1Introduction

1.1About the Security Radar Guide for Monitoring

This manual explains how to operate the machine software. It also explains how to calibrate the machine using the i-PRO Setup Tool (iCT).
For monitoring using a web browser in this documentMillimeter wave radarThis chapter explains operations and settings, but we recommend using the i-PRO Setup Tool (iCT) for various settings. I-PRO Setup Utility (iCT) on our Technical Info website<Control No. :C0133>See also.
[Note:]

・[used] in this document[<Control number: Cxxxx>] is the number used to search for the relevant information in our technical information website.
https://i-pro.com/products_and_solutions/en/surveillance/learning-and-support/knowledge-base/technical-information


・Screen photographs are used according to the guidelines of Microsoft Corporation.


・This document describes the operation when using the Japanese version of Google Chrome as a representative. For confirmation of the operation of the corresponding Web browser, please refer to our Technical Information Web site<Control No.: C0132>.

1.2Supported models and symbols of this manual

The supported models in this manual are listed in the model column of the table below.
Functions restricted by model in this manual indicate models that can be used with the following symbols and terminology. All models are compatible with functions for which this symbol is not used.
Symbol
Term
Model
[Security Radar radar]
Millimeter-wave radar for monitoring
WV-RD5500-CE/ WV-RD5500-CSE
[Notice]

・The camera part of the equipment is described as "Camera", and the radar part is described as "Radar".

1.3Abbreviations

The following abbreviations are used in this document:
MicroSDXC/microSDHC/microSD memory cards are referred to as SD cards or SD memory cards.
The Universal Plug and Play is referred to as UPnP ™ or UPnP.

1.4Disclaimer

●
This product is designed to obtain images for monitoring specific areas. This product does not prevent crimes by itself.
●
In no event shall we be liable for.
1.
Any incidental, special, or consequential damages or damages directly or indirectly arising in connection with the product
2.
Any and all failures or malfunctions caused by any disassembly, repair or modification of the product by the customer, whether or not caused by such disassembly or modification
3.
Any inconvenience, damage, or damage caused by the inability to display images due to any reason or reason, including product failure or malfunction
4.
Failure, inconvenience, damage, or damage caused by a system combined with a third-party device
5.
Compensation claims, claims, etc. arising from the use of monitored images or records made public by the customer for any reason (including use in a user-authenticated OFF) or the infringement of privacy by the subject person or entity
6.
The registered data is lost due to some reason (including when the product is initialized by forgetting the credentials such as repair, username, and password).

1.5Trademarks and registered trademarks

・
Trademarks and registered trademarks
-
Microsoft, Windows, Windows Media, Internet Explorer, Microsoft Edge and ActiveX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
-
Intel, Intel Core is a trademark of Intel Corporation or its affiliates in the United States and/or other countries.
-
Android and Google Chrome are trademarks of Google LLC.
-
Firefox is a trademark of Mozilla Foundation in the United States and elsewhere.
-
Other company and product names described in this manual are trademarks or registered trademarks of their respective companies.

1.6Notes on Networking

Since this machine is connected to the network, the following damage may occur.
1.
Leaks and leaks of information through the machine
2.
Unauthorized operation of this equipment by a malicious third party
3.
Malicious Third Party Interference or Stop the Instrument
To prevent such damage, take thorough network security measures, including the following measures, under the customer's responsibility.
●
Use this machine on a secure network using a firewall or the like.
●
When using this machine in a system to which a PC is connected, make sure that computer viruses and malicious programs are regularly checked for infection and disinfected.
●
To protect against unauthorized attacks, use user authentication, set user names and passwords, and restrict users who can log in.
●
To prevent image data, authentication information (username, password), alarm e-mail information, FTP server information, and DDNS server information from being leaked over the network, measures such as restricting access with user authentication are implemented.
●
Be sure to close all browsers after the administrator has accessed this machine.
●
Change the administrator password periodically. In addition, the authentication information (user name and password) shall be stored appropriately so as not to be accessed by third parties.
●
Do not install the server in a location where it can be easily destroyed.

