8[Basic] for basic setup of the machine

Basic pages set the camera title, date and time, SD Memory Card, and overlay. The basic pages consist of the [Basic], [SD memory card], and [Overlay image] tabs.

[Note:]

・The layout of each setting item varies depending on the model.

・Refer to the catalog specifications for the functions installed in each model.

8.1[Basic] to perform basic settings

On the Basic Page, press the [Basic] tab. Refer to the following how to display and operate the Advanced menu.
→5.1　How to display
→5.2　How to operate
The camera title, date, and time are set here.

[Note:]

・The layout of each setting item varies depending on the model.

・Refer to the catalog specifications for the functions installed in each model.

[Menu language]
Select the first language that appears when you access the camera from the list below.
[Auto]/[English]/[Japanese]/[Italian]/[French]/[German]/[Spanish]/[Chinese]/[Russian]/[Portuguese]
[Auto]:The language used by the browser is automatically selected. If the machine does not support the language, the English language is selected.

[Camera title]
Enter the name of the computer. After input, press [Set] to display the entered name in the camera title.
Number of characters that can be entered:0 to 20 characters
Characters that cannot be entered:Half-pitch symbol " &

[Date/time]
Enter the current date and time. If you selected [12h] in [Time display format], select [AM] or [PM].
When [Set PC time to the camera] is checked and [Set] is clicked, the date and time of the computer are obtained and set to the computer.
Settable range:Jan/01/2013 00:00:00～Dec/31/2035 23:59:59

[Important]

・If you need to set the time more accurately in system operation, use the NTP server.
→14.2.3　Set up an NTP server

[Date/time display]
Use [On] or [Off] to set whether the date and time are displayed on the images. When the date and time are not displayed, set it to [Off].

[Note:]

・[MULTI] [Date/time display] can be set individually by the cameras.

[Time display format]
Select the time display method from 24h/12h. Enter the [Date/time] according to this setting.

[Date/time display format]
Select the date display format. If [Date/time] is set to [13:10:00 on April 1, 2022], the display formats are as follows.
DD/MM/YYYY: 01/04/2022 13:10:00
MM/DD/YYYY: 04/01/2022 13:10:00
DD/Mmm/YYYY: 01/Apr/2022 13:10:00
YYYY/MM/DD: 2022/04/01 13:10:00
Mmm/DD/YYYY: Apr/01/2022 13:10:00

[Date/time position]
Select the position where the date and time are displayed on the image.
[Upper left]: Displayed in the upper left corner of the window.
[Lower left]: Displayed in the lower left corner of the window.
[Upper center]: Displayed in the center of the window.
[Lower center]: Displayed at the bottom center of the window.
[Upper right] is displayed in the upper right corner of the window.
[Lower right]: Displayed in the lower right corner of the window.

[Note:]

・[MULTI] [Date/time position] can be set individually by the cameras.

[NTP]
Clicking [NTP >>] displays the [Advanced] tabs for the network pages.
→14.2.3　Set up an NTP server

[Time zone]
Select the time zone for the camera area.

[Summer time(daylight saving)]
Use [In], [Out] and [Auto] to specify whether to use Daylight Saving Time. Set in the region where Daylight Saving Time is used.
[In]:Set the time to Daylight Saving Time. [*] is displayed in the time display.
[Out]:Reset Daylight Saving Time.
[Auto]:Switches to Daylight Saving Time according to the start date and time and end date settings (month, week, day of week, time).

[Start time & date] [End time & date]
When [Auto] is selected in [Summer time(daylight saving)] Setting, the start date and time of Daylight Saving Time and the end date and time of Daylight Saving Time are set in Month, Week, Day of Week, and Time.

[Display on screen]
To make individual settings, select the camera and set the settings.
Select the camera to set the following items individually for each camera.
[Date/time display]
[Date/time position]
[Camera title on screen display]
[Camera title position]

[Note:]

・[MULTI] When Image capture mode is in Quad/Dual mode, Camera 1 is automatically selected and other cameras cannot be selected.

・[MULTI] Select Camera 1 in [Display on screen] and select [Reflect all settings for Camera 1] to set the settings you changed for Camera 1 to all other cameras.

[Camera title on screen display]
Use [On]/[Off] to set whether the strings are displayed on the images.
When set to [On], the character strings entered in [Camera title on screen] are displayed at the position selected in [Position].

[Note:]

・[MULTI] [Camera title on screen display] can be set individually by the cameras.

[Camera title on screen]
Enter a character string to be displayed in the image.
Number of characters that can be entered:0 to 40 characters
Input Characters:One-byte (0-9, A-Z, a-z), two-byte (kanji, hiragana, katakana, alphanumeric), one-byte and two-byte symbols ! " # $ % & ' ( ) * + , ‑ . / : ; = ?

[Note:]

・Up to two lines of [Camera title on screen] can be set.

・[MULTI] [Camera title on screen] can be set individually by the cameras.

