Check and enter the available multicast IP address.


[Multicast port]
Enter the multicast port number (used when sending images from your computer).
Configurable port number:1024 to 50000 (even number only)
[Note:]

・When sending audio from your computer, the multicast port number plus [1000] is used.


[Multicast TTL/HOPLimit]
Enter the TTL/HOPLimit value for the
multicast.
Settable value:1~254

[Important]

・When delivering a stream over the Internet, the distribution image may not be displayed depending on the settings of the proxy server, firewall, etc. In this case, contact your network administrator.


・If you want to display multicast images using a PC with multiple LAN cards, disable LAN cards that are not used for reception.


Click on the [Image quality] tabs of the video and audio pages. Refer to the following how to display and operate the Advanced menu.
5.1 How to display
5.2 How to operate
To Advanced Settings for each item>>Clicking this button displays the advanced settings window in a separate window and allows you to set the settings while viewing the images displayed on the [Image quality] tab.
You can set the image quality adjustment, zoom/focus, privacy zone, VIQS, and lens distortion compensation.
Selecting the camera from the pull-down menu at the bottom of the screen displays the live picture of the selected camera. You can view the image quality adjusted on this screen.
[Note:]

・[MULTI] Only Multi-directional cameras can be selected.


[Image adjust]
To Advanced Settings>>When the [button] is clicked, the image quality setting window is displayed in a separate window.
9.4.1 To adjust the image quality (image quality adjustment screen)
[Image adjust]
To Advanced Settings>>When the [button] is clicked, the image quality setting window is displayed in a separate window.
9.4.1 To adjust the image quality (image quality adjustment screen)
[Extra zoom]
To Advanced Settings>>When the button is clicked, the EX zoom setting window is displayed in a separate window.
9.4.3 Adjust the angle of view with the EX zoom
[Extra optical zoom]
To Advanced Settings>>When the button is clicked, the Ex optical zoom setting window is displayed in a separate window.
9.4.4 Adjust the angle of view with the Ex optical zoom
[Zoom/focus adjustment]
To Advanced Settings>>When the button is clicked, the zoom and focus settings window is displayed in a separate window.
9.4.5 Adjust the zoom/focus
[Privacy zone]
To Advanced Settings>>Click the [Privacy Zone] button to open the Privacy Zone Settings window.
9.4.6 Setting the privacy zone (Privacy zone setting screen)
[VIQS]
To Advanced Settings>>Click the [VIQS] button to display the VIQS settings window.
9.4.7 Set up VIQS
[Lens distortion compensation]
To Advanced Settings>>Click this button to display the setting window for lens distortion compensation in a separate window.
9.4.9 Set the lens distortion compensation
[Note:]

・Items displayed differ depending on the model. Refer to the catalog specifications for the functions installed in each model.


・[PTZ] See the following for the operation of the zoom function of the PTZ camera.
10.1 [Cam. Function] for setting the operation of cameras


In the Video/Audio [Image quality] tabs to [Image adjust] Advanced Settings>>Click the [Button].
9.4 [Image quality] to set the image quality
Image quality is set in the setting screen displayed in a separate window. When you change the values, the images displayed on the [Image quality] tabs also reflect the changes.
Click + on the left side of each item in the setting screen to expand each item and display detailed settings.
Click-> on the left of each expanded item to return to the previous window.

<Example: Basic image quality adjustment>
[Camera selection]
Select the camera that reflects the image quality settings.
[Common(Cam. 1-2)]:The settings are made simultaneously for each camera. The images displayed on the [Image quality] tabs are divided into cameras.
[Camera 1]:Sets camera 1 image quality. The image displayed on the [Image quality] tab is the camera-1 image.
[Camera 2]:Sets camera 2 image quality. The image displayed on the [Image quality] tab is camera-2 image.
[Camera 3]:Set the image quality of camera 3. The image displayed on the [Image quality] tab is the camera-3 image.
[Camera 4]:Set the image quality of camera 4. The image displayed on the [Image quality] tab is the camera 4 image.
[Note:]

・[MULTI] [Camera selection] can be selected only for Multi-directional cameras.


・[MULTI] For [Common(Cam. 1-2)], for [Super Dynamic], [Light control mode], [White balance], and Intelligence Auto, only items can be set up prior to the advanced settings. To perform other advanced settings, select each camera.


Basic image quality adjustment
[Brightness]
Adjust the brightness.
Move the slider bar in the [+] direction to brighten the image.
Move the slider bar in the [-] direction to darken the image.
Press [Reset] to return to the default brightness.
[Maximum gain]
Adjust the maximum gain. When the subject's illumination becomes dark, the gain automatically increases and the screen brightens.
Increasing the gain may increase the noise.
Move the slider bar in the [+] direction to increase the maximum gain.
Move the slider bar in the [-] direction to reduce the maximum gain.
Press [Reset] to return to the default settings.
[Chroma gain level]
Adjust the chroma level (color intensity).
When the slider bar is moved in the [+] direction, it becomes bright and bright.
When the slider bar is moved in the [-] direction, the color becomes calm.
Press [Reset] to return to the default settings.
[Sharpness level]
Adjust the sharpness level (contour correction).
Moving the slider bar in the direction of [+] results in a sharp contour, while moving the slider bar in the direction of [-] results in a soft contour.
Press [Reset] to return to the default settings.
[Digital noise reduction]
The digital noise reduction function automatically reduces noise at low illumination levels.
Move the slider bar in the direction of [+] to increase the effect of noise reduction. For more afterimages
I have one.
Moving the slider bar in the direction of [-] reduces the noise reduction effect. There are fewer aftereffects.
Press [Reset] to return to the default settings.
Superdynamic
[Super Dynamic]
You can set [On] or [Off] to activate the super dynamic function.
See [What is Super Dynamic] for details on super dynamic.
[On]:The Super Dynamic function is activated.
[Off]:Stops the superdynamic function.
[Note:]

・This cannot be set when [Image capture mode] is [16:9 mode(60fps mode)] or [16:9 mode(50fps mode)].


・Set [Super Dynamic] to [Off] when the following phenomena are observed depending on the lighting condition.
-when flickering or color changes occur
-when noise is generated in the bright area of the screen


・If [Light control mode] is set to [Fix shutter], [Super Dynamic] cannot be set to [On].


・When [Stabilizer] is set to [On], the superdynamic setting is [Off].


[Level]
Adjust the superdynamic level.
When the slider bar is moved in the [+] direction, you can shoot a subject with a large difference in light and darkness without flipping white or shading black.
Move the slider bar in the [-] direction to take a full picture of the middle brightness.
Press [Reset] to return to the default settings.
What is Superdynamic?
If there is a large difference between the bright and dark areas, the camera will set the lens aperture to match the bright areas, making the dark areas invisible. Conversely, when the lens aperture is adjusted to the dark area, the bright area is not visible.
Super Dynamic is a function of combining images with large brightness and darkness, and images with large darkness, and reproducing brightness and darkness faithfully.
[Note:]

・[New X Fixed-8MP][New X Fixed-6MP][New X Fixed-5MP]If [Level] is set to 30 or higher, [Frame Rate] is limited to the highest 15fps.


