6Aggregation function

This section describes the The Extension Software (Number of people count data confirmation software) of the iCT for acquiring and aggregating counts by Cross Line Counting and Area Counting. Number of people count data confirmation software is based on the assumption that this product is registered with the camera and used.

6.1Open the setting/confirmation screen
1.
Select Menu [Ext. Software Management]-> Sub-menu [Application Settings].
2.
Check the check boxes for the cameras to be downloaded and check that the data such as the part number and [MPR ID] are displayed.
3.
Select [Check count data] in [Ext. software].
4.
Clicking Settings/Confirmation opens the [Number of people count data confirmation software] Settings window.

・Only cameras with this product installed can open the setting/confirmation screen.


・When using the aggregation function, set the [Measurement result saving interval] to 1 hour.

6.2Obtain and aggregate count data

Number of people count data confirmation software can perform the following three operations on cameras where this system is installed.
・
Acquisition of data
→6.2.1　Acquisition of data
・
Preparation of Form
→6.2.2　Preparation of Form
・
Editing camera ID/group
→6.2.3　Editing camera ID/group

6.2.1Acquisition of data
Acquires the count data of the number of people from the camera. Select the check box for the target camera and select [Acquire data] to open the Acquisition data setting screen.
[Start]
Sets the start date of the period for which data is to be acquired.
[End]
Set the end date of the period for which you want to acquire data.
[Create a form after acquisition]
When the check box is checked, the form is output after the data acquisition starts. Refer to the following page for the report output.
→6.2.2　Preparation of Form
Initial value: unchecked
[Start] buttons
Press [Start] to view the progress window and verify that the acquisition is completed successfully.

6.2.2Preparation of Form

The aggregated data of the count data obtained from the camera by [Retrieve data] is represented in tables and graphs and saved in Excel format. Check the check box of the target camera and select [Create report] to open the Create Report screen.
[Exporting the entry / exit data]
In the target detection line, select which number of people counted in the entrance direction or in the exit direction to output the report.

[Export both the entry / exit data], [Export the entry data only], [Export the exit data only]


Default: [Export both the entry / exit data]
[Export the number of staying]
When the check box is checked, the number of visitors is output.
Initial value: unchecked

・The [Exporting the entry / exit data] and [Export the number of staying] settings do not apply to outputting Area Counting counts.


・In Cross Line Counting, when multiple lines are set up, the count data outputs the total value in the form. For outputting only the count data of Line 1 in the following file<MultiLine>Edit the tag. However, it must be rewritten prior to starting iCT.
C:\Users\(Windows users)\Desktop\i-PRO Configuration Tool\#PeopleCount\Storage\Project000\KazoolDevData.xml
Initial value:<MultiLine>1,1,1,1,1,1,1,1,1,1,1,1</MultiLine>
When only the count data of Line 1 is output in the form:<MultiLine>1,0,0,0,0,0,0,0,0,0,0,0</MultiLine>
[Data output target]
Outputs a file by selecting it from the daily report (one hour) or monthly report (one day) of the specified year, month, and day.
Default: [output unit] [Daily], ([Year/Month/Day/Hour]) from 0:00 to 24:00 on the day of setup
[Compare with the selected date]
When the check box is checked, the data to be compared can be output at the same time.
Initial value: unchecked
[Start] buttons
When [Start] is pressed, the progress window is displayed to confirm that the report output is completed successfully.
The name and contents of the form sheet are as follows.
Sheet name
Description
[Total]
Sum of Cross Line Counting groups are recorded. At the bottom of the table are graphs.
[Group name]
The sum of the Cross Line Counting's camera IDs is recorded. At the bottom of the table are graphs.
[Area_Total]
Sum of Area Counting groups are recorded. At the bottom of the table are graphs.
[Area_(group name)]
The sum of the Area Counting's camera IDs is recorded. At the bottom of the table are graphs.
[Err]
Error details for each time zone are shown on the top sheet of each camera.
The location for storing data can be specified in the [Option] [Save in] window.
Default: C:\Users\(Windows users)\Desktop\ i-PRO Configuration Tool
The outputted form is saved in the [#PeopleCount\Report] folder immediately below the data storage location specified in the [Save in] screen of the [Option].
Default: C:\Users\(Windows users)\Desktop\i-PRO Configuration Tool\PeopleCount\Report

*File name (for daily report)


YyyyMMdd_HHmmss_Result_PeopleCount.xlsm
(For monthly reports, "dd" will be replaced by "_"

6.2.3Editing camera ID/group

[Edit camera ID / group] changes the camera IDs and groups of registered cameras. Select the check box for the target camera and select [Edit camera ID / group] to open the Edit Camera ID/Group window.
[Group]
Set the group name of the target camera.
Initial value: blank
[Camera ID]
Set the camera ID of the target camera.
Initial value: blank
[Save] buttons
Press [Save] to save the settings.

6.2.4Example of Form Format

When the camera is connected to one camera and the group is set to [group] and [cameraID] is set to [cameras ID], the report is output as follows.
[Total Sheet] Example Table
<Area_group sheet> Example Tables: Area Counting prints the mean count per hour.
[Total Sheet] Example of graph
<Area_group sheet> Example of graph
Example of Err Sheet: If the specified period of data does not exist in the camera or cannot be connected to the camera, the [Error Details] will appear as [File not present].