1Introduction

This manual explains how to register the function extension software/AI Face Detection application(hereinafter referred to as "this product") to an AI network camera (sold separately, hereinafter referred to as "camera"), the settings required before starting operation, and how to operate it during operation. Since this product is intended to be used after being registered with the camera, be sure to also read the instruction manual for your camera before using it. Also, some of the setting screens shown in this manual may differ depending on the model of your camera and the version of i-PRO Configuration Tool (hereinafter referred to as "iCT") you are using.

1.1Product Overview

This product is software for more convenient use of the camera. You can use the following functions by installing the product on the camera.

●

The best shot determination function for people's faces and feature extraction function notify i-PRO Active Guard of the person's face information.

・This product is required for each camera.

・Refer to the following URL for information on the compatible models and software versions of this product.

→Equipment compatibility <C0103>

※<Control number: Cxxxx> The number used when searching for the appropriate information on our support website.

1.2Features

1.2.1AI Face Detection

●

This product extracts face feature of detected person and transmits the best-shot images and the feature value to the i-PRO Active Guard.

●

This product has the following features:

-

Extracts person’s face feature.

-

Transmits best-shot images of up to 8 people and feature value.

-

To prevent false detection, you can set up to eight mask areas.

1.3Before using this product

The following may cause detection failure, false detection or false attribute classification.

-

The image brightness is low, such as at night.

-

There is backlighting in the video.

-

There is strong external light in the video.

-

The subject is moving too fast.

-

Subjects are subject to uneven lighting, with some parts illuminated and some parts shaded.

-

The subject is too small or too large.

-

Part of the subject is hidden.

-

The subject's face is not facing the camera.

-

The subject is not in focus.

-

Posters with dolls and people appear in the footage.

-

There are too many subjects.

-

Multiple people crossing or crowding together.

-

There are water droplets or dirt on the camera dome or lens.

-

The camera is shaking.

-

The weather is extremely bad.

Other cautions are explained below.

-

If there are factors that cause false detections on the screen, you can reduce false detections by setting a mask area.

-

Please update to the latest firmware to prevent unauthorized access by third parties, infringement of privacy and portrait rights, information leaks, and unauthorized operation.

-

We shall not be liable for any inconvenience, damages or losses incurred as a result of setting up this product.

-

We shall not be held responsible for any accidents or damages that may occur.