[BLC/ HLC]
Select from the following. This setting is not available if [Super Dynamic] is set to [On] or [Intelligent Auto] is set to [On].
[Back light compensation(BLC)]:Enables the backlight correction function.
[High light compensation(HLC)]:Enables the high light correction function. Illumination compensation suppresses bright lighting of subjects such as car headlights during nighttime.
[Off]:Stops the backlight compensation function and the intense light correction function.
[BLC level]
Adjust the backlight correction level.
Moving the slider bar in the [+] direction improves the backlight correction effect. Moving the slider bar in the [-] direction reduces the effect of backlight correction.
Press [Reset] to return to the default settings.
[HLC level]
Adjust the intensity correction level.
Moving the slider bar in the [+] direction improves the effect of intense light correction. Moving the slider bar in the [-] direction reduces the effect of intense light correction.
Press [Reset] to return to the default settings.
[Mask area]
When the mask area is set, the set area can be masked and the light intensity can be adjusted. If [Super Dynamic] is set to [On], it cannot be set.
For details on how to set the mask area, refer to the following.
9.4.2 Set the mask area
[Note:]

・[MULTI] When [Common(Cam. 1-2)] is selected in [Camera selection], the mask area cannot be set. Set for each camera.


Light intensity control mode
[Light control mode]
Select the mode to control the light intensity from the following.
[Outdoor scene]:The brightness (illumination) controls the light intensity by combining the electronic shutter and automatic aperture. This setting is used when shooting bright subjects such as outdoors. Be careful not to flicker under fluorescent lights, etc.
[Flickless (50 Hz)]/[Flickless (60 Hz)]:Flicker is automatically corrected with a fluorescent lamp. 50 Hz/60 Hz will be used differently in different regions.
ELC:The electronic shutter is used to control the light intensity.
[Fix shutter]:

If [Image capture mode] is [Single source [4:3](30fps mode)]/[Dual sources [4:3](15fps mode)]:
[1/30 fixed], [3/120 fixed], [2/100 fixed], [2/120 fixed], [1/100 fixed], [1/120 fixed], [1/250 fixed], [1/500 fixed], [1/1000 fixed], [1/2000 fixed], [1/4000 fixed], or [1/10000 fixed]


If [Image capture mode] is [Single source [4:3](25fps mode)]/[Dual sources [4:3](12.5fps mode)]:
[1/25 fixed]/[3/100 fixed]/[2/100 fixed]/[1/100 fixed]/[1/250 fixed]/[1/500 fixed]/[1/1000 fixed]/[1/2000 fixed]/[1/4000 fixed]/[1/10000 fixed]


If [Image capture mode] is in [60fps mode]:
[1/60 fixed]/[1/100 fixed]/[1/120 fixed]/[1/250 fixed]/[1/500 fixed]/[1/1000 fixed]/[1/2000 fixed]/[1/4000 fixed]/[1/10000 fixed]


If [Image capture mode] is in [50fps mode]:
[1/50 fixed]/[1/100 fixed]/[1/250 fixed]/[1/500 fixed]/[1/1000 fixed]/[1/2000 fixed]/[1/4000 fixed]/[1/10000 fixed]


[Note:]

・Refer to the catalogue specifications for the [Light control mode] that can be selected for each model.


・If you increase the shutter speed (~1/10,000), you will be less prone to blur even when the subject moves faster.


・Increasing the shutter speed decreases the sensitivity.


・If [Super Dynamic] is set to [On], [Fix shutter] cannot be set.


・To configure [Fix shutter], set [Super Dynamic] to [Off].


・If [Image capture mode] is [Single source [4:3](25fps mode)], [50fps mode], or [Dual sources [4:3](12.5fps mode)], [Flickerless 60Hz] cannot be set.


・When [25fps mode], [50fps mode], or [12.5fps mode] is selected for [Image capture mode], [Indoor scene(60 Hz)] is not available.


・It may be able to reduce flickering by switching the [Image capture mode] as follows:
– In the area where the power frequency is 60Hz: Switch the [Image capture mode] to 30 fps mode or 15 fps mode.
– In the area where the power frequency is 50Hz: Switch the [Image capture mode] to 25 fps mode or 12.5 fps mode.


[Maximum shutter]
The maximum exposure time adjusts the maximum storage time of the sensor. The following values can be set.
Compact camera, Multi-directional camera, Corner cameras

If [Image capture mode] is in 30 fps or 15 fps mode:
[Maximum 1/10000s]/[Maximum 1/4000s]/[Maximum 1/2000s]/[Maximum 1/1000s]/[Maximum 1/5000s]/[Maximum 1/250s]/[Maximum 1/120s]/[Maximum 2/120s]/[Maximum 2/120s]/[Maximum 2/100s]/[Maximum 3/120s]/[Maximum 1/30s]/[Maximum 2/30s]/[Maximum 4/30s]/[Maximum 6/30s]/[Maximum 10/30s]/[Maximum 16/30s]


If [Image capture mode] is in 25 fps or 12.5 fps mode:
[maximum 1/10000 s]/[maximum 1/4000 s]/[maximum 1/2000 s]/[maximum 1/1000 s]/[maximum 1/500 s]/[maximum 1/250 s]/[maximum 1/100 s]/[maximum 2/100 s]/[maximum 3/100 s]/[maximum 1/25 s]/[maximum 1/25 s]/[maximum 2/25 s]/[maximum 4/25 s]/[maximum 6/25 s]/[maximum 10/25 s]/[maximum 16/25 s]



New X fixed camera

If [Image capture mode] is in 30 fps or 15 fps mode:
[Maximum 1/4000s]/[Maximum 1/2000s]/[Maximum 1/1000s]/[Maximum 1/5000s]/[Maximum 1/250s]/[Maximum 1/120s]/[Maximum 2/120s]/[Maximum 2/120s]/[Maximum 2/100s]/[Maximum 3/120s]/[Maximum 1/30s]/[Maximum 2/30s]/[Maximum 4/30s]/[Maximum 6/30s]/[Maximum 10/30s]/[Maximum 16/30s]


If [Image capture mode] is in 25 fps or 12.5 fps mode:
[maximum 1/4000 s]/[maximum 1/2000 s]/[maximum 1/1000 s]/[maximum 1/500 s]/[maximum 1/250 s]/[maximum 1/100 s]/[maximum 2/100 s]/[maximum 3/100 s]/[maximum 1/25 s]/[maximum 1/25 s]/[maximum 2/25 s]/[maximum 4/25 s]/[maximum 6/25 s]/[maximum 10/25 s]/[maximum 16/25 s]


[Important]

・When [Maximum shutter] is set to the following, the frame rate may decrease when the subject is dark.
If the [Image capture mode] is in 30 fps or 15 fps mode:
Value longer than [1/30s maximum] ([2/30s maximum]/[4/30s maximum]/[6/30s maximum]/[10/30s maximum]/[16/30s maximum])
If the [Image capture mode] is in 25 fps or 12.5 fps mode:
Value longer than [1/25s maximum] ([2/25s maximum]/[4/25s maximum]/[6/25s maximum]/[10/25s maximum]/[16/25s maximum])


・[MULTI] If the frame rate is lowered for one or more cameras due to the above, the frame rate is lowered for the other cameras whose exposure time has not changed.