[Camera title position]
Select the position where the character string is displayed in the image.
[Upper left]:Displays in the upper left corner of the screen.
[Lower left]:Displays in the lower left corner of the screen.
[Upper center]:Displayed in the center of the screen.
[Lower center]:Displays at the bottom center of the screen.
[Upper right]:Displayed in the upper right corner of the screen.
[Lower right]:Displays in the lower right corner of the screen.

[Note:]

・[MULTI] [Camera title position] can be set by cameras.

Date and time&In-Screen Characters > [Display type]
Sets the display format to either [Permeation] or [Opaque].
[Permeation]:Displays the date and time and characters on the screen in transparent characters.
[Opaque]:Displays date and time and on-screen characters in opaque (black-coated) characters.

Date and time&In-Screen Characters > [Character size]
Select the date and time displayed in the image and the character size of the character string.
50%:The standard 50% size is displayed.
75%:Displays the standard 75% size.
100%:Displays the standard size.
150%:This is displayed as 150% of the standard size.
200%:Displayed as 200% of standard size.

[Important]

・If the [Date/time position] and [Camera title position] settings are different, the frame rate may be lower than the set value.

・If the [Date/time position] and [Camera title position] settings are different, the characters may run out or overlap depending on the [Character size] setting and the number of characters. Confirm the display results before use.

・If [Character size] is set to [150%] or [200%], the frame rate may be lower than the set value.

・Depending on the [Character size] setting and the number of characters or the resolution of the images, it may be displayed only halfway or difficult to read. Confirm the display results before use.

[Note:]

・Even if 50% and 75% are set, the images of 640 x 360, VGA, 320 x 180, and QVGA show 100% [Camera title on screen].

・If [Detailed setting] [Overlay] is set to [On], the date and time&Characters on the Screen: You cannot set [150%] or [200%] in [Character size].

[Brightness status display]
ON/OFF is used to set whether the brightness status is displayed when adjusting the brightness.

[Note:]

・The brightness display in the image is displayed when the brightness is adjusted on the system device.

[Stabilizer]
ON/OFF is used to specify whether or not the camera's shaking correction function is enabled.
The gyroscope sensor can be used to compensate for low-frequency vibrations such as pole vibrations caused by wind and fine vibrations at high magnification, thereby shooting images with less blurring.
Use this function only when the camera is installed in an environment in which the camera frequently swings. It is effective to reduce the vibration.
Check the operation during installation.
Do not use the shaking correction function when using the product in an environment where there is no shaking.

[Important]

・When set to [On], the field angle is narrowed. When set to [On], check the field angle when mounting the camera.

・Picture correction does not work in the following cases.
Pan and tilt zoom are executing.
During position refresh

・In the following cases, it may not be possible to obtain sufficient shaking compensation depending on the shooting conditions.
When the subject is dark
-Rapid oscillation, such as mechanical vibration
Large-amplitude shaking
-Image quality/position setting in progress

・If the [Stabilizer] setting is changed with the following area set, the set area will be misaligned. Set [Stabilizer] and then set the respective areas.
-Privacy Zone
-Operation detection area
-Undesired detection area
-VIQS area
-Mask area
-overlay image
-Focus frame

・[New X Fixed]This function is not available when [Image capture mode] is set to [60fps Mode] or [50fps Mode].

・[New X Fixed]If you change the setting from [On] to [Off], it restarts automatically.

・[New X Fixed]When set to [On], [90°] and [270°] of [Image rotation] cannot be used.

・[New X Fixed]When set to [On], [Lens distortion compensation] cannot be used.

・[New X Fixed-2M][New X Fixed-5M]When set to [On], the zoom factor is limited to up to 3.1 times.

・[New X Fixed-8M][New X Fixed-6M]When set to [On], the zoom factor is limited to up to 2 times.

[Note:]

・When shaking occurs in a dark shooting environment, the shaking correction effect may be improved by setting the maximum exposure time to [1/100s] or faster shutter setting. Set the maximum exposure time depending on the installation environment.

・When [Stabilizer] is set to [On], the superdynamic setting is [Off].

・[PTZ]When [Stabilizer] is set to [On], the digital zoom factor is limited to half.

・Refer to the catalog specifications for the functions installed in each model.

[Image Rotation]
Select from [0 °(Off)], [90°] and [180 °(Upside-down)], and [270°].

[Important]

・If the [Image rotation] setting is changed with the following area set, the set area will be misaligned. Set [Image rotation] and then set the respective areas.
-Privacy Zone
-Operation detection area
-Undesired detection area
-VIQS area
-Mask area
-overlay image
-Focus frame

・If [Image rotation] is set to [90°] or [270°], the on-screen characters may be broken depending on the [Character size] setting and the number of characters.

・When [Image rotation] is set to [90°] and [270°], the positions that can be set to [Date/time position] and [Camera title position] are limited to [Upper left] and [Lower left].

・[New X Fixed]When [Stabilizer] is [On] and [Image rotation] is set to [90°] or [270°] from an external device, the system automatically restarts.

・[New X Fixed]When [Image rotation] is set to [90°] or [270°], [Stabilizer] cannot be used.

