Camera Control User Defined CGI
Last update: November, 2023
Users can control cameras using user-defined CGI in i-PRO Maximizer. After configuring user-defined CGI in the Management Client, these commands can be executed on the Smart Client.
Please see the following page for an overviwer of i-PRO Maximizer.
The installer and installation manual can be downloaded from [HOW TO INSTALL] on the following page.
i-PRO Maximizer (milestonesys.com)
This page contains the following sample CGI.
Active Clear Sight
AI-VMD
Wiper/Washer
See the Command Document for other CGI.
<Setup in Xprotect Management Client>
1. Select [Server] - [Rules and Events] - [i-PRO Extended Actions]. Click [Configure commands].
2. Click the [Add Command] .
3. You can create a new command.
See <Sample CGI>for some features.
By entering commands in [Request Path] and creating it, you can achieve various operations with Milestone Smart Client. If necessary, enter the [Name] and [Display Name (SC)], and click [OK].
4. The created command will be added, and you'll have the option to enable/disable it.
<How to use Xprotect Smart Client>
5. Start the Smart Client. Click the i-PRO icon at the bottom right of the screen. Select and execute the command you created.
<Sample CGI>
Active Clear Sight
Function | CGI (Request Path) |
Start | cgi-bin/activeclearsight |
AI-VMD
Function | CGI (Request Path) |
Enable | cgi-bin/set_ext1_schedule?installid=272&mon=t1&tue=t1&wed=t1&thu=t1&fri=t1&sat=t1&sun=t1 |
Disable | cgi-bin/set_ext1_schedule?installid=272&mon=off&tue=off&wed=off&thu=off&fri=off&sat=off&sun=off |
Wiper/Washer
Function | CGI (Request Path) |
Wiper Start(High speed) | cgi-bin/camctrl?wiper=high |
Wiper Srart(Low speed) | cgi-bin/camctrl?wiper=low |
Wiper Srart(1 shot) | cgi-bin/camctrl?wiper=1shot |
Wiper Stop | cgi-bin/camctrl?wiper=off |
Washer Start *1 Washer control requires advance settings on the camera browser. |
cgi-bin/camctrl?wiper=with_washer |
*1 Washer control requires advance settings on the camera browser.
1. Select [Setup] > [Basic].
2. Select "Washer control" in [Relay output].
In [Washer Control], detailed settings for washer control can be configured.
Please refer to the WV-SUD638 Operating Instruction for more information.
Milestone XProtect Management Client 2023 R2 /DP 13.0a
i-PRO Maximizer 1.0.1