9.2 How to operate the setup menu
Menu buttons
Setup page
 
1.
Click the desired button in the frame on the left of the window to display the respective setup menu.
When there are tabs at the top of the “Setup” page displayed in the frame on the right of the window, click the desired tab to display and configure the setting items relating to the name of the tab.
2.
Complete each setting item displayed in the frame on the right of the window.
3.
After completing each setting item, click the [Set] button to apply them.
IMPORTANT
•
When there are two or more [Set] and [Execute] buttons on the page, click the button respective to the edited setting item.
<Example>
When completing the setting items in field , click the [Set] button () below field ().
The edited settings in field will not be applied unless the [Set] button () below field () is clicked.
In the same manner as above, click the [Set] button () below field when completing the setting items in field .
Note
•
An asterisk (*) is suffixed to a target item name (example: “JPEG image refresh interval*”) when a setting value has an asterisk.
For the meaning of the asterisk (*) attached to a setting value, refer to the relevant explanation page.