・[New X Fixed]When [Image rotation] is set to [90°] or [270°] and 320x180, QVGA images are displayed, characters in the images may be cut off.

[Note:]

・Depending on the [Image capture mode], you may not be able to set the [Image Rotation] to [90°] or [270°].

・If [Image capture size] is 320 x 180, [Image rotation] cannot be set to 90° or 270°.

・[New X Fixed]Even when [Image capture size] is set to 320x180, you can set [Image rotation] to 90° or 270°.

・Refer to the catalog specifications for the functions installed in each model.

[Mirror]
Use [On]/[Off] to set whether the images are reversed left or right.

[Note:]

・If [Image rotation] is set to [90°] or [270°], the mirror inversion is fixed in [Off].

[Indicator]
Select the ON/OFF status of the lamp. To check the operation status with the lamps, select [On].

[Note:]

・Refer to the catalog specifications for the lamps installed in each model.

・[MULTI_PTZ] [Indicator] can be set from the PTZ-camera.

[FunctionLED]
Select the operation to be notified by [FunctionLED]. Multiple operations can be selected.
[REC notification]:The [FunctionLED] lights when the camera is recording video distribution or when the camera video is being distributed.
[Impact detection notification]:The [FunctionLED] indicator flashes when the camera receives an impact.
[Casing open detection notification]:When the front cover of the camera is opened, [FunctionLED] blinks.

[Note:]

・When [Impact detection notification] is selected, [FunctionLED] flashes after the camera receives an impact. The [FunctionLED] will go out one minute after the flashing starts.

・When [Casing open detection notification] is selected, [FunctionLED] flashes while the front cover is open. The [FunctionLED] will go out when the front cover is closed.

・Even if [Indicator] is set to [Off], [FunctionLED] is not turned off. To turn off the [FunctionLED], remove all the checks.

[Audio out]
Sets whether to use the audio output terminal as the adjustment monitor output.
Audio/monitor

[Note:]

・When [Audio out] is set to [Audio], [Monitor out] cannot be selected.

・If you set [Audio transmission mode] to other than [Off] or [Mic input], you cannot set [Audio out] to [Monitor].

・If you set [Audio out] to [Monitor], you cannot set [Audio transmission mode] to anything other than [Off] or [Mic input].

[Monitor out]
Set the image format to be output from the image output terminal (MONITOR OUT).
NTSC/PAL

[Note:]

・The [Monitor out] setting can be changed when the imaging mode is 30 fps, 60 fps, or 15 fps.

・[PTZ]The output image may be reversed up or down.

・[New X Fixed]The output image is rotated according to the [Image Rotation] setting.

[Tilt adjustment lever position]
Set the [Tilt adjustment lever position] set when the camera is installed.
[High]/ [Mid]/ [Low]

[Note:]

・[MULTI_PTZ] The [Tilt adjustment lever position] can only be selected for the Multi-directional camera settings.

[Privacy zone display format]
Selects the display format of Privacy Zone from [Block] and [Blurring].
Click [Privacy Zone Settings] to display the [Privacy Zone Area Settings] screen of the image quality page.
→9.4.6　Setting the privacy zone (Privacy zone setting screen)

[Note:]

・[New X Fixed] When [Image capture mode] is set to [60fps Mode] or [50fps Mode], [Privacy Zone Format] cannot be set to [Blurring]. [Privacy Zone Format] is set to [Block].

・[New X Fixed] If [Privacy Zone Format] is set to [Blurring], [Lens distortion compensation] cannot be used.

・[New X Fixed-8M][New X Fixed-5M] When [Privacy Zone Format] is set to [Blurring], the frame rate is limited to the maximum 12.5fps when the maximum 15fps(25fps mode is selected).

・[New X Fixed-2M][New X Fixed-5M] When [Privacy Zone Format] is set to [Blurring], the zoom ratio is limited to a maximum of 3.1 times.

・[New X Fixed-8M] When [Privacy Zone Format] is set to [Blurring], the zoom factor is limited to up to 2 times.

・[Blurring] in [Privacy Zone Display Format] and [AI Privacy Guard (WV-XAE201W)] cannot be used at the same time.

8.2[SD memory card] for setting SD Memory Cards

On the Basic Page, press the [SD memory card] tab. Refer to the following how to display and operate the Advanced menu.
→5.1　How to display
→5.2　How to operate
Here, settings for the SD Memory Card are made.

[Note:]

・The layout of each setting item varies depending on the model.

・Refer to the catalog specifications for the functions installed in each model.

[Note:]

・[Rapid PTZ] Refer to [Insert/Remove SD memory card mode] to install and remove the SD Memory Card.

Operation mode

[SD memory card]
You set whether to use the SD Memory Card or not.

[Note:]

・If [Image capture mode] is set to [60fps Mode] or [50fps mode], the SD Memory Card functions are not available. [SD memory card] is set to [Not use].

[Ext. software mode]
This setting is set to [On] when the installed function extension software uses the SD Memory Card of the computer.
[On]:The function extension software can use the SD Memory Card of the computer.
[Off]:The function extension software cannot use the SD Memory Card of the computer.

