9[Radar] to set advanced radar settings

On the Radar page, you can configure settings related to radar settings, PTZ linkage, and radar-related detection.
The Radar page consists of the [Radar Settings] tab, [PTZ Linkage] tab, [Radar detection] tab, and [Radar obstruction detection] tab.

9.1[Radar Settings] for setting units

[Unit Settings]
[Unit]:Set the units of semi-circular images that indicate the area of the radar irradiation from [Meters]/[Feet].

9.2[Radar Settings] for configuring basic radar settings

[Basic settings]
[Radar transmission]
Set the setting of the radar transmission with [On]/[Off].
[On]: Use the radar transmission function.
[Off] : Do not use Radar transmission function.
[Notice]

・Transmits multicast packets with the PTP (Precision Time Protocol (2-second period) protocol regardless of the [On] or [Off] of the [Radar transmission].
[Monitoring mode]
Switches the monitoring mode of the radar.
[Wide-area monitoring]: Detects the entire detectable range of the radar.
[Boundary monitoring]: Prioritize the horizontal detection target of the radar.
[Notice]

・This cannot be selected when [Radar transmission] is [Off]


・If the Detection filter setting is set to [Priortize Vehicle] when [Boundary monitoring] is selected, the mode is changed to [None]


・In [Boundary monitoring], it operates with high sensitivity to prevent overlooking intrusions.For this reason, detection may occur more frequently in some environments.It can be optimized by adjusting the detection sensitivity and mask area, so please check the settings according to the installation environment.
[Detection sensitivity]
Sets the radar detection sensitivity.
[Low]／ [Middle]／ [High]
[Reference]
When the detection sensitivity is set to [High], the detection distance is extended and it is easy to detect even small movements. However, there is a risk of erroneous detection of grass and tree shaking. If you are concerned about false positives, set to [Middle] or [Low].
[Detection filter]
Set the radar detection filter.
[None]/[Priortize People]/[Priortize Vehicle]
[Reference]
Select [Priortize People] to detect a person first, [Priortize Vehicle] to detect a car, or [None] to detect both a person and a car.
[Fluctuation Filter Strength]
Sets the fluctuation filter of the radar.
[Off]／ [Low]／ [Middle]／ [High]
[Reference]
Selects the detection level of swinging objects (grass, branches of trees, etc.). When [High] is set, it is harder to detect swinging objects, and there is less false positives due to grass or tree jitter. However, it is harder to detect small movements. Also, it takes longer for the radar to detect after the target is moved. Set to [Middle] or [Low] or [Off] if you want to detect small movements, or if you want to shorten the time between when a target is moved and when it is detected.
[Radar Channel]
Set the channel to use the radar.
[ch1]／ [ch2]／ [ch3]／ [ch4]／ [ch5]／ [ch6]
[Reference]
Select the channel to use the radar. When using multiple radars, connect the radar to the same wired network and set a different channel for the nearby radar. If the radars of the same channel are in the vicinity, false positives may occur due to interference between the radars. Also, if the radars are connected to different networks, or if wireless communication is used for the connection, false positives may occur due to interference between the radars even if different channels are set.

9.3[Radar Settings] for configuring radar-related settings

[Display settings]
[Radar Background Screen Color]
Select [White] or [Gray] as the background color.
[White]:Set the radar background color to [White].
[Gray]:Set the radar background color to [Gray].
[Radar Display Transparency]
Set the transparency of the semi-circular images that indicate the radar area in [Off (no transparency)]-[90%].
[30%]～[90%]：Set the transparency of the semi-circle image representing the range of the radar to [30%] to [90%].
[Show Track History]
Select from [Off (No indication)] to [24h] for the trajectory data display time on the radar screen.
[3s]～[24h]：Set the trajectory view in the radar window to [3s] to [24h].
[Reference]

・When the trajectory data display is set, a blue or green line is displayed depending on the status of the radar detection.


