Parts and functions

Camera head

　　　＜2MOS/3MOS Camera head＞　　　　　　　＜1MOS Camera head＞
Important

･ Be sure to turn off the power (Stand-by) of the CCU before connecting or disconnecting the camera cable.


･ Avoid bending excessively or breaking the camera cable.


･ Use the specific-camera head only.

①
Lens mount section
C-mount lens is mounted on this section.

②
Camera cable connector
One of the following optional camera cable is connected to this connector.
  GP-UC532G**A

※ GP-UC532G** (cables that do not end in A) cannot be used.



③
Tripod mount base
The tripod socket hole is used when the camera head is secured to the tripod.
  Tripod socket hole : 1/4-20 UNC

Camera control unit (CCU)

＜Front＞
The front panel is coverd with a protective sheet.
Since the performance is not affected, please use the product with the protective sheet removed if necessary.
④
Power status lamp (Green)
  On : While the power is turned on.
  Off : While the power is turned off (stand-by).

⑤
Power On/Off(Stand-by) switch []
This switch toggles the power of the CCU and camera head on and off (stand-by).

⑥
Menu button [MENU]
Press and hold for 1 second or more to display the SETUP menu (ADVANCED MENU).
When the SETUP menu is displayed and the cursor is on a submenu screen, pressing this button will move up a menu hierarchy. Pressing this button for 1 second or more will hide the SETUP menu.
If you press this button when the SETUP menu is not displayed, the screen freeze function will be activated.

・For information about SETUP menu (QUICK MENU, ADVANCED MENU, MAINTENANCE MENU), refer to the "Operating Instructions (OSD)".



⑦
Page button [PROFILE/PAGE]
When the SETUP menu is displayed, press this to move to the next page.
When pressed except when the SETUP menu is displayed, switches the settings between "VIDEO OUTPUT HDMI/SDI 1" and "VIDEO OUTPUT HDMI/SDI 2".
When pressed while the QUICK MENU is displayed, it changes pages.

⑧
Profile button [PROFILE]
Select a profile from 1 to 6.
Set each profile in advance in the SETUP menu.

⑨
Up button []
While the SETUP menu is displayed, the following two operations are possible.

・Move the cursor to switch setting items.


・When on a submenu screen of an item that can be adjusted vertically (such as the [COLOR MATRIX] USER AREA screen), vertical adjustment is performed.


When pressed except when the SETUP menu is displayed, it switches between "FLIP+MIRROR".
⑩
Down button []
Please refer to ⑨ above.

⑪
Left button []
While the SETUP menu is displayed, the following three operations are possible.

・Change the setting value of the item where the cursor is located (in the case of LEVEL adjustment, adjust in the ± direction)


・When on a submenu screen of an item that can be adjusted left and right (such as the [COLOR MATRIX] USER AREA screen), adjust left and right.


・When the SETUP menu is displayed and the cursor is on the bottom line ([EXP(RGB,IR) PIC(RGB,IR,MIX)


CONTR(RGB,IR) F1 F2 SYS]), it will move to each setting screen.
When pressed except when the SETUP menu is displayed, the "DIGITAL ZOOM" magnification is changed.

⑫
Right Button []
Please refer to ⑪ above.

⑬
Select button [SEL]
While the SETUP menu is displayed, the following four operations are possible.

・If the cursor is on an item that is a submenu item, it will transition to the submenu.


・If the cursor is on an action command such as "CANCEL", "SET (NEW SETTING)", "RET", "END", or "RESET", the corresponding action will be performed.


・If you are on the submenu screen for the "USER PROFILE ID" or "USER PROFILE LABEL" item, select the string indicated by the cursor as the ID/LABEL.


・When the cursor is on "AUTO(SET)" in the "WHITE SHADING" item, automatic adjustment of white shading will start.


When you press this button other than when the SETUP menu is displayed, the "SETTING INFORMATION" screen will be displayed. Press again to return to the camera image.
"SETTING INFORMATION" displays the settings for "IE FUNCTION SELECT", "FOOTSW CONTROL CH1/CH2", "SAVE/LOAD MODE (USB)", and "VIDEO FORMAT (HDMI1/HDMI2/SDI1/SDI2)".

⑭
IE (IMAGE ENHANCEMENT) button [IE]
Switches the IE ON/OFF setting.

⑮
IE status lump (Green)
Displays the ON/OFF setting status of IE.
　On: IE function ON
　Off: IE function OFF

⑯
AWC (Automatic White balance Control) button [WB]
When "WHITE BAL MODE" in the SETUP menu is set to "AWC", pressing this button briefly while the camera image is displayed will start AWC.

