2Preparation

The flow to operation is as follows.

①

Check compatible models and software versions.
→2.1　Check compatible models and software versions

②

Install the product.
→2.2　Install the product

③

Configure the required settings.
→3　Basic settings

2.1Check compatible models and software versions

Check the compatible model and software version in the following URL.
→Equipment compatibility<C0103>

2.2Install the product

Download the product and install it on your camera according to the following procedures.

1.

Access the download site of the product, download the [AI Privacy Guard], and save it to a PC.

Refer to the following for the download site of this product.
→Click here for downloads

Do not use spaces or double-byte characters in the name of the destination directory.

2.

Go to the [Setup] menu > [Ext. software] page > [Software mng.] tab.

Check the [Remaining ROM] [Remaining RAM]. If you are running out of space, uninstall another installed extension software. For the uninstallation procedure, refer to the operation manual and settings of the camera.

3.

Click [Browse...] to specify the [AI Privacy Guard] that was downloaded.

4.

Make sure that [Install new Ext. software] is selected and press [Execute].

・

Installation of the software starts. When the installation is completed, "AI Privacy Guard" will be added to the list of extended software and the "Software mng." screen. (The names may be partially omitted.)

・Do not turn off the camera during installation.

・Do not perform any operation during installation until the installation is completed.