[Note:]

・Refer to the catalogue specifications for the [Maximum shutter] that can be selected for the respective models.


・If [Super Dynamic] is set to [On], [Maximum 1/2000 s], [Maximum 1/4000 s], or [Maximum 1/10000 s] cannot be set.


・If [Maximum gain] is set to [0], the [Maximum shutter] setting is restricted as follows.
If [Image capture mode] is set to [Single source [4:3](30fps mode)]/[60fps mode]/[Dual sources [4:3](15fps mode)]:
[Maximum 2/30s] or more cannot be set.
If [Image capture mode] is set to [Single source [4:3](25fps mode)]/[50fps mode]/[Dual sources [4:3](12.5fps mode)]:
[Maximum 2/25s] or more cannot be set.


・If [Light control mode] is set to [Flickless (60Hz)], the duration cannot be set to less than [1/120s].


・If [Light control mode] is set to [Flickless (50Hz)], the duration cannot be set to less than [1/100s].


[Light control speed]
Adjust the speed of light intensity adjustment.
Move the slider bar in the [+] direction to increase the speed of light adjustment.
Moving the slider bar in the [-] direction slows the light intensity adjustment speed.
Press [Reset] to return to the default settings.
Switching between black and white
[D&N]
Select the mode for switching between black-and-white and color images.
Model with IR LED light

[Off]:It is always shot with color images.


[On(IR Light Off)]:The picture is always taken in black and white.


[On(IR Light On)]:The picture is always taken in black and white. This setting is used when near-infrared lighting is used at night.


[Auto1(IR Light Off)]:The color image and black-and-white image are automatically switched depending on the brightness (illumination) of the image.


[Auto2(IR Light On)]:The color image and black-and-white image are automatically switched depending on the brightness (illumination) of the image. This setting is used when near-infrared lighting is used at night.


[Auto3(SCC)]:Set this when you want to maintain a color image even when the light source is dark. The Super ChromaCompensation (SCC) function maintains the color image to low brightness.


IR LED lightNo-model

[Off]:It is always shot with color images.


[On]:The picture is always taken in black and white.


[Auto1(Normal)]:The color image and black-and-white image are automatically switched depending on the brightness (illumination) of the image.


[Auto2(IR Light)]:The color image and black-and-white image are automatically switched depending on the brightness (illumination) of the image. This setting is used when near-infrared lighting is used at night.


[Auto3(SCC)]:Set this when you want to maintain a color image even when the light source is dark. The Super Chroma Compensation (SCC) function maintains the color image to low illumination.


What is Super Chroma Compensation (SCC)?
This function enables the acquisition of color images that are faithful using a unique color correction technology even in an environment with low illumination that cannot capture images faithfully.
[Note:]

・Refer to the catalog specifications for the functions installed in each model.


・The Auto3 (Super Chroma Compensation) setting uses color correction techniques and may be displayed differently from the Full object depending on the ambient illumination condition.


・The operation sound may be heard when switching between black and white. However, this is not an error.


・Automatic color/black-and-white image switching may not work depending on the environment. In this case, use the scheduling function to change the color image/black-and-white image. How to set up is our technical information website<Control No. C0314>.


・[MULTI] If [D&N] is set to other than [Off], all cameras will be changed to the same setting.


・[Rapid PTZ][Auto3(SCC)] cannot be selected.


[Level]
Select the brightness (illumination) level to switch between color image and black-and-white image from the following. The following switching illuminance is the illuminance when [Super Dynamic] is [Off].
3:The brightness (brightness) of the camera is about 8 lx or less, and the image is switched to black and white.
2:The brightness (brightness) around the camera is about 4 lx or less, and the camera switches to a black-and-white image.
1:The brightness (brightness) of the camera is about 2 lx or less and the image is switched to black and white.
0:The brightness (brightness) around the camera is about 1 x or less, and the image is switched to black and white.
[Note:]

・The color image switching is about 5 to 8 times bright. It may vary depending on the environment.


・If [Maximum gain] is set low, it may not be easy to switch over depending on the environments.


[Dwell time]
Select the time before switching between color image and black-and-white image from the following.
[2s]/ [10s]/ [30s]/ [1min]
[IR LED light intensity]
Select IR light intensity from [High]/[Middle]/[Low]/[Off].
[Note:]

・Only IR-equipped models can be selected for [IR LED light intensity].


・Refer to the catalog specifications for the functions installed in each model.


・When [Black & white input] is selected in [Terminal 1] of the [Alarm] tab, [Off] can be selected.


・[MULTI] This setting is displayed only when [Camera selection] is set to [Common(Cam. 1-2)]. The settings for each camera are not available.


IR Light individual settings
You can enable or disable each IR Light individually.
For more information, please refer to our technical information website<Control No. C0109>.
[Note:]

・Refer to the catalog specifications for the functions installed in each model.


・[MULTI] [IR Light Individual Setting] can be selected only for the model with IR of the Multi-directional camera.


[Intensity control]
IR Light Sets ON/OFF whether the white and suppression function can be activated.
[Note:]

・Only IR-equipped models can be selected for [IR LED light intensity].


・Refer to the catalog specifications for the selectable switching method for each model.


・When [Intelligent Auto] is [On], [Intensity control] does not work.


・[MULTI] If [IR LED light intensity] is set to other than [Off], all cameras will be changed to the same setting.


White balance
[White balance]
Select the white balance adjustment method from the following.
Adjust the white color with the R volume (adjusting red color) or the B volume (adjusting blue).
[ATW1]:Set the automatic color temperature tracking mode. The camera continuously checks the color temperature of the light source and automatically adjusts the white balance. The operating range is about 2700 K to 6000 K.
[ATW2]:Set the automatic color temperature tracking mode under sodium lamp. The camera automatically adjusts the white balance under the sodium lamp. The operating range is from about 2000 K to 6000 K.
[AWC]:Set the automatic white balance control mode. Since the light source is fixed, it is suitable for shooting where the light source does not change. The operating range is from approximately 2000 K to 10000 K.
[Note:]

・Colors may not be reproducible faithfully if the following conditions are met: In such cases, set it to [AWC].
Most dark-colored subjects
The outgoing blue sky and the evening sun
Subject with too low illumination


・If [AWC] is selected, press [Set].


