1. Home
  2. Surveillance
  3. Learning and Support
  4. Knowledge Base
  5. Release Note
  6. WJ-NX510, NX410, NX310 Release Note

WJ-NX510, NX410, NX310 Release Note

Update on February 27, 2025
i-PRO Co., Ltd.

Download Firmware: WJ-NX510 etc. Firmware | WJ-NX310 Firmware

Applicable model list

WJ-NX510KG , WJ-NX510K , WJ-NX410KG , WJ-NX410K, WJ-NX310KG , WJ-NX310K


Priority Rank Level:   
 🅰︎: Recommended to apply
 🅱: When issue happened
 🅲: Maintenance timing

Released Versions:
V1.40 | V1.30 or earlier

Version 1.40 

Release date: February 27, 2025

New Features / Improvements 

  • Support the noise filtering function to remove noise during audio playback. [More details(*1)]
  • Support  multicast connection for ONVIF connected cameras. Added a [Communication method for ONVIF connection] setting to the [Advanced setup] tab in [Camera].
  • Added a [Auto exit from setup screen] setting to the [Advanced setup] tab in [Security].
    *If no operations are performed on the setup screen for a certain period of time, the setting window will automatically close.
  • Added a [Web browser] to the [Advanced setup] tab in [Security] to enable or disable access via web browser.
  • Added a [The camera with ONVIF connection is not detected] checkbox to the [Advanced setup] tab in [Camera].
  • Added the following settings for time adjustment using I/O terminal: 
    - "Time adjustment I/O" to the [General purpose I/O terminal setting] in the [System management] under [Maintenanc]. 
    - [Auto time adjustment] setting to the [Date & time settings] tab in [Data/Language].
      *[General purpose I/O terminal setting] needs to be "Time adjustment I/O" first to use this function.
  • Improved the [Auto data delete] in [Maintenance] by adding a menu to select from "1～999" days.
  • Added item of "6 h","12 h" and "24 h" to the [Display interval] setting in thumbnail search.
  • Support restricting the execution authority of  [Reset all settings], [Restoration of the setting values], and [Load data (from USB medium)] to administrators only.
  • Added item of "30 min", "45 min" and "60 min" to the [Event recording duration] setting under the [Event recording] in the [Recording setup] tab of [REC & event]. 
  • Enhanced security.

 

See more details of feature improvements *1

 

*1 Voice noise suppression

Remove noise during audio playback on the NVR without additional system.​

ON/OFF can be switched during playback of recordings.​

[How to ] Check the “Voice noise suppression” and playback.
​[Available data] Audio data recorded on NVR above. ​
[Supported sound] AAC-LC (G.711 is not supported)​
[Output ] HDMI audio output only.​

​

​[Notice]  -Live sound data is not supported.​
-The technology is designed to extract speech that appears to be       spoken, ​but there is no guarantee that only noise will be removed.
-Other sounds may also be removed​.
-Noise may remain depending on the volume and type of noise.​

 
 

 

Resolved Issues 

Corrected the following issues including other minor issue:

  • Corrected an issue where Default gateway value did not change automatically on the [Maintenance] window even after PC port was set from "Auto (DHCP)" to "Static" successfully. 🅲
  • Corrected an issue where the recorder might not start showing “STARTING UP” on rare occasion. 🅲
    Occurrence condition: Turn off and on the recorder repeatedly.
  • Corrected an issue where copying recorded images did not start. 🅲
    Occurrence condition: 
    - Access the recorder over HTTPS with web browser.
    - Version 1.20 and 1.30