Blue line: Radar detection unknown report
Green line: Radar detection notification
[Show Raw Radar Data]
Set the point cloud data [Display] in the radar window to [On] or [Off].
[On]：Set the point cloud view in the radar window to [On].
[Off]：Set the point cloud view in the radar window to [Off].
[Icon/Text Size]
Set the character size of the radar screen from [Large]/[Medium]/[Small].
[Large]:Set the icon/font size to [Large].
[Medium]:Set the icon/font size to [Medium].
[Small]:Set the icon/font size to [Small].
[Notice]

・If Image capture size of 640 x 360 or less is set on the radar side, icons and characters may be difficult to see.
[Show Object Type]
Set the object type indication with [On]/[Off] of [Display].
[On]：Set the object type indication in the radar display to [On].
[Off]：Set the object type indication in the radar display to [Off].
[Show Movement Speed]
Set the movement rate indication with [On]/[Off] of [Display].
[On]：Sets [On] for displaying the movement speed of the radar display.
[Off]：Sets [Off] for displaying the movement speed of the radar display.

9.4[PTZ Linkage] for checking the connectivity of registered PTZ

[Registered PTZ Camera]
Press [Check Camera Connection] to check the status of the connected PTZ cameras.
[Notice]
For details on how to link PTZ cameras, refer to the following pages.
→Calibration guide

9.5Setting PTZ camera-control method [PTZ Linkage]

[PTZ camera-control method]
[Camera 1] ～ [Camera 4]
Setting the control method for linked PTZ cameras.
[Auto track priority]: Use the Auto Track function of the linked PTZ cameras.
[Radar control only]: Does not use the auto tracking function of linked PTZ cameras.
[Notice]

・If the linked PTZ cameras are not equipped with a AI, setting [Auto Tracking Priority] may reduce the accuracy of auto tracking. Set to [Radar Control Only] when working with PTZ cameras that do not have a AI.

9.6Setting Up PTZ Camera-Tracking [PTZ Linkage]

[PTZ Camera Tracking]
[Multi-Object Tracking Mode]
Select from [Prioritize First Object]/[Prioritize Last Object]/[Prioritize Key Points]/[Capture All in Order].
[Prioritize First Object]:Priority is given to tracking previously detected objects.
[Prioritize Last Object]:The object detected later is prioritized for tracking.
[Prioritize Key Points]:Prioritize tracking of objects close to important points.
[Capture All in Order]:Images are taken sequentially for detected objects.
[Shooting time]
Sets how long each object is recorded when [Capture All in Order] is selected.
[1s]～[99s]
[Important point display position]
Set the location of the critical point that you want to base on when you select [Prioritize Key Points] in [Multi-Object Tracking Mode].
Set the coordinates of the important point with the upper left as the origin. Key points are indicated by a ✕ symbol.

[X]：[0]～[1919]


Increasing the number moves the icon of the important point to the right.


[Y]：[0]～[1079]


Increasing the number moves the icon of the important point down.
[Notice]

・If you have set the location of the important point, you can move the icon "✕" indicating the important point by dragging.


If you move it by dragging, the setting is reflected immediately.


･ Press [Set] to save and reflect the [Multi-Object Tracking Mode], [Shooting time] and [Important point display position] settings.

9.7[Radar detection] for setting radar detection

Radar detection setting
[Detection Settings]
Clicking [To detection settings] opens [Radar detection settings screen].

9.7.1Radar detection setting [Radar detection settings screen]

The Security Radar is used to set the area/condition for detecting moving objects.
Select a person, car, or unknown detection object for each detection area. Select one of the detection modes: intrusion detection, delay detection, and line crossing.
Up to 8 detection areas and up to 8 mask areas can be set for each setting.
a: Alarm notification area, b: Drawing area, c: Detection condition setting

9.7.1.1Alarm notification area

When Security Radar detects a moving object, the alarm icon and the icon corresponding to the three detection modes light up. Clicking the alarm icon clears the alarm status and turns off all icons.
1.
Alarm icon
2.
Line Cross (CROSS LINE)
3.
Intrusion Detection (INTRUDER)
4.
Detect delay (LOITERING)