[Red gain]
Adjusts the red color of the image.
Move the slider bar in the [+] direction to darken the red color. When the slider bar is moved in the [-] direction, the red color becomes light. Press [Reset] to return to the default settings.
[Blue gain]
Adjust the blue color of the image.
Move the slider bar in the [+] direction to darken the blue color. When the slider bar is moved in the [-] direction, the blue color becomes light. Press [Reset] to return to the default settings.
[Mask area]
When the mask area is set, the set area can be masked and the white balance can be adjusted.
For details on how to set the mask area, refer to the following.
9.4.2 Set the mask area
[Note:]

・[MULTI] When [Common(Cam. 1-2)] is selected in [Camera selection], the mask area cannot be set. Set for each camera.


[Adjustment speed]
Adjust the white balance adjustment speed.
Move the slider bar in the [+] direction to increase the white balance adjustment speed. Move the slider bar in the [-] direction to slow the white balance adjustment speed. Press [Reset] to return to the default settings.

Intelligent auto
[Intelligent Auto]
Set ON/OFF whether the intelligent auto function is enabled or not.
Intelligent Auto identifies scenes (backlights, outdoors, night scenes, etc.), faces, moving objects, etc., and automatically squeezes the camera to adjust the gain, shutter speed, and contrast to make it easier to see faces and moving objects.
What is Intelligent Auto?
This function enables the camera to adjust the gain, shutter speed, and contrast by identifying scenes (backlight, outdoors, night scenes, etc.), faces of people, and moving objects, thereby making it easier to see faces and moving objects.
[Face priority level (Brightness)]
Adjust the face priority level when activating intelligent auto.
Move the slider bar in the [+] direction to make the face more visible.
Move the slider bar in the [-] direction to adjust the entire image in a balanced manner.
Press [Reset] to return to the default settings.
[Motion priority level (Shutter)]
Adjust the motion priority level when activating intelligent auto.
Moving the slider bar in the [+] direction makes moving subjects less prone to blurring but increases dark subject noise.
Moving the slider bar in the [-] direction tends to blur the moving subject but reduces the dark subject noise. Press [Reset] to return to the default settings.
[Note:]

・Flicker caused by fluorescent lamp may occur when intelligent auto is activated.
In this case, set one of the following settings.
Adjust the [Motion priority level] slider bar to [-].
Change [Light control mode] to [Indoor scene(50Hz)] or [Indoor scene(60Hz)].


・When intelligent auto is activated, the brightness of the entire image may change due to changes in some subjects. In such cases, adjust the [Face priority level] slider bar to [-].


・[MULTI4] [MULTI3] When intelligent auto is activated, the maximum frame rate is limited to 7.5 fps in 15 fps mode and 6.25 fps in 12.5 fps mode regardless of the frame rate.


・[New X Fixed-8MP][New X Fixed-6MP][New X Fixed-5MP]If [Image capture mode] is set to [60fps Mode] or [50fps Mode], [Intelligent Auto] cannot be used.


Advanced settings
[Auto contrast adjust]
Use [On] or [Off] to set the auto-contrast adjust function.
[On]:Activate the automatic contrast adjustment function.
[Off]:Stops the automatic contrast adjustment function.
[Note:]

・If [Intelligent Auto] is set to [On], this item cannot be set.


・[New X Fixed-8MP][New X Fixed-6MP][New X Fixed-5MP]If [Image capture mode] is set to [60fps Mode] or [50fps Mode], [Auto contrast adjust] cannot be used.


[Contrast level]
Adjust the contrast intensity.
Move the slider bar in the [+] direction to increase the contrast of the image.
Move the slider bar in the [-] direction to reduce the image contrast.
Press [Reset] to return to the default settings.
[Note:]

・If [Fog compensation] is set to [On], this item cannot be set.


[Adaptive black stretch]
Adjust the brightness of the dark area of the image.
Move the slider bar in the [+] direction to brighten the dark area of the image.
Move the slider bar in the [-] direction to darken the dark area of the image.
Press [Reset] to return to the default settings.
[Important]

・The [Adaptive black stretch] setting may cause darker areas to become more noisy, and darker or brighter areas may be near the border between darker and brighter areas than other darker areas.


[Note:]

・If [Fog compensation] is set to [On], this item cannot be set.


[Adaptive highlight stretch]
Adjust the brightness of the bright area of the image.
Moving the slider bar in the [+] direction will increase the contrast between the light and dark areas of the image.
Move the slider bar in the [-] direction to reduce the contrast between the light and dark areas of the image.
Press [Reset] to return to the default settings.
[Note:]

・If [Fog compensation] is set to [On], this item cannot be set.


[Fog compensation]
On/Off sets whether the fog correction function is enabled.
If [Intelligent Auto] is set to [On] or [Auto contrast adjust] is set to [On], it cannot be set. With the fog correction function, digital image processing can be used to correct images easily when they are blurred, such as when a fog occurs.
On:Enables the fog correction function.
Off:Stops the fog correction function.
[Note:]

・When [Fog compensation] is set to [On], [Contrast level], [Adaptive black stretch], and [Adaptive highlight stretch] cannot be set.


[Level]
Adjust the fog correction level.
Moving the slider bar in the [+] direction increases the correction level, while moving the slider bar in the [-] direction decreases the correction level. Press [Reset] to return to the default settings.
Pedestal level
Move the slider bar to adjust the black level of the image.
Moving the slider bar in the [+] direction brightens the image. Move the slider bar in the [-] direction to darken the image. Press [Reset] to return to the default settings.
Scene registration
[Scene file]
The combination of the set items can be saved as a scene file. Select the scene file here.
You can set the saved scene file on the schedule page. If the shooting environment changes greatly depending on the time, you can record the image with a combination of settings appropriate to the environment by registering it in the schedule.
15 [Schedule] for scheduling
[Scene file title]
You can change the scene file name (up to 10 characters) to be displayed in [Scene file]. Only the file names displayed in [1:], [2:], [3:], [4:] can be changed.
Characters that cannot be entered:Half-pitch symbol " & ¥
[Load] buttons
The set data selected in [Scene file] is loaded and reflected in the current image.
[Register] buttons
This feature registers combinations of currently displayed image quality-adjusted settings in a scene file displayed on the [Scene file].
This section explains how to adjust the light intensity by masking a portion of the screen.
To configure the mask area, set [Super Dynamic] to [Off].
1
Displays the image quality adjustment setting screen.
9.4 [Image quality] to set the image quality
2
Click + to the left of the [Super Dynamic] to view the Detailed Super Dynamics menu.
3
Clicking on the [Start] buttons in the [Mask area] displays the boundaries and divides the images displayed on the [Image quality] tabs into 48 (8×6).
4
Click the split area to be masked to set the frame you clicked to the mask area and turn white. To release the mask, click the mask area again.
5
Once the mask area has been set, clicking [Stop] will clear the frame from the images on the [Image quality] tab.
[Important]

・If you change the [Image capture mode] of the [Image] tabs after you configure the mask area, the mask area may be misaligned. Be sure to check the mask area settings again.


