4Setting

4.1Opening the Settings pane from the PC

The main settings of the Security Radar are made in the settings pane.

[Important]

・The settings panel can be operated only by users with [1. Administrator] access level. For information on how to set the access level, refer to the user manual.

4.1.1How to display

1

Displays the Live image pages.
→3.2.2　About Live image pages

2

In the Live image pages

Click the button to display the settings panel.
Press again to hide it. For more information about this panel, see the following:
→4.1.3　About the settings panel screen

4.1.2How to operate

1

Click each tab in the Settings panel.

2

Enter each item on the setting page.

[Notice]

・Some items cannot be set depending on the display contents of the main area.

If the item you want to set is not displayed,

Click or use the scroll bar to display and enter the item you want to set.

3

When you have finished typing, confirm your [Set] by clicking on it. Other items are confirmed when a setting value is selected.

[Important]

・If there is more than one [Set], [Activate Account], or [Execute] button on the page, click the [Set], [Activate Account], or [Execute] button for each item.

4.1.3About the settings panel screen

Security Radar

1.

[Basic] tabbed page
Displays the [Basic] tabbed page. The [Basic] tab. You can configure settings such as the camera title and text.
→7　Advanced Settings Perform basic settings for this machine [Basic]

2.

[Stream numbers] tabbed page
Displays the [Stream numbers] tabbed page. Use the [Stream numbers] tabs to configure settings such as capture mode and streaming.
→8.3　Configuring Stream Settings [Video]

3.

[Quality] tabbed page
Displays the [Quality] tabbed page. The [Quality] tabbed page allows you to change settings such as image quality.
→8.4　Setting the image quality [Quality]

4.

[Zoom]Tab
Displays the [Zoom] tabbed page. The [Zoom] tab. Make zooming and other settings.
→8.4.3　Adjust the digital zoom

[Notice]
・Zoom is available only when using the camera.

5.

[Installation angle abnormality detection]Tab
Displays the [Installation angle abnormality detection] tabbed page. On the [Installation angle abnormality detection] tab. Configure settings for error detection at the installation angle.
→8.4.7　Setting Angle Error Detection

6.

[Audio] tabbed page
Displays the [Audio] tabbed page. On the [Audio] tabbed page, you can make settings related to audio.
→8.5　Setting sound [Audio]

7.

[Radar] tabbed page
Displays the [Radar] tabbed page. On the [Radar] tab. Configure settings related to the radar.
→9　[Radar] to set advanced radar settings

8.

[Alarm] tabbed page
Displays the [Alarm] tabbed page. On the [Alarm] tab. Configure settings related to alarms.
→10　Advanced Alarm Settings [Alarm]

9.

[Detailed setting] tabbed page
Displays the [Detailed setting] tabbed page. On the [Detailed setting] tabbed page, you can move to the advanced settings and configure the operator panel settings.
→7　Advanced Settings Perform basic settings for this machine [Basic]

[Notice]

・If the snapshot takes longer than a certain amount of time to take, for example, due to a network environment, the image may not be displayed.

・If the JPEG of the specified Image capture size cannot be obtained, the JPEG images of the Image capture size that can be obtained are displayed.
Therefore, if you take a JPEG image in a snapshot and browse it in the PC, it may differ from the displayed image size.

4.2Setting Radar [Radar]

On the [Radar] tab. Configure settings related to the radar. Check the Advanced Radar page for a detailed explanation of the settings and precautions when setting.
→9　[Radar] to set advanced radar settings

[Display settings]

Set the display settings of the radar.

・

[Radar Display Background Color]
Sets the background of the semi-circle image that shows the area of the radar irradiation in [White] and [Gray].

・

[Radar Display Transparency]
Set the transparency of the semi-circular images that indicate the radar area in [Off]-[90%].

・

[Show Track History]
Select from [Off] to [24h] to display the trajectory data in the radar window.

・

[Show Raw Radar Data]
Set the trajectory [Display] of the radar window with [On]/[Off].