9.7.1.2Drawing area (Setting the detection area)

a: Radar image screen, b: Drawing type
[Radar Video Window]
This screen is used to draw the detection area or detection line.
To draw, select the [Detection area(Polygon)] or [Cross line] icon you want to draw from the [Paint type] and drag it to [Camera Image Window].
An alarm occurs when a moving object is determined within the detection area set by drawing.
In addition, an alarm occurs when a moving object crosses the set detection line.
[Paint type]
Click the icon to select a drawing format.
1.
Line Cross: Draws a detection line for line crossing.
2.
Detection area (polygon): Draws a detection area with a polygon (up to 16).
3.
Mask area (polygon): Draws a mask area with a polygon (up to 16).
4.
Detection Area (Select): Select the detection area (detection line) you draw.
5.
Mask Area (Select): Select the mask area you draw.
6.
Erase: Erases the selected detection area (detection line) and mask area.
7.
Erase All: Erases all the detection areas (detection lines) and mask areas that have been drawn.
[Notice]

・When the detection area (polygon) and mask area (polygon) are drawn, the area setting is completed by selecting the start point last time.


・The size, length, and shape of the detection area, detection line, and mask area selected in the detection area (selection), and mask area can be changed by dragging the corners of the frame or the end points of the line. You can also move it by dragging the inside or the line of the frame.


・When deleting a detection area or a detection line, and multiple detection areas or detection lines overlap, left-clicking the mouse in the overlapping area switches the selected frame in order.


・You cannot select multiple detection areas, detection lines, and mask areas at the same time.


・By default, the entire drawing area is set as the detection area.

9.7.1.3Detection condition setting

[Detection Settings]
Use [Detection Settings] to set the detection criteria.
The set conditions can be executed by the schedule setting.
See the following pages for scheduling.
→6.1.1　Setting Schedule/Alarm (Event Type Setting Screen)
[Detection area]
The settings of up to eight detection areas and detection lines are distinguished by the color of the drawing lines.
The stroke colors are set sequentially, starting with [1(White)].
[Detection object]
Check the object (moving object) to be detected for each detection area.
There are three types of objects to be detected:
[Human]/[Vehicle]/[Unknown]
Default setting: [Human], [Vehicle], and [Unknown] are checked
[Notice]

・Three detection objects can also be used in combination.


・If you want to detect all moving objects, check all three.


・All detection objects are initially [Unknown] and will be [Human] and [Vehicle] for some time if the target is a person or car. If you want to send an alert immediately after detecting it, check [Unknown] as well. If you want to reduce false alarms due to grass or trees, uncheck the unnecessary detection objects.


・If you want to prioritize people or cars for detection, you can set it in the [Detection filter settings] of the [Radar Settings].
[Detection mode]
Select the mode to be detected for the specified detection area or detection line.
　
[Intruder]:Detects that moving objects have entered the detection area.
　
[Loitering]:Detects that moving objects remain in the detection area for a certain period of time.
　
[Cross line]:Detects that the moving object exceeds the detection line in the specified direction.
Default: [Intruder]
[Direction setup]
When the detection mode is set to [Cross line], set the direction to detect.
For [Cross line], select from the following three directions:
　
[A --> B]:Detect when moving from A to B.
　
[B --> A]:Detect when moving from B to A.
　
[A B]:Detects when moving from A to B or from B to A.
Initial setting: B --> A direction
[PTZ Camera]
Sets the PTZ that will be shot when radar is detected in the set area/condition.
[Camera 1]/[Camera 2]/[Camera 3]/[Camera 4]
[Notice]

・You can select multiple cameras to shoot when radar is detected.


・For the settings of Camera 1 to Camera 4, refer to the User Manual.
[Notice]
Clicking [Set] saves the settings currently being displayed.

9.7.1.4Area setting procedure

1.
Make sure that the [1.Alarm detection area setting] window is selected.
2.
In the drawing area, draw the area you want to detect (hereinafter referred to as detection area).
Draw a location (hereinafter referred to as the mask area) that you do not want to detect within the detection area.
Eight areas can be set for detection area and mask area.
3.
Three detection modes are set for each detection area: [Intruder], [Loitering], and [Cross line].
4.
If [Detection mode] is [Cross line], set the [Direction setup].
5.
Use [PTZ Camera] to set up a linked PTZ to capture the detection target.
6.
Click [Set] to save the detection criteria.

