LPR Setting Guide for High zoom bullet
This document is intended to provide guidelines for the installation and configuration of LPR for X series High zoom bullet.
Recommend model:
WV-X15502-Z1L,WV-X15502-Z1LN, WV-X15302-Z1L, WV-X15302-Z1LN
Overview: Installation & Setting Procedure
1. Camera installation
1-1. Installation conditions
The following four items must be met as installation conditions.
*Remarks |
pSide angle example
pLooking down angle example
|
1-2. Adjusting the angle of view
Step1. Adjust the angle of view according to the width of the lane.
If you park your vehicle on private land and can adjust the angle of view, you can adjust the angle of view more appropriately by adjusting the height of the license plate and "Center frame" to be the same.
Step2. Fine-tune the zoom/focus on the “LPR Setting guide” screen.
Note
For cameras that do not support LPF, when taking black-and-white images at night, it may be difficult to focus due to the effects of both visible light and IR light. In that case, the problem may be improved by using one of the solutions below.
- Set "IR-LED Light Intensity" to "Low".
- Use the "auto focus frame" to adjust the area you want to focus on.
2. Camera settings
2-1. Image quality adjustment
Cameras automatically determines various parameters for image quality adjustment using the Zoom, Height, and Speed information that you set up and enter, and the installation Angle information available from the gyro sensor in the camera
2-2. Preset registration
|
When you click the “Set” button, the contents set in Step 1 can be registered.
When the zoom is inadvertently changed after setting or the focus is shifted, the registered setting values can be immediately restored.
|
If you click the “Set” button again, the preset is overwritten and saved to Preset No. 1.
3. App settings
3-1. Open the app screen
When you click this gear button, you can display the Vaxrtor application screen.
3-2. VaxALPR App settings
Select the app settings for each VMS environment.
Video Insight : VaxALPR Integration with i-PRO Active Guard for Video Insight | i-PRO Products
Miletone : VaxALPR Integration with i-PRO Active Guard for Milestone | i-PRO Products
Genetec : VaxALPR Integration with i-PRO Active Guard for Genetec | i-PRO Products
Luxriot : VaxALPR Integration with i-PRO Active Guard for Luxriot | i-PRO Products
Appendix: linkage between AI-VMD and Vaxtor apps
Case Study
Suitable for operations where you usually shoot in wide range, such as in front of the gate of a parking lot or private property, and then zoom in and perform LPR only when a vehicle arrives.
|
|
1. Usually monitored by Wide (Home position)
2. AI-VMD detects a vehicle
3. Moves to preset position 1 by alarm interlocking function
4. The angle of view is suitable for LPR, and license plates are recognized
5. After stopping for a few seconds, the self-return function returns to the home position
Setting Procedure
|
|
Step1. Set “Home position” and “Self return”
|
1. Set the viewing angle to the Wide. |
|
(*1) Preset No. 1 is used in the "LPR Setting Guide", so you need to specify a different number.
Step2. Configure "AI-VMD settings"
Setup > Ext. software > AI-VMD
1. Set the AI-VMD area in front of the direction of vehicle intrusion relative to the angle of view adjusted for LPR.
2. Set “Detection object” to “Vehicle” and “Detection mode” to “Intruder”.
Step3. Configure "TCP alarm settings“
Setup > Alarm > Notification
1. Set “TCP alarm notification” to “On”.
2. Set “1818” as “Destination port”.
3. Check “Alarm” for “Destination of notification”.
4. Set the camera's IP address (Ex. 192.168.0.10) to “Destination server address”.
Step4. Configure “Command alarm settings“
|
Setup > Alarm > Alarm 
|
|