2.Connect to the camera

2.1IP Setting Software

Cameras or recorders on the same network can be automatically detected and set up in the network.

Refer to the following for details on the IP Setting Software.
→Click here for more information on the IP Setting Software

2.2Access the camera

1.

Launch a IP Setting Software

・

The model number and MAC address of the detected camera are displayed.

・

The default for [Network Settings] is [DHCP].

・If you cannot obtain an IP address from the DHCP server, set the IP address to 192.168.0.10.

2.

Double-click on the camera's IP address

・

The browser starts and the administrator registration screen is displayed.

・

You need to register as an administrator.

3.

Enter administrator username and password

・

The screen for setting the language and date and time is displayed.

4.

Set the language, date and time, and screen

・

You can set the language and date and time and change the background color of the screen and the layout of the operation panel.

5.

Press [Set]

・

Live image pages is displayed.

2.3About Live image pages

①

Camera title

②

SD recording status indicator

③

Stream information display

④

Snapshot button

⑤

Stream selection display button

⑥

Before/after image comparison switch button

⑦

Support button

⑧

Full screen button

⑨

Camera control panel display button

⑩

[Setup] button

⑪

Stream - [Live view] pull-down menu

⑫

Stream - [Refresh interval] pull-down menu

⑬

Stream - Stream information display

⑭

Main area

⑮

Camera Control Panel-SD Memory Card-[Log/Play]

⑯

Alarm occurrence indication

⑰

Camera Control Panel-SD Memory Card-[Rec. on SD]

⑱

Camera Control Panel-[Mic input volume (Camera to PC)]

⑲

Camera Control Panel-[Brightness]