・If the camera head is not connected, the [WB] button will not work.



⑰
AWC status lump (Orange)
Displays the AWC status.
　Off: AWC stopped
　Blinking: AWC is running
　Blinking → Off: AWC successful
　On: AWC error
⑱
AE (Automatic Exposure) button [AE]
Switches between Auto/Manual AE settings.

⑲
AE status lump (Green)
Displays the Auto/Manual setting status of AE.
　On: Auto Exposure
　Off: Manual Exposure

⑳
Red Volume [RED]
Adjusts the offset for the RED gain of the white balance.
When the adjustment screen is displayed, you can press the [PAGE] button to switch the DETAIL BAND settings.
When the SETUP menu is displayed, turn it to change the selected item.

㉑
Blue Volume [BLUE]
Adjust the offset for the white balance BLUE gain.
When the adjustment screen is displayed, you can press the [PAGE] button to switch the DETAIL LEVEL setting.

㉒
Level Volume [LEVEL]
Adjusts the brightness level up or down.
While the adjustment screen is displayed, you can press the [PAGE] button to increase or decrease the IE FUNCTION LEVEL(RGB).
When the SETUP menu is displayed, turn it to move the cursor or change the settings of the selected items.
＜Rear＞

㉓
HDMI output connector [HDMI OUT 1]
Used when connecting to an HDMI compatible monitor.

㉔
HDMI output connector [HDMI OUT 2]
Used when connecting to an HDMI compatible monitor.

・We recommend using a Panasonic HDMI cable (sold separately).


・When using VIDEO OUT with 2160p output YPbPr (422) 10BIT, use an HDMI cable that supports 18Gbps (sold separately).


・Please use a monitor that has the HDMI logo.
㉕
SDI output connector [SDI-1]
Outputs 12G-SDI, 3G-SDI signals.

㉖
SDI output connector [SDI-2]
Outputs 12G-SDI, 3G-SDI signals.

・For information on the video screen compatibility of each output, refer to the "Operating Instructions (OSD)".
㉗
Foot switch terminal [FOOT-SW]
Terminal for connecting a foot switch. (φ3.5 stereo mini jack)
㉘
Remote terminal [REMOTE]
This port is used to perform external control. (ø3.5 mini jack, 3-pole, serial)
㉙
Function switch
This switch sets the function of each video output.
Switch 1 selects the frame frequency: 59.94 Hz/50 Hz.
Switches 2, 3, and 4 are fixed ON.
Switch 5 selects the output format 3840x2160/1920x1080 for HDMI OUT 1 and SDI OUT 1.
Switch 6 selects the output format 3840x2160/1920x1080 for HDMI OUT 2 and SDI OUT 2.
DIPSW
Frame Rate
HDMI
OUT 1
HDMI
OUT 2
SDI
OUT 1
SDI
OUT 2
1
2, 3, 4
5
6
ON
ON
ON
ON

59.94Hz


3840x2160

59.94p


3840x2160

59.94p


3840x2160

59.94p


3840x2160

59.94p


ON
OFF
3840x2160

59.94p


1920x1080

59.94p


3840x2160

59.94p


1920x1080

59.94p


OFF
OFF
1920x1080

59.94p


1920x1080

59.94p


1920x1080

59.94p


1920x1080

59.94p


OFF
ON
ON
50Hz
3840x2160
50p
3840x2160
50p
3840x2160
50p
3840x2160
50p
ON
OFF
3840x2160
50p
1920x1080
50p
3840x2160
50p
1920x1080
50p
OFF
OFF
1920x1080
50p
1920x1080
50p
1920x1080
50p
1920x1080
50p

㉚
Camera cable connector [CAMERA]
One of the following optional camera cable is connected to this connector.
  GP-UC532G**A

※ GP-UC532G** (cables that do not end in A) cannot be used.


・Power output : DC5V＠0.5A 5.5V max.



㉛
USB connector [USB2.0]
Insert a USB memory and save/load the profile.
㉜
12 V DC power terminal [DC 12V IN]
Connector for the external DC power more than 12 V DC (3 A or more).
　Compatible connector : HR10A-7P-6S(73) manufactured by HIROSE ELECTRIC CO., LTD.
㉝
Sync terminal [SYNC]
Inputs or outputs an external sync signal.

㉞
Equipotential terminal []
A terminal for connecting an external equipotential conductor.