[Notice]
・The point cloud data is the raw data before the radar is detected.

・

[Icon/Text Size]
Set the [Icon/Text Size] from the [Large], [Medium], and [Small].

・

[Show Object Type]
Set the [Show Object Type] in the [On]/[Off] of the [Display].

・

[Show Movement Speed]
Set the [Show Movement Speed] in the [On]/[Off] of the [Display].

[PTZ Linkage]

・

[Registered PTZ Display]
Set the [Registered PTZ Display] in the [On]/[Off] of the [Display].

・

[Display of important points]
Set the [Display of important points] in the [On]/[Off] of the [Display].

4.3Configuring settings related to installation angle errors [Installation angle error detection]

[Installation angle abnormality detection]

・

[Installation angle confirmation]
Set the [Installation angle of view confirmation] in the [Display].
You can correct the position of the camera while checking the deviation from the position when the installation angle is registered.

・

[Angle of view registration]
Set the [Execute] and [Delete] in the [Angle of view registration].

4.4Setting Alarm [Alarm]

The [Alarm] tab. Configure settings related to alarms.
See the [Alarm] section of the Advanced Alarms page for a detailed description of the settings and notes on the settings.
→10　Advanced Alarm Settings [Alarm]

[Alarm]

Set terminal operation and alarm items.

・

[Terminal 1]
Sets the operation of terminal 1.

・

[Terminal 2]
Sets the operation of terminal 2.

・

[Terminal 3]
Sets the operation of terminal 3.

・

[Radar obstruction detection alarm]
Set whether to use the [On] or [Off] for detecting radar jamming.
When set to [On], Radar obstruction detection is enabled. If you want to configure additional settings for Radar obstruction detection, you can do so in the [Radar obstruction detection alarm] section of the Advanced Alarms page.
→9.8　[Radar Settings] for setting Radar obstruction detection
The [Radar obstruction detection] tab of the Advanced Alarms page can be accessed from the Live Drawing link.

・

[VMD alarm]
Set whether to perform operation detection with [On]/[Off].
When [On] is set, all areas are specified in the operation detection area. If you want to specify an action detection area, you can configure it in the [VMD area] section of the Advanced Alarms page.
→10.5　[VMD area] to set operation detection
The [VMD area] tab of the Advanced Alarms page can be accessed from the Live Drawing link.

・

[Scene change detection (SCD) alarm]
Set whether to detect disturbance using [On]/[Off].
When set to [On], specifies the entire disturbance detection area. If you want to specify any disturbance detection area, configure it in the [SCD area] section of the Advanced Alarms page.
→10.7　[SCD area] for configuring disturbance detection
The [SCD area] tab of the Advanced Alarms page can be accessed from the Live Drawing link.

[Notice]

・[Radar obstruction detection alarm] is displayed only when [Radar] is selected.

・[VMD alarm] and [Scene change detection (SCD) alarm] are only displayed when the [Cameras] is selected.

・

[Audio detection alarm]
Use the [On] and [Off] buttons to specify whether or not sound detection is performed.
When set to [On], all sound-identifying objects are enabled. If you want to configure detailed settings for sound detection, you can do so in the [Audio detection] section of the Advanced Alarms page.
→10.9　[Audio detection] for configuring sound detection settings
The [Audio detection] tab of the Advanced Alarms page can be accessed from the Live Drawing link.

・

[Shock detection alarm]
impact detection.
When set to [On], impact detection is enabled. When setting the details of impact detection, set it in the [Impact Detection] tab of the alarm page of the detail setting.
→10.10　To set impact detection [Impact Detection]
The [Impact Detection] tab on the Advanced Alarm page can be accessed via the link in the live image.

・

[Alarm deactivation time]
Set the length of time that the detection operation is not performed after an alarm is detected. For example, if you set an alarm to send an email notification to your mobile device or tablet, this setting prevents you from sending too many emails.