How to install

The following shows how to mount the camera on the tripod (locally procured).

< Sample of camera mounting on tripod >

Important:

・The tripod and CCU shall be horizontally placed.

・The CCU shall be horizontally placed. Do not place the unit in an upright or tilted position.

How to mount lens

Important:

・A lens whose projection length of the lens mount section is 4 mm {5/32 inches} or less shall be used.

・The recommended lens aperture ranges from F4.0 to F16. Selection of less than F4.0 of the lens aperture may result in image blurring.

・When a zoom lens is used, focus adjustment method varies with the lens. For further information, refer to the operating instructions for the lens.

・When the lens is removed, be sure to put the cap on the lens mount section of the camera head.

STEP1
Remove the cap from the lens mount section of the camera head.

STEP2
Turn a C-mount lens clockwise to engage the lens with the lens mount section.

Important:

・Check to see whether the surface of the optical filter is clean before mounting a lens. If the surface is dirty, use a blower brush for general camera to remove dust.