・If you set EX optical zoom or HD EX optical zoom after setting the mask area, the mask area may be misaligned. Be sure to check the mask area settings again.


[Note:]

・To cancel all mask areas, press [Reset].


[Note:]

・[MULTI] This function cannot be adjusted when [Image capture mode] is in Quad/Dual mode.


To Advanced Settings in [Extra zoom] on the [Image quality] tabs of video pages>>Click the [Button]. ([Image quality] for setting image quality adjustment, zoom/focus, privacy zone, VIQS, and lens distortion compensation)
9.4 [Image quality] to set the image quality
Use EX Zoom to adjust the angle of view of the image.
[Note:]

・[MULTI] The camera to adjust the angle of view can be selected.


・Adjust the zoom factor in the [Wide angle] direction.


・Zoom (magnification) 1.0 times.


・Adjust the zoom factor in the [Telescope] direction.


[Note:]

・The maximum magnification of the EX zoom depends on the model and the [Image capture mode] you are configuring.


・Refer to the catalog specifications for the maximum magnification of each model.


[Important]

・The extra zoom function may not be activated on the appropriate position if the setting for the function is performed after the settings for the VIQS area, privacy zone, VMD area, and SCD area. Therefore, configure each area's settings after configuring the extra zoom settings.
9.4.7 Set up VIQS
9.4.6 Setting the privacy zone (Privacy zone setting screen)
12.5 [VMD area] for setting motion detection
12.7 [SCD area] to set up undesired detection


・Set the mask area to 1.0 times the zoom factor. After the EX zoom is set, the mask position is specified when the zoom (magnification) is 1.0 times.
9.4.2 Set the mask area


To Advanced Settings in [Extra optical zoom] on the [Image quality] tabs of video pages>>Click the [Button]. ([Image quality] for setting image quality adjustment, zoom/focus, privacy zone, VIQS, and lens distortion compensation)
9.4 [Image quality] to set the image quality
Use Ex optical zoom to adjust the angle of view of the image.

・Adjust the zoom factor in the [Wide angle] direction.


・Zoom (magnification) 1.0 times.


・Adjust the zoom factor in the [Telescope] direction.


[Note:]

・The maximum magnification of the Ex optical zoom depends on the model and the [Image capture mode] you are configuring.


・Refer to the catalog specifications for the maximum magnification of each model.


[Important]

・The EX optical zoom function may not be activated on the appropriate position if the setting for the function is performed after the settings for the VIQS area, privacy zone, VMD area, and SCD area. Therefore, configure each area's settings after configuring the EX optical zoom settings.
9.4.7 Set up VIQS
9.4.6 Setting the privacy zone (Privacy zone setting screen)
12.5 [VMD area] for setting motion detection
12.7 [SCD area] to set up undesired detection


・Set the mask area to 1.0 times the zoom factor. After the EX optical zoom is set, the mask position is specified when the zoom (magnification) is 1.0 times.
9.4.2 Set the mask area


[Note:]

・This function cannot be adjusted when [Image capture mode] is in dual-mode.


To [Advanced Settings] in [Zoom/Focus Adjustment] of the [Image quality] tabs on the video pages>>Click the [Button]. ([Image quality] for setting image quality adjustment, zoom/focus, privacy zone, VIQS, and lens distortion compensation)
9.4 [Image quality] to set the image quality
Use Zoom and EX optical zoom to adjust the angle of view of the displayed image.
Adjust the focus by moving the lens focus to the optimal position. It can be adjusted manually or automatically.
[Note:]

・[MULTI] The camera to adjust the angle of view can be selected.


[Zoom ratio designation]
Adjust the zoom and focus simultaneously.
Press the slider bar to zoom in or out the angle adjustment frame in the image.
When you adjust the zoom (magnification) in the "telephoto" direction, only the image adjustment frame is reduced and you can specify the zoom (magnification) while checking the angle of view after the zoom is executed.
When the zoom (magnification) is adjusted in the "Wide angle" direction, the image itself is reduced or the frame for the zoom angle adjustment is enlarged. You can specify the zoom (magnification) while checking the image size after the zoom is executed.
Adjust the angle of view adjustment frame, and click [Execute] to zoom. Then, automatically adjust the focus to the object in the center of the window using the auto focus function.
[Note:]

・The maximum magnification of the EX zoom depends on the model and the [Image capture mode] you are configuring.


・Refer to the catalog specifications for the maximum magnification of each model.


・In the [Manual zoom adjustment]Buttons,When you press buttons, [Zoom ratio designation] cannot be operated. To perform [Zoom ratio designation], click the "Read" button or click the X1 button on the [Manual zoom adjustment].


・[New X Fixed]If [Stabilizer] is set to [On], the maximum zoom factor is limited.


[Important]

・When EX optical zoom is set with the VIQS area, privacy zone, operation detection area, undesired detection area, and mask area set, the position is misaligned. Therefore, set the EX optical zoom and then set each area.


9.4.7 Set up VIQS
9.4.6 Setting the privacy zone (Privacy zone setting screen)
12.5 [VMD area] for setting motion detection
12.7 [SCD area] to set up undesired detection
9.4.2 Set the mask area
[Manual zoom adjustment]
Adjust the zoom manually.
Adjust the zoom factor to 1.0 times in the [Wide Angle] direction.
Zoom (magnification) is 1.0 times.
: Adjust the zoom factor in the [Telescope] direction.
[Manual focus adjustment]
Adjust the focus manually.
[Near]: Adjust the focus to the [Near].
[Reset] returns focus (focus) to its default settings.
[Far]: Adjust the focus to the [Far].
[Note:]

・One-click on the [Near] or [Far] buttons may appear to have no change in focus due to trace adjustments. If you want to move the focus position large, press and hold the button for a long time.


・[New X Fixed]If [Stabilizer] is set to [On], the maximum zoom factor is limited.


[Focus area setting]
When auto focus is executed, you can specify the object in the frame where you want to adjust the focus.
If not, adjust the focus to the object in the center area of the window.
[Display]: Displays the auto focus frame on the setup window. The default setting is displayed in the center area of the screen. Drag the mouse on the image and specify the area where you want to adjust the focus. When you are finished, press [Register].
When the [Display] button is clicked, the [Reset] and [Register] buttons are displayed.
[Reset]: Returns the frame setting to the default position.
[Register]: Saves the set frame. Clicking to automatically adjust focus to the object in the specified area
I do.
[Note:]

・If you set the focus frame and then change the [Rotate images][Stabilizer] on the [Basic] tab or [Image capture mode] on the [Image] tab, the focus frame may be misaligned. Be sure to check the focus frame settings again.


[Auto focus]
When [Execute] is clicked, the auto focus function is activated to automatically adjust the focus to the object in the center of the window.
[Important]

・If the [Image capture mode] is [Single source [4:3](30fps mode)], it may take a lot of time for auto focus to be completed if auto focus is executed while the slow shutter is running at night while [Maximum shutter] is set to longer than [1/30s].


