4HTTP transmission Settings(HTTP transmission tab)

Sets the transmission destination (1-4) and the transmission interval for sending occupancy information via HTTP.

■Transmission destination 1/2/3/4
Occupancy information can be sent individually to up to 4 addresses.
The setting items for the four transmission destinations are the same.

[Transmission]
Check it to send information.

Default setting: Unchecked

[Transmission address]
Sets the IP address or host name of the HTTP server for transmission.

Maximum allowable number of characters: 63

Allowable characters: Half-width alphanumeric characters; half-width symbols [.], [_], [-]

Default setting: a blank space

[Delete]
Click it to restore [Transmission address] to the blank state.

[Transmission path name]
Enter the path name of the transmission destination.

Maximum allowable number of characters: 128

Forbidden characters: Half-width symbols “"”, “&”, “;”

Default setting: /AIOccupancyDetectionApp

[Delete]
Click it to restore [Transmission path name] to the blank state.

[SSL]
Selects whether to use SSL for transmission.

Default setting: On

[Transmission port number]
Sets the port number of the transmission destination.

Allowable port number: 1-65535

Default setting: 443

[Username]
Enter the user name for authentication with the transmission destination.

Allowable number of characters: 0-63

Forbidden characters: Half-width symbols “"”, “&”, “:”, “;”, “\”

Default setting: a blank space

[Password]
Enter the password for authentication with the transmission destination.

Allowable number of characters: 0-63

Forbidden characters: Half-width symbols “"” and “&”

Default setting: a blank space

[Transmission interval]
Select the time interval for transmission.

5sec, 10sec, 15sec, 1 min, 5 min, 10 min, 15 min, 30 min, 60 min

Default setting: 5 min

[Set]
Click it to enable the setting of transmission destination 1-4.