[Note:]

・For the functional extension software we sell and provide, please refer to our technical information website<Control No. C0103>.

・It is recommended to format the SD Memory Card when setting the function extension software mode from [On] to [Off].

・The operation of the recording function to the SD Memory Card cannot be guaranteed when the extended software using the SD Memory Card is operated.

[SD memory card file system type]
You can select the file system format of the SD memory card. This can be selected only when [Ext. software mode] is [On].
[FAT(FAT16/FAT32/exFAT)]：FAT formatted SD memory cards can be used.
[ext(ext4)]：ext formatted SD memory cards can be used.

[Important]

・If you change [SD Memory Card File System Format], click the [Execute] button in [Format] to format the SD memory card.

[Note:]

・When “ext(ext4)” is selected, the SD memory card can be used only with function extension software. Therefore, you will not be able to use functions such as recording video and audio to the SD memory card, or notification of remaining space in the SD memory card.

・When "ext(ext4)" is selected, the past information on the SD memory card will be deleted and cannot be displayed in the [Status] tab of the Maintenance page.
→16.3　[Status] for checking the status

・When “ext(ext4)” is selected, the capacity of the SD memory card cannot be displayed.
→8.2　[SD memory card] for setting SD Memory Cards
→2.7　Display the log list
→2.4.2　View images from a tablet terminal

[Audio recording]
You can set whether to record audio data when storing movies in MP4 format.
[Off]:Audio data is not saved in movies (MP4 format).
[On]:Audio data is saved in the movie (MP4 format).

[Note:]

・If you use [Audio recording], you must set [Recording format] to streams.

[Remaining capacity notification]
To notify the remaining capacity of the SD Memory Card using the mail notification function or the unique alarm notification function, select the following whether to start notification when the free space becomes the %.
50%/ 20%/ 10%/ 5%/ 2%

[Note:]

・Remaining capacity notification is made for each remaining capacity value below the set value.
For example, when set to [50%], the remaining capacity is 50%, 20%, 10%, 5%, and 2%, respectively. The timing of notification may deviate slightly.

[Overwrite]
You set whether to overwrite and save images when the free space on the SD Memory Card is running low.
[On]:If the free space on the SD Memory Card decreases, the old image is overwritten and saved repeatedly.
[Off]:If the SD Memory Card has no free space, the SD Memory Card stops storing data.

[Important]

・If you do not want to use the SD Memory Card, set it to [Not use].

・Before removing the SD Memory Card from the computer, be sure to set it to [Not use]. If the SD Memory Card is set to [Use], the SD Memory Card may be damaged.

・When the SD Memory Card is set to [Use], the SD Memory Card is saved according to the [Save trigger] setting.

・After installing the SD Memory Card, set it to [Use].

・If the image update speed is high, the timing and interval of notification and recording may be misaligned. In addition, when multiple users receive images, notification or recording may not be performed as set. In that case, slow down the image update rate.

・The number of SD Memory Card rewrites is limited. If rewriting is frequent, the life of the watch may be shortened.

・The life of the SD Memory Card is affected by the number of image files saved to the SD Memory Card and the number of logs written.

・You can reduce the number of files saved to the SD Memory Card by selecting the stream in [Recording format] and setting the smaller value in [Bit Rate*/Client] of the stream to be recorded.

・If the SD Memory Card is written more frequently and the writing speed decreases, it is recommended to replace the new SD Memory Card.

・When switching from [Off] to [On], when the free space on the SD Memory Card is small, old images may be deleted to prepare for writing.

SD Memory Card security setting

[Additional info for detecting alteration]
Set whether to add information to enable detection when data on the SD Memory Card is falsified.
Falsification detection supports only video (MP4 format) and can be checked using dedicated software.
Please refer to our Technical Information Website provides specific software for tampering detection and how to use it.<Control No. C0304>.
To Advanced Settings>>Click the [button] to display the setting window for adding falsification detection information in a separate window.
→8.3　[Alteration detection] for detecting tampering

[SD memory card password lock]
Set the password on the SD Memory Card. When you set the password, you cannot write to or read from the SD Memory Card on any device other than this unit. If the SD Memory Card is stolen or lost, the risk of leakage of the recorded data can be reduced.

