3Basic settings

The procedure for configuring Basic settings is as follows.
1.
Camera adjustment
3.1 Camera adjustment
2.
Checking the people detection status
3.2 Checking vehicle detection status
3.
Check the best shot image and attribute information
3.3 Check the best shot image and attribute information
1.
Open iCT and click "Ext.Software Management" in the left menu.
2.
Click "App Settings".
3.
From the device list, check the camera for which you want to set up the extension software.
4.
Select "AI Vehicle Detection" from the "Extension Software" pull-down menu on the right side of iCT.
5.
Click the "setting/confirmation" button.
6.
Click Camera.
1.
Click the Settings icon in the top right corner.
2.
Click "Image quality" and "Zoom" to adjust the camera. Adjust the following items:
-
Adjusting the brightness
-
White balance adjustment
-
Adjusting the size of the subject in the field of view
-
Adjusting the focus
- If "Super Dynamic" is set to "On", color shifts may occur.
- Some cameras may require manual zoom/focus adjustment.
While the vehicle is being viewed through the camera, check the following points in the video display area of the settings screen.
-
Check if vehicle are detected
-
Whether the detected vehicle is the recommended size for attribute identification
- For recommended sizes, see the following URL:
Technical Information <C0320>
1.
Click "Open" on the "Bestshot Confirmation " on the settings screen.
2.
When the Best Shot confirmation screen appears, click "On."
The best shot image will be displayed.
a.
Best shot image
b.
Best Shots Overview
-
The time when the best shot was taken
-
Whether the best shot image size of the vehicle is within the recommended value
"Size OK": Within recommended value
"Size NG": Outside the recommended value
-
Vehicle size
-
Detection Score
c.
Attribute information details
-
car type(Truck/Bus/SUV/Van/Sedan/Pickup truck/Motorcycle)
-
car color(Black/Brown/White/Gray/Green/Red/Blue/Yellow/Purple/Pink)
d.
Best Shot details
-
Recommended size
-
Detection Size