Introduction

1．1/2.8-inch 4K or 2K sensor is used, allowing high-definition and high-sensitivity video capture.

2．Equipped with an HDMI and SDI output, realizing lossless signal transmission.

3．A 4K sensor is used on the visible side and a 2K sensor on the IR side, enabling simultaneous visible/IR imaging with 4K output.

 　 (When using 4K2MOS Camera Head / 4K4MOS Camera Head GP-UH832HX/HX1)

4．The CCU can connect from a 4K1MOS Camera Head to a 4K4MOS Camera Head without changing any settings.

⑴ ANY LOSS OR DAMAGE, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT,SPECIAL, CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THEPRODUCT;

⑵ ANY INCONVENIENCE, LOSS, OR DAMAGE CAUSED BY INAPPROPRIATE USE ORNEGLIGENT OPERATION OF THE USER;

⑶ ALL MALFUNCTIONS OR TROUBLES FROM UNAUTHORIZED DISASSEMBLE, REPAIR ORMODIFICATION OF THE PRODUCT BY THE USER, REGARDLESS OF THE CAUSE OF THEMALFUNCTION OR TROUBLE;

⑷ INCONVENIENCE OR ANY LOSS ARISING WHEN IMAGES ARE NOT DISPLAYED, DUE TOANY REASON OR CAUSE INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT;

⑸ ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISINGOUT OF THE SYSTEM COMBINED BY THE DEVICES OF THIRD PARTY;

⑹ ANY CLAIM OR ACTION FOR DAMAGES BROUGHT BY ANY PERSON OR ORGANIZATIONAS A PHOTOGRAPHED SUBJECT DUE TO VIOLATION OF PRIVACY CONCERNING CAMERA'S PICTURE OR SAVED DATA, FOR SOME REASON, BECOMING PUBLIC OR BEING USED FOR ANY PURPOSE;

⑺ LOSS OF REGISTERED DATA CAUSED BY ANY FAILURE (INCLUDING INITIALIZATION OF THE PRODUCT).

･ The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade Dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

･ Microsoft and Windows are registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

･ Other company names and product names described in this manual are trademarks or registered trademarks of each company.

･ The installation should comply with local electrical code.

･ Avoid installing or using this system in the following locations:

  ･ Locations where it may get wet from rain or water splash

  ･ Locations where a chemical agent is used such as a swimming pool

  ･ Locations subject to humidity, dust, steam and oil smoke

  ･ Locations where a radiation, an X-ray, a strong radio wave or a strong magnetic field is generated

  ･ Locations where corrosive gas is produced

  ･ Locations where the temperature is not within 0 ℃ to 40 ℃ {32 ℉ to 104 ℉}

  ･ Locations subject to vibrations (This product is not designed for on-vehicle use.)

  ･ Locations where the temperature may rapidly change such as the peripheral areas of the air outlets of air conditioners or doors facing outside

･ To keep on using with stable performance

  Parts of this product may deteriorate and it may shorten the lifetime of this product when using in locations subject to high temperatures.

  Use this product at temperatures between 0 ℃ to 40 ℃ {32 ℉ to 104 ℉}. Failure to observe this may adversely affect the components inside or cause this product to malfunction. Use of this product at temperatures of 30 ℃ {86 ℉} or lower is recommended without direct heat from heaters in consideration of heat release at the product location.

･ Handle this product with care.

  Do not drop this product, nor apply shock or vibration to the product. Failure to observe this may cause trouble.

･ Radio interference

  Images may be distorted near a transmitting antenna for TV or radio broadcasting signals or electric or magnetic fields (for example, caused by a motor and a transformer).

･ Keep the CCU at least 10 cm away from the surrounding wall.

  If the CCU is installed contacting the wall, heat release is blocked and it may result in malfunction.

･ Cooling fan alarm

  When the cooling fan alarm message is displayed, immediately turn off the power and contact your dealer.

･ Procure a tripod separately.

  The tripod to mount the camera head is not supplied. Prepare it according to the area where the camera is to be installed.

･ Do not touch the lens surface with your bare hands.

  A dirty lens surface causes deterioration of picture quality.

･ We shall not be liable for content compensation, losses of recorded or edited content and any direct or indirect consequent damages caused by failure to record or edit due to faults with this unit. In addition, the same provisions apply after unit is reparied.

･ Do not aim this product at strong light sources.

  A light source such as a spot light may cause a blooming (light bleeding).

･ Do not apply or use organic solvents such as benzene and thinner. The case may become discolored. Follow the precautionary statement when using chemical foil.

･ Cleaning the lens

  Use a lens cleaning paper (used to clean camera lenses or lenses of spectacles). When using solvent, use an alcohols solvent and do not use a thinner or a glass cleaner.

･ i-PRO Co., Ltd. assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation.

･ About USB memory

  USB memory that require a special driver or have password authentication or encryption functions cannot be used.

  Use the USB memory compatible with USB2.0.

  In order to maintain high-speed reading/writing, perform “ScanDisk” or “CheckDisk” with the PC with the Microsoft Windows OS.

  FAT32 is supported. Use a USB memory whose volume is 32 GB or less.

  The USB memory cannot be formatted with CCU.

･ Be sure to remove this product if it is not in use.