Security Radar Guide

  • 1Introduction
    • 1.1About the Security Radar Guide for Monitoring
    • 1.2Supported models and symbols of this manual
    • 1.3Abbreviations
    • 1.4Disclaimer
    • 1.5Trademarks and registered trademarks
    • 1.6Notes on Networking
    • 1.7Notes on Use
  • 2Introduction
    • 2.1About calibration
  • 3Operation
    • 3.1Initial Settings
    • 3.2Viewing Images from a PC
    • 3.3About Live image pages in Security Radar
    • 3.4Operation when an alarm occurs
    • 3.5Playing back images stored on a SD memory card
  • 4Setting
    • 4.1Opening the Settings pane from the PC
    • 4.2Setting Radar [Radar]
    • 4.3Configuring settings related to installation angle errors [Installation angle error detection]
    • 4.4Setting Alarm [Alarm]
  • 5Displaying the Advanced Settings menu of the Security Radar from the PC
    • 5.1How to display
    • 5.2How to operate
    • 5.3Camera Settings Menu Screen
  • 6Advanced settings
    • 6.1To set event operation [Event Operation]
  • 7Advanced Settings Perform basic settings for this machine [Basic]
    • 7.1Perform basic settings [Basic]
    • 7.2Setting an SD Memory Card [SD Memory Card]
    • 7.3Setting an overlay image [Overlay image]
  • 8Configuring Advanced Image and Audio Settings [Video/Audio]
    • 8.1Setting the imaging mode [Video]
    • 8.2Setting JPEG images [Video]
    • 8.3Configuring Stream Settings [Video]
    • 8.4Setting the image quality [Quality]
    • 8.5Setting sound [Audio]
  • 9[Radar] to set advanced radar settings
    • 9.1[Radar Settings] for setting units
    • 9.2[Radar Settings] for configuring basic radar settings
    • 9.3[Radar Settings] for configuring radar-related settings
    • 9.4[PTZ Linkage] for checking the connectivity of registered PTZ
    • 9.5Setting PTZ camera-control method [PTZ Linkage]
    • 9.6Setting Up PTZ Camera-Tracking [PTZ Linkage]
    • 9.7[Radar detection] for setting radar detection
    • 9.8[Radar Settings] for setting Radar obstruction detection
  • 10Advanced Alarm Settings [Alarm]
    • 10.1[Alarm] for setting alarm operations
    • 10.2[Alarm] for setting pins
    • 10.3[Alarm] whose AUX name is to be changed
    • 10.4[Alarm] for setting interlocked alarm operation
    • 10.5[VMD area] to set operation detection
    • 10.6[VMD area] to set operation detection area
    • 10.7[SCD area] for configuring disturbance detection
    • 10.8[SCD area] to set the disturbance detection area
    • 10.9[Audio detection] for configuring sound detection settings
    • 10.10To set impact detection [Impact Detection]
    • 10.11[Transmission] for setting the alarm notification
  • 11Advanced Networking Settings [Network]
    • 11.1[Network] to set up networking
    • 11.2[Advanced] for advanced networking settings
  • 12[Schedule] to set advanced scheduling
    • 12.1How to set the schedule
    • 12.2How to delete a schedule
    • 12.3How to set the image quality to be changed by the sunrise time and sunset time
  • 13Other
    • 13.1System log display
    • 13.2Troubleshooting
    • 13.3SD Memory Card Directory Structure
  • Calibration guide
    • 1. Overall flow
    • 2. Simulation with System Design Tool
    • 3. Preparing for i-PRO Configuration Tool
    • 4. Radio interference avoidance
    • 5. Security Radar calibration settings