12[Schedule] to set advanced scheduling

On the Schedule page, schedule the following items.

・Radar detection stop


・Radar disturbance detection stop


・Alarm input enabled (terminals 1, 2, 3)


・Alarm input enabled (terminal 1)


・Alarm input enabled (terminal 2)


・Alarm input enabled (terminal 3)


・Operation Detection Enable


・Denial Detection Enable


・Image disclosure permission


・SD recording


・Sound Detection Enable


・Scene file


・Email sending permission


・Allow all alarms to be detected (only for Schedule 8 and Mie.


・[Automatic scheduling]Daytime: Picture 1/Night: Picture 2 (Schedule 1 only)


・Restart the Camera (Schedule 8 only)


・Impact Detection Enable


The scheduling page consists only of the [Schedule] tabs. Up to eight schedules can be set.
1
Select the Box of the week you want [Schedule] to schedule.
[Notice]

・For use with [Access permission], set [User auth.] on the [User auth.] tab to [On] and [Host auth.] on the [Host auth.] tab to [Off].
→ Refer to the user manual.


・For use with [SD memory recording], set [Recording format] on the [SD memory card] tab. Then, set [Save trigger] to [Schedule].


・Schedule 1 [<Automatic scheduling>Daytime: Image Quality 1/Night: Image Quality 2] and [Image Quality 1:Scene1 (Scene File 1)] [Image Quality 2:Scene2 (Scene File 2)] [Image Quality 3:Scene3 (Scene File 3)] [Image Quality 4:Scene4 (Scene File 4)] of Schedule 2 to 8 cannot be selected at the same time.
2
To specify the time, set the time by clicking [▼]. If you do not want to set the timezone, select the [24h] checkbox.
3
After completing the settings, clicking [Set] displays the settings at the bottom of the window.
[Notice]

・The colors displayed in Schedule 1 to Schedule 8 indicate the colors of the lines displayed in the schedule field at the bottom of the screen.


・When the operation mode of Schedules 1 to 8 is set to [Off], the operation of the following items is enabled at all times.


-Alarm input enabled (terminals 1, 2, 3)
-Alarm input enabled (terminal 1)
-Alarm input enabled (terminal 2)
-Alarm input enabled (terminal 3)
-Operation Detection Enable
-Denial Detection Enable
-Audio Detection Enable
-Image disclosure permission
-Impact Detection Enable
-Allow all alarms to be detected (only for Schedule 8 and Mie.

12.1How to set the schedule
1

In the [Schedule], select the Box of the week you want to schedule.
The day of the week is valid.


2

When specifying the time, specify the time by clicking [▼].
If you do not want to specify a timezone, tick [24h].


3

When you have finished configuring the settings, press [Set].
The settings are displayed at the bottom of the screen.

12.2How to delete a schedule

1

Uncheck the day of the week Box for which you want to remove the schedule.




2

When you have finished configuring the settings, press [Set].
The schedule for the selected day is deleted.

12.3How to set the image quality to be changed by the sunrise time and sunset time

1
You can set the time of Sunrise and Sunrise from [Set scenes linked to Sunrise and Sunrise time].
[To Scene Settings (Picture Adjust)]
This link is used to adjust the image quality for scene settings.
[Basic]
Links to basic settings for setting the timezone.
[Auto-schedule (Select Manual/ City)]
Select how you want to enter the [Latitude] [Longitude] [Altitude].
[Not use]:Operation mode [<Automatic scheduling>Daytime: Disables Image Quality 1 (Scene 1)/Night: Image Quality 2 (Scene 2)].
[Manual]：Manually enter the [Latitude] [Longitude] [Altitude].
[(city name)]:The city list is displayed. The [Latitude] [Longitude] [Altitude] of the selected city is entered and used for the [Automatic calculation result].
[Latitude]
Enter the latitude of the region of the camera you are using.
Input range:-180 to 180 (decimal number up to 6 decimal places)
[Longitude]
Enter the longitude of the region of the camera you are using.
Input range:-90 to 90 (Valid up to 6 decimal places)
[Altitude]
 Enter the local altitude for your location.
If it is blank, it is calculated by "10m".
Input range:-500 to 9000 (m)
[Automatic calculation result]
The sunrise and sunset times are calculated from the [Latitude] [Longitude] [Altitude]. If [Set] is not clicked, the calculated result is not reflected.
[Sunrise Time/Sunset Time Compensation]
Time correction is performed to the sunrise and sunset times of [Automatic calculation result] to determine the time to reflect the image quality.
Input range:-60 to 60 (minutes)
2

Press the [Set] key.


3
Configure the schedule settings.
For the setting method, refer to the following.
→12　[Schedule] to set advanced scheduling