1Introduction

This manual explains how to register extension software AI video motion detection application WV-XAE200WUX (hereinafter referred to as this product) with AI network cameras (sold separately, hereinafter referred to as camera), the settings required prior to starting operation, and how to operate AI network cameras. The camera must be registered before use. Be sure to read the camera's instruction manual when using the camera. The settings shown in this manual may differ depending on the camera model used and the i-PRO Setting Tool version (hereinafter referred to as iCT).

1.1Product Overview

This product is software for more convenient use of the camera. You can use the following functions by installing the product on the camera.
●
Count with the [Cross Line Counting function] that counts the number of human, cars (four-wheel vehicles),
motorcycles and bicycles (two-wheel vehicles) that cross a line.
●
Activate an alarm with the "AI-VMD function (hereinafter, AI-VMD)" that automatically identifies the detected moving
bodies.

・This product is required for each camera.


・Refer to the following URL for information on the compatible models and software versions of this product.


→Equipment compatibility <C0103>

※<Control number: Cxxxx> The number used when searching for the appropriate information on our support website.

1.2Features

1.2.1Cross Line Counting function

It counts human, vehicles (four-wheel vehicles), motorcycles and bicycles (two-wheel vehicles) crossing a line, and
can provide statistics on the count data.

1.2.2AI-VMD

●
With AI technology, AI-VMD determines whether the detected moving body is a vehicle (four-wheel), a motorcycle or a
bicycle (two-wheel), or a human.
●
AI-VMD can detect moving bodies in the four modes below and then alarms occur.
・
INTRUDER: Detects if moving bodies intrude into the predetermined area
・
LOITERING: Detects if moving bodies loiter in the predetermined area beyond the fixed time.
・
DIRECTION: Detects if moving bodies move in the direction you specified within the predetermined area.
・
CROSS LINE: Detects if moving bodies cross the predetermined line in the direction you specified.
Below are examples of each detection. The example of DIRECTION is a case where bicycles are set as the detection
objects.
INTRUDER: An alarm occurs when moving bodies are detected  intruding into the predetermined area
DIRECTION: An alarm is generated when the movement of a moving object in the specified direction is detected in the specified area.
LOITERING: An alarm occurs when moving bodies are detected  intruding into the predetermined area.
CROSS LINE: Alarm is generated by detecting that the set line has exceeded the specified line.

1.3Before using this product

The following cases may cause difficulty in detecting a subject or motion, or cause lost or false alarms or reduce
measurement accuracy.
●
There is no difference in brightness between the background and moving subject.
●
Image brightness is low, such as at night.
●
The subject moves too fast or too slowly.
●
The subject is too small or too large.
●
Light conditions, such as outdoors and windows, are easily changed.
●
External light such as sunlight and car headlights enters.
●
Fluorescent light flickers.
●
The dome of the camera is stained with water droplets.
●
The subject moves straight toward the camera.
●
Too many moving objects.
●
The camera is swinging.
●
The weather is extremely bad.
●
Multiple people intersect.
●
Shadows fall into the Detection area.
●
The subject is out of focus.
●
The subject is blurred.
●
The subject is moving toward or away from the camera at the periphery of the image.
●
Only a part of the subject is hidden in the privacy zone or other subject. (Reference: Less than two-thirds of vehicles are visible.)
●
Too many subjects. (Guideline: Accuracy may deteriorate if the number exceeds 40 (units).
●
Multiple subjects intersect.
●
Strong external light is inserted to create a subject and other shadows.
●
Illumination fluctuates when the lamp is turned on or off.
●
Vehicle signs and posters are displayed.
●
Vehicles come into the glass.
●
If the vehicle is equipped with XX, such as a tow truck. (e.g. vehicle towing, boat etc.)
●
The human lies or falls.
●
The human is short. (Reference: 120cm or less)
●
The human has a big baggage. (e.g., pushing carts, baby strollers, wheelchairs)
●
The human is not walking independently. (e.g. an infant)
●
Light conditions, such as near windows, are subject to change.
●
Animals and insects are seen.
●
A human's poster and mannequin are shown.
Other cautions are explained below.
●
If the camera [Data Encryption] is on, the camera image may not be displayed on the camera image screen or demonstration screen.
●
If there are false detection factors in the screen, such as trees shaking, roadway (passing by automobile), or water surface (reflected light), you can reduce false detection by setting the mask area.
Refer to the following page for the mask area settings.
→3.3　AI motion detection setting
●
When setting the AI-VMD, check the operation during daytime and nighttime after setting the area according to the installation status of the cameras and the expected movement of the subject.
Refer to the following pages for area settings.
→3.3　AI motion detection setting
●
If the camera's image angle changes after turning on the power, after changing the camera settings, the camera may detect incorrectly for approximately 1 minute.
●
The alarm is repeatedly activated every specified time while the target is on the screen. Thus, e-mails and proprietary alarms are also notified at intervals (see [Alarm deactivation time] on the [Alarm] tabs in the Camera Settings window).
●
The message ID (Decimal number) of TCP alarm notification is "50" for Intruder alarm, "51" for Loitering alarm, "52" for Direction alarm, "56" for Croee line alarm, "61" for Intruder alarm stop, "62" for Loitering alarm stop.
●
Based on the camera which is used, the transmission frame rate is limited when using AI-VMD. Refer to the following
URL for details.
→Equipment compatibility<C0103>
●
i-PRO Co., Ltd. shall not be responsible for any inconveniences, losses, or damages caused by the settings of AI-VMD
or as a result thereof.
●
AI-VMD is not for preventing theft, disaster, etc. i-PRO Co., Ltd. shall not bear any liabilities whatsoever for any accidents or losses.