3Operation

・The display of "\" which cannot be entered may differ depending on the model.

・Please enter it in upper case and lower case.

・Use at least three types of passwords: uppercase letters, lowercase letters, numbers, and symbols.

・Make sure that the password does not contain a user name.

・To set whether to display the date and time on the picture, use [Basic] of the Advanced Menu.

・Due to browser limitations, there is a limit to the number of browsers that can display video at the same time. If you attempt to display images in multiple browsers, the images may not be displayed.

・If you have configured [HTTPS] in [HTTPS]-[Connection] on the [Advanced] tab of the Network page, see the video in the support video page of our technical information website.<Control No. :P0002><Control No. :P0003>See also.

・If [User auth.] is set to [Off], the username/password entry window is not displayed prior to the Live image pages is displayed.

・The maximum number of users that can access the machine simultaneously is [Max. Users], which is the sum of the users receiving H.265 (or H.264) images and the users receiving JPEG images. However, depending on the setting of [Bandwidth control(bit rate)] [Bit rate per client*], the number of users that can be accessed may be limited to [Max. users]. If the maximum number of users that can be accessed is exceeded, the access exceeded message is displayed. When [Stream numbers]'s [Transmission type] is set to [Multicast], the second and subsequent users receiving H.265 (or H.264) images are not counted as accessed.

・[Maximum number of users] is 14.

・When [Stream transmission] is set to [On], the H.265 (or H.264) images are displayed according to the [Compression] setting. When set to [Off], displays JPEG images. Even if [Stream transmission] is set to [On], you can still view JPEG images. However, the image-refresh rate of JPEG images is limited as shown in the following tables

・The image-updating speed of JPEG images may be slower depending on the network-environment, PC performance, object, and number-of-accesses.

・The buttons and setting items displayed on the Live image pages can be changed according to the user privileges of the accessing user. User privileges are set in the [User auth.] of the [User mng.]. For more information, see the user manual.

・The design and layout of the screen may change.

・If the snapshot takes longer than a certain amount of time to take, for example, due to a network environment, the image may not be displayed.

・If the JPEG of the specified Image capture size cannot be obtained, the JPEG images of the Image capture size that can be obtained are displayed.

・JPEG streaming view

・Updating JPEG still image

・For PTZ cameras with auto-tracking On, the linked PTZ cameras may track different objects, depending on where they are shot. This phenomenon may be improved by performing calibration again. Refer to the user manual for details on auto tracking. Refer to the calibration guide for calibration.

・You can only configure [Layout], and [Camera display order] if you select [Dual] for [Camera to be displayed].

・When [Audio volume control mode] is set to [Adjust Mic input] in the Setting menu, you cannot control the volume cursors when using [Audio] or [Audio detection].

・When you restart the voice recorder, the earpiece volume changed by the volume cursor returns to the earpiece volume set in the [Audio] tab. in the Setting menu.

・The volume cursor cannot be finely adjusted on the screen. It operates in four stages.

・If you open more than one camera browser at the same time on the same PC, the audio of the camera browser that was opened later will not be heard. Please access and check one unit at a time.

・If the network communication is unstable, the voice reception may stop. In this case, On/Off the earpiece key to resume the voice reception.

・You can change the names of the [AUX], [Open], and [Close].
→10.3　[Alarm] whose AUX name is to be changed

・Alarm notification is not linked to alarm notification operations such as recording to a SD memory card or forwarding mail, so please check the respective operation settings.

・[Radar obstruction detection alarm] is displayed only when [Radar] is selected.

・[VMD alarm] and [Scene change detection (SCD) alarm] are only displayed when the [Cameras] is selected.

・Move the slider bar to move to the I-picture at the position where you moved it. For this reason, if a stream with [GOP control] set to [Advanced (fixed GOP 60s + 1s keyframe)] is recorded, the position that can be moved is set to 60 seconds apart.

・When audio data is recorded, the recorded data is played back as well, but the image and audio are not synchronized. Therefore, there may be slight discrepancy between the image and sound. When recording to a SD memory card, audio playback may be interrupted or the sound quality may drop.

・When playing back recorded data, the speed of updating live images and playing back images may be slow.

・If the [Audio transmission mode] in the [Audio] section of the Video/Audio page is set to [Off] or [Interactive(Half-duplex)], recordings are not played back.

・Depending on the [Stream recording]-[Max bit rate] setting of the SD memory card, the max. speed of high-speed playback varies.

・Recorded data is not played back during high-speed playback.

・Depending on the [Stream recording]-[Max bit rate] setting, the display may be delayed or the display time may be skipped during high-speed playback.

・If a stream with [GOP control] set to [Advanced (fixed GOP 60s + 1s keyframe)] is recorded, the playing position may return larger than 5 seconds depending on the duration of the recording of the I-picture.

・If a stream with [Advanced (fixed GOP 60s + 1s keyframe)] set to [GOP control] is recorded, the playing position may return depending on the duration of recording of the I-picture.

・You cannot operate the playback screen while downloading. Please operate after downloading is completed.

・If the [CANCEL] button is clicked during the download, the download is canceled. Videos downloaded prior to clicking [CANCEL] are saved to the PC.

・Since video data is saved in approximately 60 MB units of files, if the data exceeds the 60 MB, more than one file will be downloaded.

・H.264 videos saved in PC can be played back using Windows Media® Player, etc. However, we do not guarantee that the software will operate in any way.

・Depending on the status of the SD memory card or the Windows Media Player, you may not be able to play H.264 movies.

・For more information about playing back H.265 videos, see our Technical Info website.<Control No. :C0303>See also.