1Introduction

This manual explains how to register the function expansion software/AI Vehicle Detection application AI Vehicle Detection (hereinafter referred to as "this product") to an AI network camera (sold separately, hereinafter referred to as "camera"), the settings required before starting operation, and how to operate it during operation. Since this product is intended to be used after being registered with the camera, be sure to also read the instruction manual for your camera before using it. Also, some of the setting screens shown in this manual may differ depending on the model of your camera and the version of i-PRO Configuration Tool (hereinafter referred to as "iCT").

1.1Product Overview

This product is software for more convenient use of the camera. You can use the following functions by installing the product on the camera.

●

The best shot determination function and attribute identification function of the vehicle are used to notify the vehicle information to the i-PRO Active Guard.

・This product is required for each camera.

・Refer to the following URL for information on the compatible models and software versions of this product.

→Equipment compatibility <C0103>

※<Control number: Cxxxx> The number used when searching for the appropriate information on our support website.

1.2Features

1.2.1AI Vehicle Detection

●

This product identifies the attributes of detected vehicles, extracts the best shot image and attribute information, and sends the best shot image and attribute information to the i-PRO Active Guard.

●

This product has the following features:

-

It can identify two items and 17 types of vehicle attributes.

-

You can send up to 20 best shot images and attribute information.

-

To prevent false detection, you can set up to eight mask areas.

1.3Before using this product

The following cases may cause difficulty in detecting a subject or motion, or cause lost or false alarms or reduce measurement accuracy.

-

The image brightness is low, such as at night.

-

When the input video is black and white.

-

The white balance of the video is incorrect.

-

There is backlighting in the video.

-

There is strong external light in the video.

-

The subject is moving too fast.

-

Subjects are subject to uneven lighting, with some parts illuminated and some parts shaded.

-

The subject is too small or too large.

-

Part of the subject is hidden.

-

The subject is not in focus.

-

The footage shows signs with vehicles and motorcycles on them.

-

There are too many subjects.

-

Multiple vehicles intersect or crowd together.

-

There are water droplets or dirt on the camera dome or lens.

-

The camera is shaking.

-

The weather is extremely bad.

Other cautions are explained below.

-

If there are factors that cause false detections on the screen, you can reduce false detections by setting a mask area.

-

The message IDs (decimal numbers) for custom alarm notifications are: Matching List Alarm List 1: "130", List 2: "131", List 3: "132", List 4: "133".

-

Please update to the latest firmware to prevent unauthorized access by third parties, infringement of privacy and portrait rights, information leaks, and unauthorized operation.

-

We shall not be liable for any inconvenience, damages or losses incurred as a result of setting up this product.

-

We shall not be held responsible for any accidents or damages that may occur.