・If the [Image capture mode] is [Single source [4:3](25fps mode)], it may take a lot of time for auto focus to be completed if auto focus is executed while the slow shutter is running at night while [Maximum shutter] is set to longer than [1/25s max.].


・The focus may not be adjusted automatically in the following locations or object. In this case, adjust the focus manually.
Be a big move
Large variation in illumination
Low illuminance
Be too bright or too reflective
Over the window
Dome covers are prone to contamination.
White walls are less dark.
Flicker fiercely


・When the image is switched from color to black and white in the near infrared region, the focus may shift due to the optical characteristics. If [Focusing at Day & Night switching] is set to [Auto] or [Preset], the camera can focus automatically (it does not support the lighting change after the focus operation is completed).


[Focusing at Day & Night switching]
Select the focus adjustment method when switching between color image and black-and-white image from the following.

For details, refer to our technical information website <Control No. C0315>.

[Auto]:The focus is automatically adjusted when the color/black-and-white settings are changed from the focus-adjusted image. When the original color/black/white status is changed, the focus position is returned to the last one. If the image cannot be adjusted with a black-and-white image, the image may be re-adjusted with a color image and then switched to a black-and-white image.
[Preset]:When switching between color image and black-and-white image, the preset is moved to the specified focus position. In the preset position, the color image or black-and-white image automatically stores the focus position set last.
[Fix]:After adjusting the focus automatically or manually, fix the position.
[Important]

・If the focus cannot be adjusted automatically when switching between color and black and white images in the [Auto] setting, set it to [Preset] or [Fix] and adjust the focus manually.


[Grid display]
You can switch on/off the grid view that can be used to adjust the position of the machine when using Extension software. For adjusted sizes for each Extension software, please refer to our Technical Information website<Control No.: C0320>.
[Close] buttons
Close the Zoom/Focus dialog box.
In the Video/Audio [Image quality] tabs to [Privacy zone] Advanced Settings>>Click the [Button].
9.4 [Image quality] to set the image quality
If there are areas in the shooting location (image) that you do not want to display, do not display those areas as privacy zones.
[Note:]

・Refer to the catalog specifications for the number of privacy zones that can be set for each model.


・[PTZ] The Privacy Zone function does not work during initial operation or position refresh immediately after the power supply is turned on.


・[PTZ] Depending on the orientation of the camera (especially the tilt angle of 45° to 90°) or the magnification factor, you may see where you want to hide. Be sure to check after setting.


・[PTZ] Reset the Privacy Zone when you change the method of fixing the camera.


The privacy zone function of each camera is described below.
New X Fixed Cameras
Compact Dome cameras, Corner cameras
[Area]
This is set as the privacy zone by specifying four vertices on the image. Each zone can also be set in overlap. The zones are set in order from Area 1.
[Note:]

・The privacy zone should be wider than the hidden object.


[Status]
Use [On]/[Off] to set whether the privacy zone is displayed.
[On]:Displays the privacy zone.
[Off]:Privacy zone is not displayed.
[Collar]
You can select the color of the Privacy Zone to be displayed in the video area from the following.
[Gray]/[Red]/[Blue]/[Green]/[White]/[Black]
[Note:]

・[Color] can be set when [Privacy zone display format] is set to [Block] in the basic settings window.


[Intensity of mosaic]
You can select how to mosaic the Privacy Zone to be displayed in the video area.
[High]/[Middle]/[Low]
[Note:]

・[Intensity of mosaic] can be set when [Privacy zone display format] is set to [Blurring] in the basic settings window.


[Delete] buttons
Click the button on the area to delete the button to delete the zone.
[Close] buttons
Close the Privacy Zone Settings window.
[Important]

・If you configure a privacy zone and then change the [Image capture mode] and [Basic] tab [Image rotation] on the [Image] tab, the privacy zone may be misaligned. Be sure to check the privacy zone settings again.


・Setting the privacy zone and then setting the EX zoom may cause the privacy zone to be misaligned. Be sure to check the privacy zone settings again.


・If the privacy zone is set when lens distortion compensation is enabled, it may be misaligned. In such a case, return the lens distortion compensation to [0] and set the privacy zone. Then, set the lens distortion compensation again.


・[New X Fixed]If you configure the Privacy Zone area with a Image capture size of 1920x1080 or less, the Privacy Zone may be offset.Be sure to check the privacy zone settings again.


PTZ cameras
[Privacy zone]
Select the display format of the privacy zone from the following.
[On]:Display in gray
[Off]:Not displayed.
[Zone select]
Click [▼] on the [Zone No] and select the number of zones you want to set.
The [*] mark to the right of the zone number indicates that a privacy zone has already been set.
When you drag the desired range with the mouse, it is set as the privacy zone.
Once the position has been determined, press [Set].
To delete a registered zone, specify the zone number and press [Delete].
To cancel setting or deletion, press [Cancel].
[Note:]

・The privacy zone should be set broadly for objects that you want to hide.
It is recommended to set the zone between 1 and 3 times the zoom magnification to increase the zone accuracy on the wide angle side.


[Privacy zone:Min. Zoom]
Use [On] or [Off] to toggle the smallest zoom in zones.
[On]:The current zoom position is saved.
[Disable]:The zoom position is saved as X1 times. The privacy zone is always displayed regardless of the zoom position.
[Note:]

・If enabled, the privacy zone will not be displayed if you move to a magnification lower than the set zoom magnification.


[Zoom] buttons
:Adjust the zoom factor in the [Telescope] direction.
:Zoom (magnification) 1.0 times.
:Adjust the zoom factor in the [Wide angle] direction.
[Focus] buttons
[Auto]:Automatically adjust focus.
[Near]:Adjust the focus (focus) to [Near].
[Far]:Adjust the focus (focus) to [Far].
Control pad/button
Left-click the pads and buttons to adjust the horizontal and vertical position of the image (pan tilt).
The faster the camera operates, the faster the outside of the pad is clicked.
You can also drag and adjust the mouse. Zoom and focus by right-clicking.
Clicking on the upper half of the pad in the upper and lower directions will zoom in the telephoto, and clicking on the lower half will zoom in the wide angle. Clicking on the left half in the left and right directions will bring the focus (focus) close to you, and clicking on the right half will bring it far away. You can also adjust the zoom by using the mouse wheel.
[Brightness] buttons
It can be adjusted from 0 to 255. Click the [Light (+)] button to brighten the image. Click the [Black (-)] button to darken the image. Press [Normal] to return to the default settings.
Move button
Select the preset position from the pull-down menu and click the [Move] button to move the camera's orientation to the preset position registered beforehand. [H] next to the number indicates the home position. Select [HomePosition] to move the orientation of the camera to the home position.
10.2.1 Set the preset position (preset position setting screen)
10.1 [Cam. Function] for setting the operation of cameras
If [Preset ID (0 – 9,A – Z)] is registered, the position name is displayed next to the number.
[Close] buttons
Click this button to close the Privacy Zone Settings window.
Multi-directional camera
[Camera selection]
Select the camera to set the privacy zone from each camera.
[Note:]

・When [Image capture mode] is in Quad/Dual mode, the camera cannot be selected.


