User Manual

  • 1Introduction
    • 1.1About User Manuals
    • 1.2Compatible models and symbols in this manual
    • 1.3Abbreviation
    • 1.4Disclaimer
    • 1.5For trademarks and registered trademarks
    • 1.6NETWORK RELATIONSHIP
    • 1.7Instructions for use
  • 2Operation
    • 2.1Initial Setting
    • 2.2Initial setting (Multi-directional/PTZ integrated camera)
    • 2.3Viewing images from a PC
    • 2.4Viewing images from mobile/tablet terminals
    • 2.5Manually save images on the SD memory card
    • 2.6Operation when alarm is generated
    • 2.7Display the log list
    • 2.8Play back images on the SD Memory Card
  • 3Setting
    • 3.1Displaying the configuration panel from the PC
    • 3.2[Basic] to perform basic settings
    • 3.3[Stream] for setting images
    • 3.4[Image quality] for setting image quality
    • 3.5[Zoom] for setting EX zoom
    • 3.6[Zoom] for setting EX optical zoom
    • 3.7[Zoom] for set zoom/focus
    • 3.8[Audio] for setting sound
    • 3.9[Alarm] to set alarm
    • 3.10[Detailed setting] for switching to advanced settings and setting related to the displayed images
  • 4About network security
    • 4.1Security function of the unit
  • 5Displaying the camera settings menu from the PC
    • 5.1How to display
    • 5.2How to operate
    • 5.3Camera Advanced Menu Screen
  • 6[Ext. software] for managing and scheduling advanced software
    • 6.1[Software mng.] for installing, uninstalling, and upgrading function extension software
    • 6.2[Operation sched.] for scheduling extended software
    • 6.3[Control log] to check the [Control log] of the function extension software
  • 7[Easy Setup] to use easy setting
    • 7.1[Easy installation] where easy installation is performed
    • 7.2[Internet] to set up an Internet-based disclosure system
    • 7.3[Event action] for setting events
  • 8[Basic] for basic setup of the machine
    • 8.1[Basic] to perform basic settings
    • 8.2[SD memory card] for setting SD Memory Cards
    • 8.3[Alteration detection] for detecting tampering
    • 8.4How to set up falsification detection
    • 8.5[Overlay image] to set overlays
  • 9[Image/Audio] for setting images and sound files
    • 9.1[Image] to set the imaging modes
    • 9.2[Image] for setting JPEG images
    • 9.3[Image] for setting up streams
    • 9.4[Image quality] to set the image quality
    • 9.5[Audio] for setting sound
  • 10Set PTZ
    • 10.1[Cam. Function] for setting the operation of cameras
    • 10.2[Position] for setting positions
    • 10.3Set auto-tracking (Auto-tracking screen)
    • 10.4Set Auto Track Alarm (Auto Track Alarm screen)
  • 11Configure the multi-screen settings[Multi-screen]
  • 12[Alarm] to set the alarm
    • 12.1[Alarm] to set alarm operation
    • 12.2[Alarm] for setting the output terminal
    • 12.3[Alarm] to change the aux name
    • 12.4[Alarm] to set alarm linkage operation
    • 12.5[VMD area] for setting motion detection
    • 12.6[VMD area] to set the motion detection area
    • 12.7[SCD area] to set up undesired detection
    • 12.8[SCD area] to set up undesired detection areas
    • 12.9[Audio detection] for setting sound detection
    • 12.10[Impact detection] for setting impact detection
    • 12.11[Casing open detection] for setting opening detection
    • 12.12[Notification] to set alarm notification
  • 13[User mng.] to set authentication
    • 13.1[User auth.] to configure user-authentication
    • 13.2[Host auth.] to configure host-authentication
    • 13.3[System] to set preference streams
    • 13.4[IEEE 802.1X] to configure IEEE 802.1X
    • 13.5[Data encryption] for setting up data encryption
    • 13.6[Security] to configure security
  • 14Networking configuration [Network]
    • 14.1Networking [Network]
    • 14.2[Advanced] for advanced networking settings
    • 14.3Setting up HTTPS
    • 14.4How to configure DDNS
    • 14.5Use Remote Monitoring
  • 15[Schedule] for scheduling
    • 15.1How to set the schedule
    • 15.2How to Delete Schedule
    • 15.3How to change the image quality based on the time of sunrise/sunset
  • 16[Maintenance] to maintain the machine
    • 16.1[System log] to check the system logs
    • 16.2[Upgrade] to upgrade the software
    • 16.3[Status] for checking the status
    • 16.4[Default reset] to initialize and restart the computer
    • 16.5[Data] to back up/restore configuration logs
  • 17Viewing Our Support Website [Support]
  • 18Other
    • 18.1System Log Display
    • 18.2Trouble!?
    • 18.3Directory structure of SD Memory Card
  • 19Change history