Repainting Instruction
1. Attention
Precautions For All Models
Follow the instructions below for repainting products.
- Apply a primer before repainting to improve paint adhesion.
- Use spray paint for repainting.
- As cameras contain precision parts, do not use baked enamel finishes or dip coatings for repainting.
- Do not disassemble the product or hang the product grabbing the cable when repainting, as they may result in device failure, breakage of the cable, etc.
- Air dry the product after repainting. Do not apply heat using an equipment such as a dryer as it may result in the failure of the precision parts in the product.
- Mask the blue highlighted areas
illustrated below before repainting.
- When repainting a model with ClearSight coating, the dome cover must be masked with its original protective sheet left attached to protect the coating.
2. Repainting Instructions
Supported Models
WV-S2200 Series - WV-S2236L
WV-S2500 Series - WV-S2536L,S2536LN, S2536LTN
WV-S3500 Series - WV-S3511L,S3512LM,S3531L,S3532LM
WV-S4500 Series - WV-S4556L,S4556LM,S4576L,S4576LM
WV-S6500,X6500 Series - WV-S6530N, X6511N, X6531N
WV-S8500 Series - WV-S8543, S8543L, S8544, S8544L, S8563L, S8564L, S8573L, S8574L
Video Instructions
Repainting Instruction for purchased i-PRO cameras - YouTube
WV-S2200 Series
Model No. WV-S2236L
Precautions
- Since the outer material is plastic, use paint compatible with plastic.
- Mask the dome cover and the bottom surface before repainting.
- Do not paint the bottom surface because it has a nameplate on it.

WV-S2500 Series
Model No. WV-S2536L,S2536LN, S2536LTN
Precautions
- Since the outer material is aluminum die casting, use paint compatible with aluminum die casting.
- Mask the dome cover and the bottom surface before repainting.
- Do not paint the bottom surface because it has a nameplate on it.

WV-S3500 Series
Model No. WV-S3511L,S3512LM,S3531L,S3532LM
Precautions
- Since the outer material is aluminum die casting, use paint compatible with aluminum die casting.
- Mask the dome cover, MIC holes, bottom surface, LAN cable before repainting.
- Do not paint the bottom surface because it has a nameplate on it.

WV-S4500 Series
Model No. WV-S4556L,S4556LM,S4576L,S4576LM
Precautions
- Since the outer material is aluminum die casting, use paint compatible with aluminum die casting.
- Mask the dome cover, IR-LED cover, bottom surface, LAN cable and multi-cable before repainting.
- Do not paint the bottom surface because it has a nameplate on it.

WV-S6500,X6500 Series
Model No. WV-S6530N,X6511N,X6531N
Precautions
- Since the external material is plastic, use paint compatible with plastic.
- Mask the dome cover and bottom surface before repainting.
- Paint the accessories as well.
- Do not paint the nameplate inside the main sunshield rear cover.

WV-S8500 Series
Model No. WV-S8543,S8543L,S8544,S8544L,S8563L,S8564L,S8573L,S8574L
Precautions
- Since the external material is aluminum die casting and plastic, use paints compatible with aluminum die casting and plastic.
- Mask the dome cover, IR-LED cover, and bottom surface before repainting.
- Paint the plastic accessory as well.
- Do not paint the bottom surface because it has a nameplate on it.