[Set]
If an SD Memory Card with no password set is inserted, the password can be set using the Set button.
[Password]/[Retype password]
Type a password.
Number of characters that can be entered:4 to 16 characters
Characters that cannot be entered:Double-byte and single-byte symbols " &

[Reset]
If an SD Memory Card with the password set has been inserted, the password can be canceled by pressing the release button.
[Password]
Type a password.
Number of characters that can be entered:4 to 16 characters
Characters that cannot be entered:Double-byte and single-byte symbols " &

[Change]
If an SD Memory Card with the password already set is inserted, the password can be changed by using the Change button.
[Old password]/[New password]/[Retype new password]
Type a password.
Number of characters that can be entered:4 to 16 characters
Characters that cannot be entered:Double-byte and single-byte symbols " &

[Status]
Displays the password lock setting status.
[During locking]:The SD Memory Card has a password and the lock function is enabled.
[Not set]:Lock function is disabled
The password setting status of the SD Memory Card is displayed.
[Password already set]:The password is set correctly.
[Error (unsupported SD memory card)]:Password lock not supported card is inserted. Check that the SDHC Memory Card or SDXC Memory Card is inserted.
[Error (password mismatch)]:The SD Memory Card cannot be used because the password set on the SD Memory Card and the password set on this computer do not match. Confirm the password is correct.
[Errors (other errors)]:This message is displayed when an error occurs in the SD Memory Card. Check the SD Memory Card.

[Note:]

・The password lock function supports SDHC memory card or SDXC memory card only.

・When using an SD Memory Card with Password lock set on a device other than this device, release the password by pressing the Password lock release button, and then remove the SD Memory Card from the card. You cannot cancel the password on any device other than the camera, such as a PC.

・If the [SD memory card password lock] [Status] is [Lock] and the SD Memory Card with no password setting is inserted into the computer, the password is automatically set to the SD Memory Card.

[Important]

・If you forget the set password, you cannot cancel the password. Since the SD Memory Card with the password set cannot be used, be sure to manage it carefully.

・If you forget the set password and want to replace it with a new SD Memory Card, set the [SD memory card password lock] [Status] to [Not been set] in advance by following one of the steps below.
Enter the password using the release button and press the set button.
-Initialize the set value from the maintenance page.

Recording stream

[Recording format]
Select the type of image data to be saved on the SD Memory Card.
[Off]:Image data is not saved.
[JPEG(1)]:Still image (JPEG(1)) is saved. Save your data according to the [JPEG(1)] Image capture size on the [Image] tabs of the video and audio pages.
[JPEG(2)]:Still image (JPEG(2)) is saved. Save your data according to the [JPEG(2)] Image capture size on the [Image] tabs of the video and audio pages.
[Stream(1)]:Save the movie (stream (1)) in MP4 format. Save your data according to the [Stream(1)] settings on the [Image] tabs of the video and audio pages.
[Stream(2)]:Save the movie (stream (2)) in MP4 format. Save your data according to the [Stream(2)] settings on the [Image] tabs of the video and audio pages.
[Stream(3)]:Save the movie (stream (3)) in MP4 format. Save your data according to the [Stream(3)] settings on the [Image] tabs of the video and audio pages.
[Stream(4)]:Save the movie (stream (4)) in MP4 format. Save your data according to the [Stream(4)] settings on the [Image] tabs of the video and audio pages.

[Important]

・Use an UHS-I (Ultra High Speed-I)-compatible card for the Speed Class 10 SD Memory Card.

・It is recommended to use the microSD memory card dedicated to i-PRO devices.

・When using SD Memory Cards other than those compatible with Speed Class 10, the bit rate of streams selected with [Recording format] should be 6144 kbps.

・When using SD Memory Cards compatible with Speed Class 10, the bit rate of streams selected by [Recording format] should be up to 12288 kbps.

・[MULTI] The SD Memory Card cannot be used except for the Speed Class 10.

・[MULTI] The bit rate of the streams selected in [Recording format] should be up to 4096 kbps.

[Note:]

・When [Stream] is selected, the [Stream] settings in the [Image] tabs of the video and audio pages are [Streams].&This switches to the [Record movie] setting.

・When [Recording format] is changed to [Stream], the following functions may be corrected.
-If [Transmission priority] is set to [Best effort], it is set to [Frame rate].
-If [Refresh interval] is set to [2s], [3s], [4s], or [5s], then it is set to [1s].

・[Recording format] cannot be changed to [JPEG] if [On] is set to [Additional info for detecting alteration].

・If [Recording format] is [Stream], the file to be saved is named automatically.

・If [Recording format] is [Stream], there may be fewer users that can be connected.

・If you configure [On] for [Audio recording], the maximum bit rate that can be configured for streams is limited.

・If you configure [On] for [Additional info for detecting alteration], the maximum bit rate that can be configured for streams is limited.

・[MULTI] If [Stream] is selected in [Recording format], the bit rate is restricted.

[Save trigger]
Select the method below to save images on the SD Memory Card.
[FTP/SFTP periodic transmission error]:FTP/Save the image when periodic transmission to the SFTP server fails.
This option is available only when [JPEG] is selected in [Recording format].
[Alarm input]:Saves the image when an alarm is generated.
[Manual]:Save the image manually.
[Schedule]:Save the image according to the schedule settings. This option is available only when [Stream] is selected in [Recording format].
→15　[Schedule] for scheduling

When [Alarm input] is selected in [Save trigger], the alarm type can be selected from the following.
[Terminal 1]:The image is saved when an alarm is generated at terminal 1.
[Terminal 2]:Image is saved when alarm is generated at terminal 2.
[Terminal 3]:The image is saved when an alarm is generated at terminal 3.
[VMD]:Image is saved when operation detection occurs.
[SCD]:The image is saved when undesired detection occurs.
[Impact detection]:Image is saved when impact detection occurs.
[Casing open detection]:Image is saved when opening detection occurs.
[Auto track]:Save the image when auto tracking occurs.
[Command alarm]:Saves the image when a command alarm is entered.

