5Demonstration screen

AI-VMD, Cross Line Counting and Area Counting/Occupancy Detection each have Demo screen display buttons and can be clicked to display the demo screen.
AI-VMD
Area Counting/Occupancy Detection
Cross Line Counting
[Detection area]
The set Detection area is displayed in color.
[Area 1]: white, [Area 2]: blue, [Area 3]: green, [Area 4]: red,
[Area 5]: yellow, [Area 6]: light blue, [Area 7]: purple, [Area 8]: pink

Solid line : Areas set to [On]


Dashed line: Areas set to [Off]
[Detection line]
The set detection line is displayed in color.
[Line 1]: white, [Line 2]: blue, [Line 3]: green, [Line 4]: red,
[Line 5]: yellow, [Line 6]: light blue, [Line 7]: purple, [Line 8]: pink

Solid line : Lines set to [On]


Dashed line: Lines set to [Off]
[Direction label]
AI-VMD (Cross line detection) displays the orientation labels for Cross Line Counting (Cross line detection: [A], [B], Cross Line Counting: [In], [Out]).
[Detection frame]
When the target object is detected, a frame is displayed.

Red frame: Displays the object in the area where the alarm was generated and the object crossing the line in the setting direction.


Blue frame (For AI-VMD and Cross Line Counting): 

            Displays the detected objects.
(For Area Counting/Occupancy Detection): Displays the object in the area and the object going outside the setting direction.


Blue frame (Area Counting/Occupancy Detection only): 

            Indicates who are not in all areas.
[Area status] ([AREA1] ~ [AREA8]) (Area Counting/Occupancy Detection only)

[TIME] : Displays the time (timer) exceeding the set number of persons.


[COUNT] : Displays the number of people being detected.


[ALARM!]: When the alarm is detected, [ALARM!] is displayed.
[White dots in detection frame]
Shows the foot position of the person's detection frame.
[Number of counts] (Cross Line Counting only)
The number of objects counted in the set direction is displayed in color for each line.

[Line 1]: white, [Line 2]: blue, [Line 3]: green, [Line 4]: red, [Line 5]: yellow, [Line 6]: light blue, [Line 7]: purple, [Line 8]: pink
[Settings] button
Clicking this button displays the selector switches and thresholds for [Display score] and [Measure score].
[Display score]
When the switch is set to [On], the head score (left) and whole body score (right) are displayed in the upper left corner of the detection frame.
[**] is displayed when the detection score is below the threshold.
[Measure score]
When set to [On], the maximum and minimum values of the detection score (head and whole body) start to be measured and the measurement result (MAX/MIN) is displayed on the demonstration screen. When set to [Off], measurement is stopped.
[Icon]
If the display score is [On], the Detection object icon is displayed in the upper left corner of the detection frame.
a, person; b, vehicle

・Use the Mozilla Firefox, Google™ Chrome™, and Microsoft Edge to display the demo screen.
It does not support Internet Explorer.


・Only one browser can display the demo screen. Simultaneous access by multiple browsers is not supported.
Simultaneous displays of AI-VMD, Cross Line Counting, Area Counting, and Occupancy Detection demo screens are not supported.


・If [On] is selected for data encryption, no image is displayed on the demo screen.


・If used at the same time as the other The Extension Software, the position of the detection frame may be misaligned with the person on the demo screen.


・It is not recommended to use the demonstration screen in actual operation because it is intended for demonstration.


・If [Display score] is set to [Off], [Measure score] cannot be set to On.