2Preparation

　
The flow to operation is as follows. This chapter describes ①, ②, ③, and ④.
①
Check compatible models and software versions
→2.1　Check compatible models and software versions
②
Install the product
→2.2　Install the product
③
Configure the required settings.
→3　Basic settings
④
Start of operation
→6　Operation
When using a camera with this product pre-installed, refer to the following pages.
→AI Video Motion Detection

2.1Check compatible models and software versions

Check the compatible model and software version in the following URL.
→Equipment compatibility<C0103>

2.2Install the product

Download the product and install it on your camera according to the following procedures.
1.
Access the download site of the product, download the [AI Video Motion Detection], and save it to a PC.
Refer to the following for the download site of this product.
→Click here for downloads
Do not use spaces or double-byte characters in the name of the destination directory.
2.
Go to the [Setup] menu > [Ext. software] page > [Software mng.] tab.
Check the [Remaining ROM] [Remaining RAM]. If you are running out of space, uninstall another installed extension software. For the uninstallation procedure, refer to the operation manual and settings of the camera.
3.
Click [Browse...] to specify the [AI Video Motion Detection] that was downloaded.
4.
Make sure that [Install new Ext. software] is selected and press [Execute].
・
Installation of the software starts. Upon completion of the installation, [AI-VMD] will be added to the extended software list and the [Software mng.] screen.

・Do not turn off the camera during installation.


・Do not perform any operation during installation until the installation is completed.