1.7Notes on Use

When using this unit via the Internet
To prevent unintentional access by third parties,
Keep the user-authentication setting set to [On].
To ensure long-term stable operation
Avoid prolonged use in hot or humid places. Deterioration of the parts shortens the service life.
Improve the heat radiation at the installation site and make sure that the product is not exposed to direct heat.
Repeated power OFF/ON can lead to malfunction.
Handle with care
Do not drop the product or subject it to strong impact or vibration. Doing so may cause a malfunction.
Do not touch the dome cover directly
Dirt may deteriorate image quality.
Automatically restarts when an error is detected.
If an error is detected for any reason, the server automatically restarts. When the system is restarted, as when the power is turned onAbout 2 minutesThe operation cannot be performed.
Function for Detecting Operating Status
If abnormal operation is continued for more than 30 seconds during use due to the influence of external noise, etc., this unit automatically restarts and recovers from normal operation. Restart performs the same initial operation as when the power is turned on. However, if this occurs frequently, there may be a lot of external noise in the installation environment of this unit. Contact your dealer as soon as possible to prevent malfunction.
When a periodic screen skew occurs
If this unit is installed in a location that vibrates slightly (for example, near a vibrating device), the screen may expand and contract periodically, causing distortion.
This is a special phenomenon that occurs when a CMOS sensor is used as the image pickup device and is caused by the periodic movement of the screen and the image readout timing. This is not a malfunction of this unit. Re-check the installation conditions and ensure the stability of the machine to reduce this phenomenon.
We shall not be liable for any compensation for failure to properly record or edit images or loss of recorded or edited data due to a failure of this unit and the microSD memory card. Also, we shall not be liable for any direct or indirect damages caused thereby. The same shall apply when the machine is repaired.
About CMOS sensors
●
If there is a bright area such as spotlight in a part of the picture, the color filter inside the CMOS sensor may deteriorate and the area may be discolored.
●
When a fast-moving object is displayed, objects across the screen may bend at an angle.
Maintenance
Turn off the power before performing this procedure. Doing so may cause injury.
Do not sprinkle or use bengin, thinner, or any other organics. The case may become discolored. When using a chemical cloth, follow the precautionary statements.
Do not loosen or remove screws not instructed in the instruction manual.
Cleaning the Dome Cover
If the dome cover is dirty, clean it with a lens cleaning paper (for cleaning the camera and glasses).
This product is licensed under AVC Patent Portfolio License and is not licensed except for your personal and non-commercial use for the actions described below.
When the equipment is transferred or disposed of
The contents of information recorded on this machine and the contents of information recorded on the storage medium used with this machine may correspond to "personal information". If this equipment is disposed of, transferred, repaired or otherwise handed over to a third party, it must be handled with care. When discarding a storage medium, it is recommended to physically destroy it after deleting it with a PC.
In addition, delete the device or user information registered in the external service or application that uses this machine.
Connecting to the Internet
This handset cannot connect directly to telecommunications lines (including public radio LAN) of telecommunications carriers (mobile communications companies, fixed-line telecommunications companies, Internet providers, etc.). When connecting this unit to the Internet, be sure to connect it via a router or other device.
Protection of personal information
Information that can be distinguished by a person shot by a system using this machine corresponds to "Personal Information" defined in the "Act on the Protection of Personal Information"* Handle video information properly in accordance with laws.

*Please refer to [Cases that Apply to Personal Information] in the "Guidelines for the Protection of Personal Information (General Rules)" of the Personal Information Protection Committee.
About Routers
When using a router to connect this unit to the Internet, use a broadband router with a port forwarding function (NAT, IP masquerading). For an overview of the port forwarding function, refer to the user manual.
About Time Setting
The time must be set before operation of this machine starts. For information on setting the time, see the user manual.