[Area]
This is set as the privacy zone by specifying four vertices on the image. Each zone can also be set in overlap. The zones are set in order from Area 1.
[Note:]

・The privacy zone should be wider than the hidden object.


・When [Image capture mode] is in Quad/Dual mode, any four points across the cameras cannot be specified for the area.


[Status]
Use [On]/[Off] to set whether the privacy zone is displayed.
[On]:Displays the privacy zone.
[Off]:Privacy zone is not displayed.
[Delete] buttons
Click the button on the area to delete the button to delete the zone.
[Close] buttons
Close the Privacy Zone Settings window.
[Important]

・If you configure a privacy zone and then change the [Image capture mode] and [Basic] tab [Image rotation] [Stabilizer] on the [Image] tab, the privacy zone may be misaligned. Be sure to check the privacy zone settings again.


・Setting the privacy zone and then setting the EX zoom may cause the privacy zone to be misaligned. Be sure to check the privacy zone settings again.


・If the privacy zone is set when lens distortion compensation is enabled, it may be misaligned. In such a case, return the lens distortion compensation to [0] and set the privacy zone. Then, set the lens distortion compensation again.


To Advanced Settings on the [Image quality] tabs of Video/Audio pages [VIQS]>>Click the [Button].
9.4 [Image quality] to set the image quality
What is VIQS?
Abbreviation for Variable Image Quality on Specified Area. This function enables you to change the image quality in the specified area.
Image quality in the range specified in the shooting location (image) can be made high quality for easy viewing. Image quality outside the specified range is low and image data size can be suppressed.
[Note:]

・VIQS covers only H.265 (or H.264) images.


・Up to eight VIQS areas can be set.


・After [Stream] is set to [On], press [Execute] to view the images after VIQS is set.
You can also view the H.265 (or H.264) image on a live image page.


・The VIQS function cannot be used in the following cases.
-When [Stream(1)] [Smart VIQS] is set to [On(High)] or [On(Low)]
When-[Smart P-picture control] is set to [On]


The VIQS function of each camera is described below.
Fixed cameras
[Area]
When the VIQS area is selected in the image, it is set from Area 1.
[Status]
Set the VIQS area with [On] and [Off].
[On]:Set the VIQS area.
[Off]:Do not configure the VIQS area.
[Delete] buttons
Click the area button to delete the area frame.
[Level]
Sets the level difference between the quality in the specified range and the quality outside the specified range. The larger the level difference, the lower the image quality outside the specified range and the smaller the image data size.
[0:Minimum]/1/2/3/4/[5:standard]/6/7/8/[9:maximum]
Stream selection
Use [On]/[Off] to specify whether the VIQS function is enabled for images delivered to streams.
The [Execute] buttons allow you to view images of individual streams.
[Important]

・If you set the VIQS setting to [On] and then change the [Image capture mode] and [Basic] tab [Image rotation][Stabilizer] on the [Image] tab of the video and audio pages, the VIQS area may be misaligned. Be sure to reconfirm the VIQS settings.


[Note:]

・Refer to the following procedure for setting the VIQS area.
9.4.8 Set up the VIQS area


・If the [Stream transmission] of the relevant stream is set to [Off], you cannot press the [Execute] buttons for selecting the stream.


PTZ camera
Select the position for which you want to set the VIQS area and press [Start] to open the VIQS area setting window for the selected position.
You can specify the VIQS area on the displayed setting screen.
VIQS area setting
[Select a preset position]
Select the preset position number for which you want to configure the VIQS area, and then press [Start] to configure the VIQS area.
Select [except the preset positions] to set the VIQS area other than the preset position.
[Close] buttons
Click to close the VIQS Settings window.
[Area]
When the VIQS area is selected in the image, it is set from Area 1.
[Center] button
When clicked, the center is selected as the VIQS area and set to the [1(White)] of the [Area].
[Status]
Set the VIQS area with [On] and [Off].
[On]:Set the VIQS area.
[Off]:Do not configure the VIQS area.
[Delete] buttons
Click the area button to delete the area frame.
[Level]
Sets the level difference between the quality in the specified range and the quality outside the specified range. The larger the level difference, the lower the image quality outside the specified range and the smaller the image data size.
[0:Minimum]/1/2/3/4/[5:standard]/6/7/8/[9:maximum]
Stream selection
Use [On]/[Off] to specify whether the VIQS function is enabled for images delivered to streams.
The [Execute] buttons allow you to view images of individual streams.
[Important]

・If you set the VIQS setting to [On] and then change the [Image capture mode] and [Basic] tab [Image rotation] on the [Image] tab of the video and audio pages, the VIQS area may be misaligned. Be sure to reconfirm the VIQS settings.


[Note:]

・Refer to the following procedure for setting the VIQS area.
9.4.8 Set up the VIQS area


・If the [Stream transmission] of the relevant stream is set to [Off], you cannot press the [Execute] buttons for selecting the stream.


Multi-directional camera
[Camera selection]
Select the camera to set the VIQS area from each camera.
[Note:]

・When [Image capture mode] is in Quad/Dual mode, the camera cannot be selected.


[Area]
When the VIQS area is selected in the image, it is set from Area 1.
[Status]
Set the VIQS area with [On] and [Off].
[On]:Set the VIQS area.
[Off]:Do not configure the VIQS area.
[Delete]
Click the button of the area to delete to delete the area frame.
[Level]
Sets the level difference between the quality in the specified range and the quality outside the specified range. The larger the level difference, the lower the image quality outside the specified range and the smaller the image data size.
[0:Minimum]/1/2/3/4/[5:standard]/6/7/8/[9:maximum]
Stream selection
Use [On]/[Off] to specify whether the VIQS function is enabled for images delivered to streams.
The [Execute] buttons allow you to view images of individual streams.
[Important]

・If you turn on the VIQS setting and then change the [Image capture mode] and [Basic] tab [Image rotation] on the [Image] tab of the video and audio pages, the VIQS area may be misaligned. Be sure to check the VIQS settings again.


[Note:]

・Refer to the following procedure for setting the VIQS area.
9.4.8 Set up the VIQS area


・If the [Stream transmission] of the relevant stream is set to [Off], you cannot press the [Execute] buttons for selecting the stream.


