3Basic settings

The basic setting procedure is as follows.
1.
Open the settings screen
→3.1 Open the settings screen
2.
Camera adjustment
→3.2　Camera adjustment
3.
Camera adjustment
→3.3　Checking matching accuracy
4.
Detailed setting
→4　Detailed setting

3.1Open the settings screen
1.
Open iCT and click "Ext.Software Management" in the left menu.
2.
Click "App Settings".
3.
From the device list, check the camera for which you want to set up the extension software.
4.
Select "AI Face Detection" from the "Extension Software" pull-down menu on the right side of iCT.
5.
Click the "setting/confirmation" button.

3.2Camera adjustment

Adjust the camera settings from the AI Face Detection application settings screen.
1.
Click the AI Face Detection application.
2.
lick the "Display" button on the settings navigation screen.
3.
Set the adjustment parameters, image quality, zoom/focus/depression angle according to the instructions on the settings navigation screen.
- For recommended sizes, see the following URL:
→Technical Information　<C0320>
Step1
Step2
Step3
Step4
4.
On the Setup Complete screen, click the "Finished" button.

3.3Checking matching accuracy
1.
Register a face image.
(1)
Select either the best shot image received from the camera or an image file on your PC as the face image.
2.
Press the Start button to begin receiving best shots from the camera.
3.
The received best shot image will be displayed. The following information will also be displayed:
(1)
- Time of capture
- Matching score
- Face size (width)
4.
The matching results will be displayed.