[Note:]

・If [Recording format] is streamed, [FTP/SFTP periodic image transmission error] cannot be set.

・To generate an alarm, use the [Alarm] tabs to set the alarm.

・If [Recording format] is [JPEG], [Schedule] cannot be set.

・When connected to our network disk recorder, [Save trigger] may be grayed out by [Network failure]. To change the [Save trigger] setting after you disconnect the recorder, set [SD memory card] to [Not use] and then set [Use] again.

・If [GOP control] is set to Advanced (Fixed GOP 60s + 1s keyframe), alarm recording cannot be set.

・Images are not recorded when sound detection alarm is generated.

JPEG manual storage recording

This setting is available only when [Recording format] is set to [JPEG(1)] or [JPEG(2)] and [Save trigger] is set to [Manual].

[File name]
Enter the file name for saving images to the SD Memory Card. The following file names are actually saved.
File name:File name entered + Date and time (year, month, day, minute, second) + Sequence number
Number of characters that can be entered:1 to 8 characters
Characters that cannot be entered:Double-byte and single-byte symbols " & * / : ; < > ? ￥ ¦

[Image saving interval]
If [Save trigger] is set to [Manual], select the interval to save images to the SD Memory Card from the following.
When [Image capture mode] is set to 30 fps/15 fps: 0.1 fps/0.2 fps/0.33 fps/0.5 fps/1 fps
When [Image capture mode] is set to 25 fps/12.5 fps: 0.08 fps/0.17 fps/0.28 fps/0.42 fps/1 fps

JPEG recording (when alarm occurs)

This setting is available only when [Recording format] is set to [JPEG(1)] or [JPEG(2)] and [Save trigger] is set to [Alarm input].

[File name]
Enter the file name for saving images to the SD Memory Card. The following file names are actually saved.
File name:File name entered + Date and time (year, month, day, minute, second) + Sequence number
Number of characters that can be entered:1 to 8 characters
Characters that cannot be entered:Double-byte and single-byte symbols " & * / : ; < > ? ￥ ¦

[Storage interval/number of images (pre-alarm)] [Image saving interval]
When [Save trigger] is set to [Alarm input], select the pre-alarm image interval to save the image to the SD Memory Card.
When [Image capture mode] is set to 30 fps/15 fps: 0.1 fps/0.2 fps/0.33 fps/0.5 fps/1 fps
When [Image capture mode] is set to 25 fps/12.5 fps: 0.08 fps/0.17 fps/0.28 fps/0.42 fps/1 fps

[Storage interval/number of images (pre-alarm)] [Number of images to be saved]
Select the number of pre-alarm images to be saved to the SD Memory Card when an alarm is generated.
[Off]/[1 pic]/[2 pics]/[3 pics]/[4 pics]/[5 pics]

[Storage interval/number of images (Post alarm)] [Image saving interval]
If [Save trigger] is set to [Alarm input] or [Manual], select the intervals below to save images to the SD Memory Card.
When [Image capture mode] is set to 30 fps/15 fps: 0.1 fps/0.2 fps/0.33 fps/0.5 fps/1 fps
When [Image capture mode] is set to 25 fps/12.5 fps: 0.08 fps/0.17 fps/0.28 fps/0.42 fps/1 fps

[Storage interval/number of images (Post alarm)] [Number of images to be saved]
Select the number of alarm images to be saved to the SD Memory Card when an alarm is generated from the following list.
[10 pics]/[20 pics]/[30 pics]/[50 pics]/[100 pics]/[200 pics]/[300 pics]/[500 pics]/[1000 pics]/[2000 pics]/[3000 pics]

Movie recording (when alarm is generated)

This setting is available only when the [Recording format] of the SD Memory Card is set to streaming and [Save trigger] is set to [Alarm input].

[Pre alarm (recording) duration]
Select whether to record before alarm. Sets the time to save to the SD Memory Card.
[Off]/ [1s]/ [2s]/ [3s]/ [4s]/ [5s]/ [8s]/ [10s]/ [15s]/ [20s]/ [25s]/ [30s]/ [40s]/ [50s]/ [60s]/ [90s]/ [120s]

[Note:]

・The values that can be set depend on the resolution and bit rate of the stream to be recorded. The higher the bit rate, the smaller the maximum value that can be set as the pre-alarm time.

[Post alarm (recording) duration]
Sets the time to save to the SD Memory Card after an alarm is generated.
[10s]/ [20s]/ [30s]/ [40s]/ [50s]/ [60s]/ [120s]/ [180s]/ [240s]/ [300s]

*Actual recording time may be longer than the time set for the post alarm time.

SD memory card information

[Remaining capacity]
The remaining capacity and total capacity of the SD Memory Card are displayed.
Depending on the status of the SD Memory Card, it may be displayed as follows.