Set the VIQS area as follows.
1
Drag the mouse on the image and specify the area. You can specify up to 8 areas.
The specified location is set to Area [1(White)], and a frame is displayed.
Areas are set from the first to the first area number. The color next to the area number indicates the corresponding color of the frame.
2
Sets the level difference between the quality in the specified range and the quality outside the specified range. The larger the level difference, the lower the image quality outside the specified range and the smaller the image data size.
3
On/Off selects whether to enable the VIQS function on the delivered image of each stream.
4
Press [Set].
The settings are reflected on the computer. To delete the setting area, click [Delete] in the area to delete.
5
Press [Execute].
The streams with the [Execute] buttons are displayed. The current output bit rate can be checked when another window opens for approximately 3 seconds.
[Important]

・If you do not press the [Set] buttons, the settings will not be confirmed.


・Visual image after VIQS setting can be confirmed by displaying the H.265 (or H.264) image on the live image page or by pressing [Execute] on the [Stream].


・The current output bit rate varies depending on the subject. Check the actual subject during operation.


・The larger the specified range, the larger the output bit rate. Check the current output bit rate and determine the size of the area.


To Advanced Settings on the [Image quality] tabs of Video/Audio pages [Lens distortion compensation]>>Click the [Button].
9.4 [Image quality] to set the image quality
You can use lens distortion correction to correct the distortion.
The correction amount can be adjusted.
The degree of distortion compensation depends on the zoom factor. Adjust the image angle with the zoom setting and then set the lens distortion compensation.
[Camera selection]
Select the camera to adjust the lens distortion compensation from each camera.
[Note:]

・[MULTI] Only Multi-directional cameras can be selected for [Camera selection].


・[MULTI] When [Image capture mode] is in Quad/Dual mode, the camera cannot be selected.


[Lens distortion compensation]
You can switch the lens distortion compensation ON/OFF.
Move the slider bar in the [+] direction or [-] direction to adjust the image distortion.
Press [Reset] to return to the default settings.
[Note:]

・When EX optical zoom is used, lens distortion compensation does not work.


・When lens distortion compensation is set to ON, all cameras are set to ON. Turning on lens distortion compensation may lower the frame rate.


・[New X Fixed]If [Shake] is set to [On], [Lens distortion compensation] cannot be used.


・[New X Fixed]If you set [Privacy Zone Display Format] to [Blurring], you cannot use [Lens distortion compensation].


Click on the [Audio] tabs of the video and audio pages. Refer to the following how to display and operate the Advanced menu.
5.1 How to display
5.2 How to operate
Here, the settings related to sound are made.
[Note:]

・Images and sound are not synchronized. Therefore, there may be a slight deviation between the image and sound.


・Depending on the network environment, audio may be interrupted.


Voice input
[Mic select]
Select the microphone to use when receiving audio data.
[Internal]:Use the camera's built-in microphone.
[External]:Use the audio input from the microphone/line input jack.
[Mic input volume]
Set the volume of sound input to the computer. This setting is reflected in the volume of sound (listening) on the computer and the volume at [Audio recording].
[Mic strength]/[Mic in progress]/[Microphone weak]:Set the volume when the sound is entered into the camera by microphone.
[Line Strength]/[In Line]/[Line Weak]:Set the volume when the sound is inputted to the camera line.
[Note:]

・When [Mic select] is set to [Internal], the Line High, Line Medium, and Line Low cannot be selected.


[AGC (audio)]
The earpiece sound is automatically amplified and adjusted to the appropriate volume. Select the degree of amplification from High/Middle/Low. When set to [High], it is easier to hear a small sound, but it may be heard as a noise. If you are concerned about noise, set it to [Middle] or [Low]. This setting is linked to the [Audio recording] volume.
[Max bit rate]
Set the bit rate of sound compression.
[G.726]:16kbps/ 32kbps
[G.711] : 64 kbps (cannot be changed)
[AAC‑LC]:64kbps/ 96kbps/ 128kbps
Voice delivery
[Audio transmission mode]
Set the communication mode for sending/receiving voice data between the computer and PC from the following.
[Off]:Audio data is not transmitted or received between the computer and the PC.
[Mic input]:The PC receives audio data from the computer. You can hear sound together with images on a PC. Images and sound are not synchronized.
[Audio output]:The audio data from the PC is transmitted to the computer. Audio can be played through a speaker connected to the computer.
[Interactive(Half-duplex)]:You can make both listening and outgoing calls. However, audio cannot be sent/received simultaneously.
[Interactive(Full-duplex)]:You can both listen and talk at the same time.
[Note:]

・The howling may occur depending on the operating conditions. In this case, do not allow the sound output from the PC to enter the microphone of the PC.


・[Audio recording] cannot be used when [Audio transmission mode] is set to [Interactive(Half-duplex)].


・When using live picture pages, use HTTPS to access live picture pages.


[Mic input interval (Camera to PC)]
Select the voice reception interval from the following.
[20ms]/ [40ms]/ [80ms]/ [160ms]
[Note:]

・The shorter the call interval, the shorter the delay time. Increasing the value lengthens the delay time but reduces speech interruption. Change the settings depending on your network environment.


・If [AAC-LC] is selected in [Audio input encoding format], [Mic input interval (Camera to PC)] cannot be selected.


[Audio output volume (PC to Camera)]
Sets the volume to which the sound from the PC is played from the computer.
[High]/[Middle]/[Low]
[Audio output interval (PC to Camera)]
Select the voice transmission interval from the following.
[160ms]/ [320ms]/ [640ms]/ [1280ms]
[Note:]

・The smaller the call interval, the shorter the delay time. Increasing the value lengthens the delay time but reduces speech interruption. Change the settings depending on your network environment, the performance of your PC, and the usage status of applications other than web browsers.


・When multiple users are accessing the computer, the sound may be temporarily interrupted or the noise may be output. Increasing the transmission interval can reduce speech interruptions and noise.


・Sound may not be output depending on your network environment and settings.


[Audio output duration]
You set the maximum time for one call.
[1min]/ [2min]/ [3min]/ [5min]/ [10min]/ [20min]/ [30min]/ [1h]
[Note:]

・The call stops after the set time after the start of the call. If you want to make another call, click the call button.


[Audio output port (PC to Camera)]
Enter the destination port number (the port number on the camera to send voice to the computer).
Configurable port number: 1024 to 50000 (even number only)
[Note:]

・The Destination port number entered in [Audio output port (PC to Camera)] is used only if [Transmission type] is set to [Unicast port (MANUAL)]. If [Stream transmission] has selected [Off] or [Transmission type] [Unicast port (AUTO)] or [Multicast], you do not need to enter the Destination port number.


Live image pages
[Audio input encoding format]
Select the compression method of earpiece voice from G.726/G.711/AAC-LC.
[Note:]

・Only AAC-LC can be accessed from a Web browser.


・G.711 can be selected only when [Audio transmission mode] is [Mic input].


・G.726 is always applied to the compression method for voice transmission.


[Audio volume control mode]
Select how to use the volume cursor of the earpiece button on the live picture page.
Adjust the PC volume:You change the volume of the PC that is opening the Live Picture page.
Manipulate camera audio input volume:You change the earpiece volume of the camera.