====================================================================================
                          i-PRO Configuration Tool (iCT)
                                   Read Me First
                             (c) i-PRO Co., Ltd. 2022
====================================================================================

1. Introduction
  This contains i-PRO Configuration Tool (iCT).



2. Contents
    This has the following contents.
      |
      |--[AdminConsole]
      |   |-- AdminConsole.msi
      |   |-- uninstall_old.bat
      |
      |--[dotNetFramework]
      |   |-- ndp48-x86-x64-allos-enu.exe
      |
      |--[VCRUNTIME2015]
      |   |-- VC_redist.x86.exe
      |
      |--[VCRUNTIME2013]
      |   |-- vcredist_x86.exe
      |
      |--[VCRUNTIME2005]
      |   |-- vcredist_x86.exe
      |
      |-- settings.ini
      |
      |-- Setup.exe
      |
      |--[Instructions]
      |   |-- i-PRO Configuration Tool (iCT).pdf
      |   |-- Available function list for each compatible device.pdf
      |
      |-- Readme(P).txt

  ImportantjAdobe(R) Reader is required to refer to the instructions. 
             When the Adobe(R) Reader is not installed on the PC, download the latest
             Adobe(R) Reader from the Adobe web site and install it.



3. Copyright
    All copyrights and intellectual rights for this software incorporated herein are
    the property of, or under license to i-PRO Co., Ltd.
    Those rights are never transferred to the customers.

    Anything in the foregoing to the contrary notwithstanding, i-PRO Co., Ltd. shall
    have no obligation for any defects in the physical media on which the Program is
    furnished resulting from your storage thereof, or for defects that have been caused
    by operation of the physical media otherwise than as, or in environmental conditions
    other than those, specified by i-PRO Co., Ltd., by accident, misuse,  neglect, abuse,
    mishandling, misapplication, modification, alteration acts of  God or by improper
    installation or maintenance.

    i-PRO Co., Ltd. ASSUMES NO RISK OF, AND SHALL NOT IN ANY CASE BE LIABLE FOR, ANY
    DAMAGE, INCLUDING, WITHOUT LIMITATION ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR
    PUNITIVE DAMAGES, ARISING FROM BREACH OR WARRANTY OR CONTRACT,
    NEGLIGENCE OR ANY OTHER LEGAL THEORY, INCLUDING WITHOUT LIMITATION,
    LOSS OF GOODWILL, PROFITS OR REVENUE, LOSS OF THE PROGRAM, PRODUCT OR
    ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF ANY
    SUBSTITUTE EQUIPMENT, FACILITIES OR SERVICES, DOWNTIME COSTS,
    OR CLAIMS OF ANY PARTY DEALING WITH YOU FOR SUCH DAMAGES.

    Copyright (c) 2022 i-PRO Co., Ltd.



4. Note
  - For installation, be sure to execute it from "setup.exe" with the zip file fully expanded.
    It is not possible to install from a state where the contents are only visible with the without extracting the zip file.
    In addition, please make sure that the folder path of the installation source does not include the parenthesis "(" or ")".

  - When using ND400(ver.1.0), do not change the FTP port number from "21"(default).

  - When disposing of or transferring the PC that uses this software,
    be sure to delete the device setting information set / acquired by this software and uninstall this software.

  - For about the "Configure Cameras: Set PC time to the camera", setting result may differ in seconds
    depending on the network and camera conditions.

  - Former name of i-PRO Co., Ltd. is shown partially, but this software can be used properly.

  - When leaving your PC, be sure to lock your PC screen to prevent others from operating this tool.