Within the display	Description
‑‑‑‑‑‑‑‑MB/‑‑‑‑‑‑‑‑MB	SD Memory Card is not inserted. Otherwise, the remaining capacity cannot be acquired due to a read error.
******MB/******MB	SD Memory Card is not formatted.
########MB/########MB	The password lock of the SD Memory Card cannot be canceled.

[Note:]

・When [Overwrite] is set to [Off] and the remaining capacity of the SD Memory Card becomes [0MB], images are not saved to the SD Memory Card. When the free space on the SD Memory Card runs out, the specified mail address and unique alarm notification destination can be notified with the notification function.
→12.4.2　Mail sending when an alarm is generated
→12.12　[Notification] to set alarm notification

[Format]
To format the SD memory card, click the [Execute] button.
Format in the file format selected in [SD Memory Card File System Format].

[Note:]

・When formatting an SD memory card with [ext(ext4)] selected for [SD Memory Card File System Format], formatting may take about 20 minutes until it is completed depending on the SD memory card.

・After formatting the SD memory card in ext format, check the operation of the extension software using the SD memory card.

[Important]

・Prior to formatting, set [SD memory card] to [Use] on the basic pages.
→8.2　[SD memory card] for setting SD Memory Cards

・The SD Memory Card must be formatted using the [SD memory card] tabs before using the SD Memory Card. The following functions may not work properly when formatted outside of the [SD memory card] tabs.
-Save/retrieve image when alarm is generated
-Save/retrieve images when manually saved
-Save/retrieve images using the Schedule function
-Save/retrieve alarm log, manual/schedule save log, system log
-Saving/retrieving images using SD Memory recording function of our network disk recorder
-Play/download images on the SD Memory Card

・When formatting is performed, the operation is interrupted if another user is working on it.

・You cannot write to the SD Memory Card during formatting.

・When formatting is performed, all data stored on the SD Memory Card are deleted.

・Do not turn off the computer during formatting.

・After formatting, the SD Memory Card displays less than the total amount of space because it creates the initial directory required to operate.

・The use of an SD Memory Card for i-PRO devices is recommended.

・When recording images repeatedly on an SD Memory Card using the automatic overwrite function, use an SD Memory Card with high reliability and durability.

・Use an UHS-I (Ultra High Speed-I)-compatible card for the SD Memory Card that supports the speed class Class 10.

Installing and removing the SD Memory Card

[Insert/Remove SD memory card mode]
To install or remove an SD Memory Card, press [Execute].
After the SD Memory Card has been installed and removed, click the [Release] button.

[Note:]

・[Rapid PTZ] [Insert/Remove SD memory card mode] will appear only in Rapid PTZ Camera.

[Note:]

・[Rapid PTZ] "Now Maintenance Mode" is displayed on the image during [Insert/Remove SD memory card mode], and functions such as pan/tilt operation are restricted.

8.3[Alteration detection] for detecting tampering

When the data on the SD Memory Card is falsified, the data can be detected using the dedicated software.
Falsification detection supports only video files (MP4 format).
For information on how to set up falsification detection, please refer to the support video page of the support site.<Control No. P0001>.
Please refer to our Technical Information Website provides specific software for tampering detection and how to use it.<Control No. C0304>.

[Note:]

・If you use Falsification Detect, you must set [Recording format] to streaming.

[Select certificate]
Select the certificate to use for falsification detection.
[Pre-install]:Select the pre-installation certificate.
CA:Select a CA certificate. This is displayed only if the CA certificate is installed.

[Additional info for detecting alteration]
Set whether to add the information for detecting tampering to the movie file (MP4 format) to be saved in the SD Memory Card.

[Note:]

・If the [Recording format] of [Recording stream] is set to JPEG, the setting cannot be changed to On.

[Pre-install Certificate-Get Certificate]
Click the Run button to download the route certificate for the pre-installation certificate. Use the downloaded certificate to detect falsification of movies (MP4 file) on the SD Memory Card using the dedicated software.

[CA certificate-CRT key generation]
Creates a CRT key (encryption key) for use in falsification detection.
CRT key generation is performed in [CRT key generation dialog] displayed when [Execute] is clicked.

[CA Certificate-Create Signature Request (CSR)]
When using CA certificates issued by a certification authority as CA certificates for use in tampering detection, it generates a signature request (CSR) to apply to the certification authority.
Create a signature request (CSR) by clicking on the [Execute] button. This is displayed in the [Create Signature Request (CSR) dialog].

[CA certificate-certificate installation]
This feature installs certificates (CA certificates) issued by certification agencies and displays information about installed certificates (CA certificates).
When [Select File] is clicked, the [Open File Dialog] is displayed. Select the certificate (CA Certificate) file issued by the certification authority. Click [Execute] to install the certificate (CA Certificate).
If a certificate (CA certificate) is installed, the file name of the installed certificate is displayed.