9.7.2Advanced [Radar detection settings screen]

You can configure detailed settings for Radar Detection by clicking [2.Detailed setting] on the [Radar detection settings screen].
[Detailed setting]
[Radar Detection Alarm]
Set the conditions for an alarm to be generated when an object is detected within the specified area.
[Trigger alarm only on first motion detection]:An alarm is generated only when it is detected for the first time in the area.
[Trigger alarm on every motion detection]:Triggers an alarm every time it is detected in the area.
[Distance Settings]
Set the movement speed and distance for the object alarm.
[Movement Speed]:Sets the movement speed of the object subject to the alarm.
Minimum speed :[1]km/h
Maximum Speed:[65]km/h
[Distance Threshold]:Set the movement distance of the object to be detected.
[0]～[99]m
[Time setting]
Sets the time from detection to alarm generation.
[Intruder detection time]
Set the time from detecting an intrusion into the area to generating an alarm.
[0.2s]／ [0.4s]／ [1s]／ [2s]／ [3s]／ [4s]／ [5s]／ [6s]／ [7s]／ [7s]／ [9s]／ [10s]
[Loitering detection time]
Set the time from when stagnation in the area is detected until the alarm is generated.
[10s]／ [20s]／ [30s]／ [1min]／ [2min]／ [5min]／ [10min]
[Cross line detection time]
Sets the time from the detection of crossline passage to the generation of an alarm.
[0.2s]／ [0.4s]／ [1s]／ [2s]／ [3s]／ [4s]／ [5s]／ [6s]／ [7s]／ [7s]／ [9s]／ [10s]
[Latitude / longitude sending settings]
[Latitude / longitude sending settings]
You can set whether to send latitude and longitude information of objects detected by the radar.
[Enable]:The latitude and longitude information of the object detected by the radar is transmitted.
[Disable]:The latitude and longitude information of the object detected by the radar is not sent.
[Radar Installation Position]
Set the location where the Security Radar is installed.
[Latitude]/[Longitude]/[Azimuth angle]
[Notice]
Latitude and longitude can be entered up to seven decimal places and the direction angle can be entered up to one decimal place.
When the latitude/longitude send setting is enabled, the position of the detected object is automatically calculated based on the Security Radar installation position.
[Notice]
Press [Set] to save and apply the settings.

9.7.3Link to alarm setting [Radar detection settings screen]

Clicking [3.Alarm settings] on the [Radar detection settings screen] enables you to set the alarm linkage operation when a radar is detected.
[Alarm linkage setting]
[Alarm E-mail notification]
Clicking [E-mail notification setup >>] takes you to the E-mail setting window when an alarm occurs.
For details on the settings, refer to the User's Manual.
[Alarm image recording(SD memory card)]
Clicking [SD memory card setup >>] moves to the setting window for saving images to the SD memory card when an alarm occurs.
→10.4.2　Settings related to SD memory card recording when an alarm occurs
[TCP alarm notification]
Clicking [TCP alarm notification setup >>] takes you to the TCP alarm notification notification setting window when an alarm occurs.
→10.11.1　Setting Up TCP alarm notification Notifications
[HTTP alarm notification]
Clicking [HTTP alarm notification setup >>] takes you to the setting window for HTTP alarm notification when an alarm occurs.
→10.11.2　Setting HTTP Alarm Notification
[MQTT alarm notifications]
Clicking [MQTT alarm notifications >>] takes you to the setting window for MQTT alarm notification when an alarm occurs.
→11.2.3　Set the MQTT

9.8[Radar Settings] for setting Radar obstruction detection

Set the Radar obstruction detection.
Set the sensitivity and detection time for an alarm when an obstacle is placed in front of the radar eye.
[obstruction detection]
[Rader obstruction detection]
Set whether to enable Radar obstruction detection.
[Enable]/[Disable]
[Detection sensitivity]
Sets the detection sensitivity for Radar obstruction detection.
[Very Low]/[Low]/[Medium]/[High]
[Detection time]
Sets the time until the Radar obstruction detection is activated.
[3s]／ [5s]／ [10s]／ [1min]
[Notice]

・Press [Set] to save and apply the [Radar obstruction detection] settings.