Add new product |
|
Add new product |
|
Add new product |
|
|
New functions and addendum (Firmware Ver.2.33) |
・ The following was added to the communication protocol FTP/SFTP function of the file transfer function. (→14.2.2 Configuring FTP/SFTP transmission function) ・Add 2fps, 3fps to Image-Update Rate ・Add 1920x1080 to Image capture size for pre-alarm ・Expand image destination server to two locations ・ A 0.5s, 1s, 2s, 3s, 4s was added to the alarm absence detection period. (→12.1 [Alarm] to set alarm operation) ・ The function to change the image quality at the time of sunrise and sunset has been added to the schedule setting. (→15 [Schedule] for scheduling) ・ Added the [Enable/Disable] setting for [SNMP] in the [Advanced] tab of the Network page. (→14.2.7 Set SNMP) ・ You can now edit the camera title by adding and clicking the title edit icon next to the camera title. (→2.3 Viewing images from a PC) ・ You can now select [SD Memory Card File System Format] and [FAT(FAT16/FAT32/exFAT)] and [ext(ext4] to select the file system format of the SD memory card. (→8.2 [SD memory card] for setting SD Memory Cards) |
New functions and addendum (Firmware Ver.2.40) |
・ Add 1280x720 image capture size for Stream (1) and Stream (2) of the Multi-directional sensor camera 4MP model.(→9.3 [Image] for setting up streams) ・ The information in the notes has been changed due to the relaxation of frame rate restrictions during [GOP control].(→9.3 [Image] for setting up streams) ・ The note description has been changed because the tracking performance of the auto track function may lower depending on the [Maximum shutter] setting.(→10.3 Set auto-tracking (Auto-tracking screen)) ・ A note description has been added regarding function settings that are not applied when settings data is restored.(→16.5 [Data] to back up/restore configuration logs) |
Add new product |
|
Add new product |
|
New functions and addendum (Firmware Ver.2.50/[New X Fixed] Ver.3.10) |
・ A SAN entry field has been added to the CSR creation screen.(→14.3 Setting up HTTPS) ・ The initial password for data encryption has been changed to blank.(→13.5 [Data encryption] for setting up data encryption) ・ The names of connection options for HTTP and HTTPS have been changed. [TLS1.2] has been changed so that it can now be enabled or disabled.(→14.2.5 Set up HTTPS) ・ A "Diag." function has been added to HTTP alarm notifications.(→12.12.2 Set the HTTP alarm notification) ・ The [Security] settings screen has been added to the [User mng.] menu. Settings related to security can be configured in this section.(→13.6 [Security] to configure security) ・ "MD5" has been removed from the SNMPv3 [Authentication].(→14.2.7 Set SNMP) ・ "EAP-MD5" has been removed from the [EAP method] for IEEE 802.1X.(→13.4 [IEEE 802.1X] to configure IEEE 802.1X) |
Add new product |
|
New functions and addendum (Firmware Ver.2.60/[New X Fixed] Ver.3.20) |
・ In order to change the font of the live image screen and i-PRO logo design, a description has been added to the announcement.(→2.3.2 About live image pages) |
Add new product |
|
Add new product |
|
Add new product |
|
New functions and addendum (Firmware Ver.2.70/[New X Fixed] Ver.3.30) |
・ Due to the change of icons, the images on the live image screen have been replaced. (→2.1 Initial Setting) (→2.2 Initial setting (Multi-directional/PTZ integrated camera)) (→2.3.2.1 Live image pages of Fixed Cameras) (→2.3.2.2 Live image pages of the PTZ camera) (→2.3.2.3 Live image pages of Multi-directional Cameras) (→2.3.2.4 Live image pages of Multi-directional/PTZ integrated cameras) (→2.3.3 Monitor images from multiple cameras) (→2.7 Display the log list) (→2.8.1 When playing JPEG images stored on the SD Memory Card) (→2.8.2 Play back the image of the stream stored on the SD Memory Card) (→13.5 [Data encryption] for setting up data encryption) ・ The setting window for connecting Remote Monitoring was added to "Remote Monitoring" of "Network".(→14.5 Use Remote Monitoring) |