Welcome to the new Global i-PRO website! Choose your country/region under the Global dropdown!

  1. Home
  2. Surveillance
  3. Training & Support
  4. Support
  5. Technical Information
  6. Product Warranty After Repainting Purchased i-PRO Products

Product Warranty After Repainting

Purchased i-PRO Products

About Repainting

Repainting means that the customer paints the product purchased from i-PRO according to the instructions recommended by i-PRO.


Warranty for Repainting Products

i-PRO’s warranty is applicable to the product repainted by the customer if it is an i-PRO-approved model, and it is repainted according to the instructions recommended by i-PRO. Note that terms and conditions in i-PRO warranty may partially be changed.
Repainting must be done by the customer according to the instructions recommended by i-PRO.
i-PRO is not liable for any failure or accident of the product caused by repainting.
i-PRO does not guarantee that the product parts repainted by the customer will comply with the RoHS Directive or any other environmental laws and regulations.


Replacement of Products Repainted by Customer 

If i-PRO’s Repair Support Warranty applies, i-PRO will deliver repaired or replacement products or substitutes in their original state and shall comply with Manufacturing standards.


Possibility of Performance Deterioration Due to Repainting

  • i-PRO assumes no responsibility for any loss of product performance due to repainting.
  • As repainting adds weight to the product, its operation speed and acceleration may be affected.
  • As darker repainting absorbs more sunlight, the temperature specifications of the product may degrade.
  • Increased friction on product joints may increase the load and affect the product lifetime.
  • Paints used for repainting must be compatible with plastics and die casting and non-damaging to them.
  • Do not repaint the nameplate with the part number and serial number.
  • Do not repaint the dome cover and lens. Only the exterior of the product can be repainted.
  • Repainting may change the structural tolerance of the product.
  • i-PRO has the right to decide if the i-PRO warranty applies to the product whose performance degradation was caused by repainting.


List of Products Approved for Repainting

S-Series Box Camera
WV-S1536L                             WV-S1536L-B
WV-S1536LN                           WV-S1536LN-B
WV-S1536LTN                         WV-S15500-F3L
WV-S15500-F6L                     WV-S15500-V3L
WV-S15500-V3LN                  WV-S15500-V3LN1
WV-S15600-V2L                     WV-S15600-V2LN
WV-S15700-V2L                     WV-S15700-V2LN

S-Series Dome Camera
WV-S2236L                             WV-S2536LN
WV-S2536L                             WV-S2536LTN

Compact Dome Camera 
WV-S3511L                              WV-S3531L
WV-S3512LM                          WV-S3532LM

AI 360-Degree Fisheye Camera 
WV-S4556L                             WV-S4576L
WV-S4556LM                          WV-S4576LM

PTZ Camera
WV-S6530N                            WV-X6531N

Multi-Sensor Camera
WV-S8543                               WV-S8563L
WV-S8543L                             WV-S8564L
WV-S8544                               WV-S8573L
WV-S8544L                             WV-S8574L


Repainting of Non-Listed Products

Repainting a product not listed on “List of Products Approved for Repainting” will void i-PRO product warranty.