4Demo screen

The AI motion detection and count function have Demo screen display buttons, respectively, and the demo screen can be displayed by clicking on them.

4.1AI motion detection
[Setup] button
Click to show/hide configuration items displayed on the demo screen.
Setting button
[Detection frame and set area/line display]
Select the detection results to be displayed on the demo screen.
AI motion detection (Detection setting 1): Displays a demo screen with the detection results set in AI motion detection (Detection setting 1)
AI motion detection (Detection setting 2): Displays a demo screen with the detection results set in AI motion detection (Detection setting 2)
Count function: Displays a demo screen with the detection results set in the Count function.
[Display score]
When the switch is set to [On], the detection score is displayed in the upper left of the detection frame.
[**] may be displayed when the detection score is below the threshold.
[Measure score]
When set to [On], the maximum and minimum values of the detection score are measured and the measurement results (MAX/MIN) are displayed on the demonstration screen. When set to [Off], measurement is stopped.
[Display speed]
This is only displayed when [Detection frame and set area/line display] is set to AI motion detection (Detection setting 1) or AI motion detection (Detection setting 2).
When the switch is set to [On], the estimated speeds of people, vehicles and motorcycles are displayed in the upper left corner of the icon.
If [Speed setting] is set to [Off], it is not displayed. If the estimated speed is too small, it may not be displayed.
［Display latitude / longitude］
This is only displayed when [Detection frame and set area/line display] is set to AI motion detection (Detection setting 1) or AI motion detection (Detection setting 2).
When the switch is set to [On], the estimated speeds of people, vehicles and motorcycles are displayed in the upper left corner of the icon.
If [Latitude / longitude sending settings] is set to [Off], it is not displayed.
［Threshhold setting］
Human identification threshold: Detects when the MIN of [Mesure score] of a human exceeds this threshold.
Vehicle identification threshold: Detects when the Min of [Mesure score] of a vehicle exceeds this threshold.
Bicycle identification threshold: Detects when the Min of [Mesure score] of a bicycle exceeds this threshold.
[Icons]
If the score is [On], the Detection object icon is displayed in the upper left corner of the detection frame.
[Detection area]
The set Detection area is displayed in color.
Area 1: white, Area 2: blue, Area 3: green,
Area 4: red, Area 5: yellow, Area 6: light blue,
Area 7: purple, Area 8: pink
Solid Line: Areas set to [On]
Dashed line: Areas set to [Off]
[Detection line]
The set detection line is displayed in color.
Line 1: white, Line 2: blue, Line 3: green,
Line 4: red, Line 5: yellow, Line 6: light blue,
Line 7, purple; Line 8, pink
Solid Line: Lines set to [On]
Dashed line: Lines set to [Off]
[Direction label]
Cross line detection displays the orientation (Cross line detection: A, B count function: In, Out) in which the number of people is counted.
[Detection frame]
When the target object is detected, a frame is displayed.

Red frame:Displays the object in the area where the alarm was generated and the object crossing the line in the setting direction.


Blue box: Displays detected objects.
[White dots in detection frame]
Shows the foot position of the human's detection frame.

4.1.1Demo screen when alarm suppression start area is set to [On]
For details on setting the alarm suppression start area, see below.
→3.5.9　Advanced setting
[Alarm Suppression Start Area]
Displays the detection area that will trigger alarm suppression.
[Alarm Suppression Duration]
Displays the time until alarm suppression is released/alarm suppression time (set time).
The alarm suppression duration will be displayed if a detection occurs in the alarm suppression start area and the detected object then moves outside the alarm suppression area.As long as the detected object remains within the alarm suppression start area and detection continues, alarm suppression itself will continue, but the alarm suppression duration will not be displayed.

4.2Count function
[Number of counts] (count function only)
The number of objects counted in the set direction is displayed in color for each line.
Line 1: white, Line 2: blue, Line 3: green,
Line 4: red, Line 5: yellow, Line 6: light blue,
Line 7, purple; Line 8, pink
The speed and latitude / longitude displayed on the demo screen is the estimated values calculated with this product. This may differ from the actual values.

・Use Mozilla Firefox, Google™ Chrome™, and Microsoft Edge to display the demo screen.
It does not support Internet Explorer.


・Only one browser can display the demo screen. Simultaneous access by multiple browsers is not supported.
Simultaneous display of AI-VMD and count function demo screens is not supported.


・The detection frame cannot be displayed simultaneously on the setting screen/demo screen of AI-VMD/count function.


・If [On] is selected for data encryption, no image is displayed on the demo screen.


・If used at the same time as the other extension software, the position of the detection frame may be misaligned with the human on the demo screen.


・It is not recommended to use the demonstration screen in actual operation because it is intended for demonstration.


・If the score display is set to [Off], the score measurement cannot be set to [On].