Audio

WV-SMR10 i-PRO

360-degree Microphone

DISCONTINUED PRODUCT

Network Microphone

  • 360-degree audio monitoring

Microphone

COMPONENT SPECIFICATION
Microphone Element Electret condenser microphone (16-element)
Sensitivity -15 dBFS±3 dB (1 Pa, 1 kHz)
Maximum Input 100 dBSPL rms
S/N Ratio 66 dB or more
Dynamic Range 72 dB or more
Frequency Band Approx. 300 Hz - 7 kHz
Noise Suppression Sapacity Approx. 18 dB (suppression capacity of sound other than the sound collecting direction)
Directional Angle Approx. 20° (1 kHz, half-width at half maximum)
Sound Collecting Distance Approx. 6 m {19.69 feet} (audible distance in an environment where the noise volume is about 65 dB SPL)
The sound quality may deteriorate depending on obstacles surrounding the microphone and the direction in which the person speaking faces.

Network

COMPONENT SPECIFICATION
Network IF 10Base-T / 100Base-TX, RJ-45 connector
Audio Compression Method 16-channel Panasonic codec, approx. 2 Mbps
Supported Protocol IPv6: TCP/IP, UDP/IP, HTTP, HTTPS, RTP, DNS, NTP, SNMP, DHCPv6, MLD, ICMP, ARP
IPv4: TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP, DHCP, DNS, DDNS, NTP, SNMP, UPnP, IGMP, ICMP, ARP
Supported OS Microsoft® Windows® 8.1, Microsoft® Windows® 8, Microsoft® Windows® 7, Microsoft® Windows Vista®
Supported Browser Windows® Internet Explorer® 11.0 (32 bit), Windows® Internet Explorer® 10.0 (32 bit), Windows® Internet Explorer® 9.0 (32 bit), Windows® Internet Explorer® 8.0 (32 bit), Windows® Internet Explorer® 7.0 (32 bit)
No. of Simultaneous Users 3 (Number of sessions that can connect to microphones at the same time)
* Depends on network conditions. For example, when accessing the microphone using HTTPS, the number of sessions that can connect to the microphone at the same time is 2.
Refer to “10.4 Access the microphone using the HTTPS protocol” in the Operating Instructions for further information.
Supported Network Camera WV-SF438 (same as WV-SMR10N3) / WV-SF448E / WV-SW458
Supported Recorder WJ-NV300 / WJ-ND400
Supported Application WV-ASM200 (Ver.3.0 or later)

General

COMPONENT SPECIFICATION
Safety/EMC Standard CE, IEC60950-1 (EN55032 ClassB, EN55024)
Power Source and Power Consumption 12 V DC*: 200 mA/ 2.4 W / PoE 48 V: 60 mA/ 2.9 W (Class 1 devices)
* ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY
(UL 1310/CSA 223) or LIMITED POWER SOURCE (IEC/EN/UL/CSA 60950-1).
Ambient Operating Temperature –10 °C to +50 °C {14 °F to 122 °F}
Ambient Operating Humidity Less than 90 % (no condensation)
Shock Resistance Compliant with 20J (IEC60068-2-75)/IK10 (IEC 62262)
Dimensions ø270 mm x 55 mm (H) {ø10-5/8 inches x 2-5/32 inches (H)}
Mass (Approx.) 2.3 kg {5.08 lbs}
Finish Net: SECC punching, sail white
Cover: PC resin, sail white
Others Tamper-resistant enclosure (When center cover is attached)

Specifications

Data Sheet

A&E Spec Sheet

Manuals

Installation Guide

User Manual/Operating Instruction

Firmware/Software

Firmware

Image/CAD/BIM

Image Data

WV-SMR10 Product Image(eps)

WV-SMR10 Product Image(eps)

eps(zip), 3500x2300, CMYK
WV-SMR10 Product Image1 (png)

WV-SMR10 Product Image1 (png)

Vandal Resistant Network Microphone WV-SMR10 Product Image 1 (png)
WV-SMR10 Product Image2 (png)

WV-SMR10 Product Image2 (png)

Vandal Resistant Network Microphone WV-SMR10 Product Image From the bottom
WV-SMR10 Product Image3 (png)

WV-SMR10 Product Image3 (png)

Vandal Resistant Network Microphone WV-SMR10 Product Image Right beside
WV-SMR10N3 Product Image(eps)

WV-SMR10N3 Product Image(eps)

eps(zip), 3500x2300, CMYK

CAD Data

Close