-----------------------------------------------------------
Firmware update software
Read Me First
Copyright (c) 2006 Matsushita Electric Industrial Co., Ltd.
-----------------------------------------------------------
1.Introduction
This software upgrades the software currently used without initializing the setting values.
<Applicable models>
 WV-CU650 / 950 Series
 WJ-SX650 Series
 WJ-SX150 Series

2.The firmware of the target models.
Prepare the firmware of the target model to implement version up.
The file name of the firmware to handle by this software is only the following form b(Model No_ version).

<Firmware file name>
EWV-CU650 / 950 Series    :     cu650_vxxxxx_yyyy.hex
EWJ-SX650 Series          :     sx650_vxxxxx_yyyy.mot
EWJ-SX150 Series          :     sx150_vxxxxx_yyyy.mot
                                  (x is g0,1,2, ...,9h, y is g0,1,2, ...,9h,A,B, ...,Fh)

Important : Do not change the file name of the firmware.

3.Explains version up procedure of software and firmware as follow ;

4.System requirement of a PC
OS : Microsoft Windows 2000 Professional SP4
     Microsoft Windows XP Professional SP2
     Microsoft Windows XP Home Edition SP2
Note : To work WJ-SX650 Series Administrator console on the PC, Microsoft R .NET Framework 1.1 needs to be installed.
If you try to install WJ-SX650 Series Administrator console on a PC without Microsoft R .NET Framework 1.1 it will be installed along with the console.
   PC : IBM PC / AT Compatible
   CPU : Intel Pentium R 3,500MHz or faster
   Memory : 128MB or more
   CD-ROM drive : Required for installation of WJ-SX650 Series Administrator Console.
Hard drive space : 30MB or more for installation of WJ-SX650 Series Administrator Console.
   Note : If Microsoft R .NET Frame work 1.1 has not been installed on the PC, 160MBor more is required.
   Monitor : 1024 x 768 pixels or more, High color 16-bit or more.
Serial Interface : D-SUB n9 pin connector.

5.Installation and Un installation
*Installation
1)Insert the software "Setup.exe" of Firmware version up software to hard disk drive of PC.
2)Double ? click "Setup exe" => The installation wizard will be displayed on the PC screen.
3)Click "OK" and follow the directions.
Note : In the factory default installation,
uC:\Program Files\Panasonic\Firmwarev is created, and files will be copied to the directory.

*Un Installation
1)Select "Control Panel" ? "Add / Remove Programs". "Add / Remove Programs" window will be displayed on the PC screen.
2)Select uFirmware version up softwarevand click "Remove" or "Change / Remove" and follow the directions.
Important : If "Firmware version up software" has already installed on a PC, installation is impossible. Install the application again after un installation. 

6.Starting up
1)Select "Start" ? "All Programs" ? "Panasonic" ? "Firmware version up software" ? "Firmware version up softwarex.xx"  (x.xx is the version number) Then, run the program. Firmware version up software will start up, and the login window will be displayed on the PC screen.
2)Enter the user name and password. The factory default is as follows.
User Name : user
Password : 12345
3)Click "OK" window is displayed.
4)To version up firmware with "Firmware version up software" , click on the icon pointed of the applicable models.
<Applicable models>
 WV-CU650 / 950 Series
 WJ-SX650 Series
 WJ-SX150 Series
 => displayed selected windows, click "Reference" and select version up firmware from applicable models.
5)To version up firmware of applicable models and follow the directions.
*Refer to Operating Instruction Manual for how to connect the unit and PC.  
*Must be change User Name and Password.
 Click "USER SET" => enter user name and password => click "OK"
         
Completed Firmware version up of applicable models with "Firmware version up software".
To be checking performance of units and be finished version up installation.

7.Copyright
All copyright and intellectual rights for this software incorporated herein are the property of, or under license to Matsushita Electric Industrial Co., Ltd.
Those right are never transferred to the customers.

Anything in the foregoing to the contrary notwithstanding, Matsushita shall have no obligation for any defects in the physical media on which the Program is furnished resulting from your storage thereof, or for defects that have been caused by operation of the physical media otherwise than as, or in environmental conditions other than those, specified by Matsushita, by accident, misuse, neglect, abuse, mishandling, misapplication, modification, alteration acts of God or by improper installation or maintenance.

MATSUSHITA ASSUMES NO RISK OF, AND SHALL NOT IN ANY CASE BE LIABLE FOR, ANY DAMAGE, INCLUDING, WITHOUT LIMITATION ANY SPECIAL FROM BREACH OR WARRANTY OR CONTRACT, NEGLIGENCE OR ANY OTHERE LEGAL THEORY, INCLUDING WITHOUT LIMITATION, LOSS OF GOODWILL, PROFITS OR REVENUE, LOSS OF THE PROGRAM, PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT, FACILITIES OR SERVICES, DOWNTIME COSTS, OR CLAIMS OF ANY PARTY DEALING WITH YOU FOR SUCH DAMAGES.

Copyright (c) 2006 Matsushita electric Industrial Co., Ltd