[CA certificate-information]
The information of the certificate (CA certificate) issued by the certification authority is displayed.
When [Execute] is clicked, the registered contents of the installed certificate (CA certificate) are displayed in [CA Certificate Confirmation Dialog].
Clicking [Delete] deletes the installed certificate (CA certificate).

[CA Certificate-Get Certificate]
The certificate (CA certificate) issued by the certification organization is downloaded from this machine.
Use the downloaded certificate to detect falsification of movies (MP4 file) on the SD Memory Card using the dedicated software.

[Important]

・When deleting a valid certificate (CA certificate), make sure that you have a backup of the certificate (CA certificate) on your PC or recording media. To reinstall, a certificate (CA certificate) is required.

8.4How to set up falsification detection

[Note:]

・The [falsification detection] setting can only be selected for models that have a falsification detection function.

・Refer to the catalog specifications for the functions installed in each model.

For information on how to set up falsification detection, please refer to the support video page of the support site.<Control No. P0001>.

8.5[Overlay image] to set overlays

[Note:]

・The [Overlay image] setting can only be selected for models that have a Overlay image function.

・Refer to the catalog specifications for the functions installed in each model.

The overlay image function embeds images uploaded to the computer into live images (overlay display).
On the Basic Page, press the [Overlay image] tab. Refer to the following how to display and operate the Advanced menu.
→5.1　How to display
→5.2　How to operate
Here, the overlay image function is set.

[Overlay image]
Select the camera for which you want to set the overlay.
[Camera 1]:Sets camera 1 overlay.
[Camera 2]:Sets camera 2 overlay.
[Camera 3]:Set the camera 3 overlay.
[Camera 4]:Set the camera 4 overlay.

[Note:]

・[MULTI] [Camera selection] can be selected only for Multi-directional cameras.

[Overlay]
Use [On] or [Off] to set whether the uploaded images are overlaid or not.
[On]:Displays the overlay. When set to [On], overlaid images are recorded during recording on the SD Memory Card.
[Off]:Overlay is not displayed.

[Note:]

・If [[Character size]] is set to [150%] or [200%] for [Characters in Date/Time Screen], [Overlay] cannot be set.

・[New X Fixed]If [Image capture mode] is set to [60fps Mode] or [50fps Mode], [Overlay] cannot be set.

・Refer to the catalog specifications for the functions installed in each model.

[Image Selection]
Follow the procedure below to upload an overlay image file to the computer.

1)Click the [Select File] button to select the image file saved in the PC.

2)Click [Execute] to upload the selected image files to the computer. When an image file is uploaded, the uploaded image (uploaded image) is displayed as an overlay on the setting screen.

You can use image files with the following specifications for overlay display:

・Image format: 256 color bitmap (BMP: Windows format)

・Image size: 24 pixels x 24 pixels to 512 pixels x 512 pixels

・File capacity: 257 Kbytes or less

[Note:]

・Save the image file in a folder that does not use space or double-byte characters. You may not be able to upload files saved in spaces or folders using double-byte characters.

[Important]

・Do not turn off the computer or operate the machine during upload of the image file.

・The uploaded image displayed is reduced depending on the resolution of the live image. The image quality of the uploaded image may deteriorate and be displayed. Check the image overlaid on the live image page.

・The uploaded image is saved when uploaded.

[Position]
The uploaded image display position (upper left corner of the image) is displayed with [X] and [Y] coordinates.

There are two ways to change the display position of uploaded images.

・Drag and drop the uploaded image displayed by using the mouse.

・Enter the coordinates for [X] and [Y] and press [Set].

Input digits:
-If [Image capture mode] is [16:9 mode]
X: 0 to 639, minus the size next to the uploaded image
Y: 0 to 359, minus the vertical size of the uploaded image
-If [Image capture mode] is [4:3 mode]
X: 0 to 639, minus the size next to the uploaded image
Y: 0 to 479, minus the vertical size of the uploaded image

[Note:]

・You can change the display position by moving the red frame displayed when dragging the uploaded image.

・Coordinates for displaying uploaded images to protrude from the top of the setting screen cannot be set.

・When uploaded images are moved by the mouse, the display position is saved without clicking the [Set] button.

・Even if you move the uploaded image to the edge of the screen, there may be a gap between the image and the edge of the screen.

[Important]

・After changing the [Image capture mode] settings, check the position of the uploaded images. If the display position is misaligned, set the display position again. If the uploaded image is displayed out of the setting screen, the display position returns to the initial value (center of the live image).

[Permeation]
Use [On] or [Off] to set whether or not the selected colors are transmitted by [Selection of color to be penetrated].
[On]:Transmits colors selected in [Selection of color to be penetrated].
[Off]:The colors selected in [Selection of color to be penetrated] are not transmitted.

[Selection of color to be penetrated]
Select the color to be transmitted as shown below.

1

Clicking [Color Selection] displays the sub-window with the uploaded images.

2

Click the color to be transmitted in the displayed image. The selected color and RGB values are displayed.

3

Close the sub-window by clicking [Close].

4

Finally, clicking on the [Set] will transparent the selected colors.